[U-Boot] [PATCH v2 0/4] arm, at91: support for the taurus, axm and corvus board

[Heiko Schocher]

add support for the AT91SAM9G20 boards from siemens. For the
taurus and axm board, patch 1 from this series add some needed
defines. Patch 2/4 is new in version 2, moved code for waiting
if reset ends to a common place.

patches are checkpatch clean, and a "./MAKEALL -s at91" compiles
clean.

Heiko Schocher (3):
  arm, at91: add function for waiting if reset ends
  arm, at91: add Siemens board taurus and axm
  arm, at91: add siemens corvus board

Roger Meier (1):
  at91: add defines for reset type

 arch/arm/cpu/arm926ejs/at91/reset.c        |  15 ++
 arch/arm/include/asm/arch-at91/at91_rstc.h |   8 ++
 board/siemens/corvus/Makefile              |  39 ++++++
 board/siemens/corvus/board.c               | 216 +++++++++++++++++++++++++++++
 board/siemens/taurus/Makefile              |  38 +++++
 board/siemens/taurus/taurus.c              | 186 +++++++++++++++++++++++++
 boards.cfg                                 |   3 +
 include/configs/corvus.h                   | 165 ++++++++++++++++++++++
 include/configs/taurus.h                   | 159 +++++++++++++++++++++
 9 files changed, 829 insertions(+)
 create mode 100644 board/siemens/corvus/Makefile
 create mode 100644 board/siemens/corvus/board.c
 create mode 100644 board/siemens/taurus/Makefile
 create mode 100644 board/siemens/taurus/taurus.c
 create mode 100644 include/configs/corvus.h
 create mode 100644 include/configs/taurus.h

Signed-off-by: Heiko Schocher <hs at denx.de>
Cc: Bo Shen <voice.shen at atmel.com>
Cc: Andreas Bießmann <andreas.devel at googlemail.com>
-- 
1.8.3.1