[U-Boot] [PATCH 19/34] zynq: Add zynq_zc770 xm010 board support
Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-teki at xilinx.com
Tue Nov 5 18:46:40 CET 2013
ZC770 is a complete development board based on the Xilinx Zynq-7000
All Programmable SoC, similar to ZC70x board but which has four
different daughter cards, like XM010, XM011, XM012 and XM013
ZC770 XM010:
- 1GB DDR3
- 128 Mb Quad-SPI Flash
- 8 Mb SST SI flash
- Full size SD/MMC card cage
- 10/100/1000 Ethernet
- USB-UART
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
boards.cfg | 1 +
include/configs/zynq_zc770.h | 30 ++++++++++++++++++++++++++++++
2 files changed, 31 insertions(+)
create mode 100644 include/configs/zynq_zc770.h
diff --git a/boards.cfg b/boards.cfg
index e85dc0e..73b4843 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -347,6 +347,7 @@ Active arm armv7 vf610 freescale vf610twr
Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
+Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren at nvidia.com>
Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding <thierry.reding at avionic-design.de>
Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Thierry Reding <thierry.reding at avionic-design.de>
diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h
new file mode 100644
index 0000000..4870b3c
--- /dev/null
+++ b/include/configs/zynq_zc770.h
@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration settings for the Xilinx Zynq ZC770 board.
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZC770_H
+#define __CONFIG_ZYNQ_ZC770_H
+
+#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
+
+#define CONFIG_SYS_NO_FLASH
+
+#if defined(CONFIG_ZC770_XM010)
+# define CONFIG_ZYNQ_SERIAL_UART1
+# define CONFIG_ZYNQ_GEM0
+# define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
+# define CONFIG_ZYNQ_SDHCI0
+# define CONFIG_ZYNQ_QSPI
+
+#else
+# define CONFIG_ZYNQ_SERIAL_UART0
+#endif
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZC770_H */
--
1.8.3
More information about the U-Boot
mailing list