[U-Boot] [PATCH 1/2][v2] powerpc/t104xrdb: Add T1040RDB board support

[york sun]

On Oct 18, 2013, at 4:49 AM, Priyanka Jain wrote:

> T1040RDB is Freescale Reference Design Board supporting
> the T1040 QorIQ Power Architecture™ processor.
> 
> T1040RDB board Overview
> -----------------------
> - Four e5500 cores, each with a private 256 KB L2 cache
> - 256 KB shared L3 CoreNet platform cache (CPC)
> - Interconnect CoreNet platform
> - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
>   support
> - Data Path Acceleration Architecture (DPAA) incorporating acceleration
> for the following functions:
>    -  Packet parsing, classification, and distribution
>    -  Queue management for scheduling, packet sequencing, and congestion
>       management
>    -  Cryptography Acceleration
>    - RegEx Pattern Matching Acceleration
>    - IEEE Std 1588 support
>    - Hardware buffer management for buffer allocation and deallocation
> - Ethernet interfaces
>    - Integrated 8-port Gigabit Ethernet switch
>    - Four 1 Gbps Ethernet controllers
> - SERDES Connections, 8 lanes supporting:
>    - PCI
>    - SGMII
>    - QSGMII
>    - SATA 2.0
> - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and
>   Interleaving
> -IFC/Local Bus
>    - NAND flash: 1GB 8-bit NAND flash
>    - NOR: 128MB 16-bit NOR Flash
> - Ethernet
>    - Two on-board RGMII 10/100/1G ethernet ports.
>    - PHY #0 remains powered up during deep-sleep
> - CPLD
> - Clocks
>    - System and DDR clock (SYSCLK, “DDRCLK”)
>    - SERDES clocks
> - Power Supplies
> - USB
>    - Supports two USB 2.0 ports with integrated PHYs
>    - Two type A ports with 5V at 1.5A per port.
> - SDHC
>    - SDHC/SDXC connector
> - SPI
>    - On-board 64MB SPI flash
> - I2C
>    - Devices connected: EEPROM, thermal monitor, VID controller
> - Other IO
>    - Two Serial ports
>    - ProfiBus port
> 
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
> ---
> Based on u-boot-mpc85xx/next branch.
> 
> Changes for v2:
> Updated description with I2c devices, some ethernet specifc configs
> and check of number of DDR controller to <=1,
> 	as T1040 has only one DDR controller



Applied to u-boot-mpc85xx/master after fixing Makefile.

York