[U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board

[Andreas Bießmann]

Hello Heiko,

On 11/04/2013 10:53 AM, Heiko Schocher wrote:
> Am 04.11.2013 09:53, schrieb Andreas Bießmann:
>> On 11/04/2013 07:40 AM, Heiko Schocher wrote:

<snip>

>>> +    erstl = readl(&rstc->mr)&  AT91_RSTC_MR_ERSTL_MASK;
>>> +
>>> +    /* Need to reset PHY ->  500ms reset */
>>> +    writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
>>> +        AT91_RSTC_MR_URSTEN,&rstc->mr);
>>> +
>>> +    writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST,&rstc->cr);
>>> +
>>> +    /* Wait for end of reset */
>>> +    at91_wait_for_reset(100);
>>
>> You say above, that this will be 500ms reset pulse ... but wait just
>> 100ms. Is that Ok?
>> Please also check the taurus board.
> 
> We should rework this as Wolfgang suggested, or?

Could you please give me a pointer? I can't remember what Wolfgang
suggested here.

Best regards

Andreas Bießmann