[U-Boot] [PATCH] configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

According to the README:

"- CONFIG_SYS_SPD_BUS_NUM
		If SPD EEPROM is on an I2C bus other than the first
		one, specify here. Note that the value must resolve
		to something your driver can deal with."

There is no SPD EEPROM on the imx boards, so ged rid of this option.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 include/configs/imx31_phycore.h | 1 -
 include/configs/mx25pdk.h       | 1 -
 include/configs/mx35pdk.h       | 1 -
 include/configs/mx53ard.h       | 1 -
 include/configs/mx53evk.h       | 1 -
 include/configs/mx53loco.h      | 1 -
 include/configs/mx53smd.h       | 1 -
 7 files changed, 7 deletions(-)

diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 7b55695..ffb67c2 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -37,7 +37,6 @@
 
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 #define CONFIG_SYS_I2C_CLK_OFFSET	I2C2_CLK_OFFSET
 
 #define CONFIG_MXC_UART
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index fb564b0..af6aafa 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -115,7 +115,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM		0 /* I2C1 */
 
 /* RTC */
 #define CONFIG_RTC_IMXDI
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 4b4503c..0a46f4c 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -42,7 +42,6 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM		0 /* I2C1 */
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 60c40c8..797a637 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -46,7 +46,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index d0b5258..3f0d80a 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -39,7 +39,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 
 /* PMIC Configs */
 #define CONFIG_POWER
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 7b735ab..ae43ea3 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -73,7 +73,6 @@
 /* I2C Configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM		0 /* I2C1 */
 
 /* PMIC Controller */
 #define CONFIG_POWER
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index c9618b4..a04e7c7 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -36,7 +36,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
-- 
1.8.1.2