[U-Boot] [PATCH v3 0/1] nitrogen6x: Move setup_sata to common part

Giuseppe Pagano giuseppe.pagano at seco.com
Thu Nov 28 10:07:51 CET 2013


Move setup_sata function definition from platform file nitrogen6x.c
to arch/arm/imx-common/sata.c to avoid code duplication.

Signed-off-by: Giuseppe Pagano <giuseppe.pagano at seco.com>
CC: Stefano Babic <sbabic at denx.de>
CC: Fabio Estevam <fabio.estevam at freescale.com>
CC: Eric Nelson <eric.nelson at boundarydevices.com>
---

Changes in v3:
  - Correct Makefile for filter sata.c to be compiled only for mx6
    soc because in function setup_sata there are i.MX6 specific
    registers definition and this breaks mx5 boards. mx5 boards
    does not need setup_sata initialization.

Changes in v2:
  - Split previous patch between nitrogen6x udoo code changes.
---
 arch/arm/imx-common/Makefile           |    3 +++
 arch/arm/imx-common/sata.c             |   33 ++++++++++++++++++++++++++++++++
 arch/arm/include/asm/imx-common/sata.h |   17 ++++++++++++++++
 board/boundary/nitrogen6x/nitrogen6x.c |   27 +-------------------------
 4 files changed, 54 insertions(+), 26 deletions(-)
 create mode 100644 arch/arm/imx-common/sata.c
 create mode 100644 arch/arm/include/asm/imx-common/sata.h

diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 727a052..2656f2d 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -21,6 +21,9 @@ endif
 ifeq ($(SOC),$(filter $(SOC),mx6 mxs))
 COBJS-y	+= misc.o
 endif
+ifeq ($(SOC),$(filter $(SOC),mx6))
+COBJS-$(CONFIG_CMD_SATA) += sata.o
+endif
 COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o
 COBJS-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
 COBJS	:= $(sort $(COBJS-y))
diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c
new file mode 100644
index 0000000..1b4c502
--- /dev/null
+++ b/arch/arm/imx-common/sata.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/arch/iomux.h>
+#include <asm/io.h>
+
+int setup_sata(void)
+{
+	struct iomuxc_base_regs *const iomuxc_regs
+		= (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
+
+	int ret = enable_sata_clock();
+	if (ret)
+		return ret;
+
+	clrsetbits_le32(&iomuxc_regs->gpr[13],
+			IOMUXC_GPR13_SATA_MASK,
+			IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB
+			|IOMUXC_GPR13_SATA_PHY_7_SATA2M
+			|IOMUXC_GPR13_SATA_SPEED_3G
+			|(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
+			|IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED
+			|IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16
+			|IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB
+			|IOMUXC_GPR13_SATA_PHY_2_TX_1P104V
+			|IOMUXC_GPR13_SATA_PHY_1_SLOW);
+
+	return 0;
+}
diff --git a/arch/arm/include/asm/imx-common/sata.h b/arch/arm/include/asm/imx-common/sata.h
new file mode 100644
index 0000000..8bb4493
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/sata.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __IMX_SATA_H_
+#define __IMX_SATA_H_
+
+/*
+ * SATA setup for i.mx6 quad based platform
+ */
+
+int setup_sata(void);
+
+#endif
+
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 1712908..0c26bcb 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -17,6 +17,7 @@
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/sata.h>
 #include <asm/imx-common/boot_mode.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
@@ -378,32 +379,6 @@ static void setup_buttons(void)
 					 ARRAY_SIZE(button_pads));
 }
 
-#ifdef CONFIG_CMD_SATA
-
-int setup_sata(void)
-{
-	struct iomuxc_base_regs *const iomuxc_regs
-		= (struct iomuxc_base_regs *) IOMUXC_BASE_ADDR;
-	int ret = enable_sata_clock();
-	if (ret)
-		return ret;
-
-	clrsetbits_le32(&iomuxc_regs->gpr[13],
-			IOMUXC_GPR13_SATA_MASK,
-			IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB
-			|IOMUXC_GPR13_SATA_PHY_7_SATA2M
-			|IOMUXC_GPR13_SATA_SPEED_3G
-			|(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
-			|IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED
-			|IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16
-			|IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB
-			|IOMUXC_GPR13_SATA_PHY_2_TX_1P104V
-			|IOMUXC_GPR13_SATA_PHY_1_SLOW);
-
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_VIDEO_IPUV3)
 
 static iomux_v3_cfg_t const backlight_pads[] = {
-- 
1.7.10.4



More information about the U-Boot mailing list