[U-Boot] [PATCH v2 0/4] udoo: Move and optimize platform register setting.

[Stefano Babic]

On 15/11/2013 17:42, Giuseppe Pagano wrote:
> Previous uDoo configuration adopts register settings for DDR3, clock, muxing,
> etc. taken from Nitrogen6x. uDoo schematics is rather different from that board,
> and it needs customized setting for most of the registers.
> All this changes can be considered atomical since it is part of initial support
> of the board.
> 
> Patch changes uDoo configuration files path to a specific one, and adopt
> optimized value for every configured register.
> 
> Signed-off-by: Giuseppe Pagano <giuseppe.pagano at seco.com>
> Tested-by: Fabio Estevam <fabio.estevam at freescale.com>
> CC: Stefano Babic <sbabic at denx.de>
> CC: Fabio Estevam <fabio.estevam at freescale.com>
> ---


Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================