[U-Boot] [U-Boot,v5,09/11] S3C24XX: Add NAND Flash driver

Scott Wood scottwood at freescale.com
Thu Nov 14 02:56:52 CET 2013


On Fri, Sep 21, 2012 at 07:47:46PM +0100, José Miguel Gonçalves wrote:
> NAND Flash driver with HW ECC for the S3C24XX SoCs.
> Currently it only supports SLC NAND chips.
> 
> Signed-off-by: José Miguel Gonçalves <jose.goncalves at inov.pt>
> 
> ---
> Changes for v2:
>    - Coding style cleanup
>    - Use of clrsetbits_le32()
>    - Use of register bit macros instead of magic numbers
> 
> Changes for v3:
>    - Removed magic numbers
>    - Removed a macro to declare a void printf()
>    - Replaced one printf() with a puts()
> 
> Changes for v4:
>    - Coding style cleanup
>    - Use of a struct to store chip private data
>    - Replaced u_long by u32
>    - Replaced u_char by uint8_t
>    - Added error message in s3c_nand_select_chip()
>    - Optimization of s3c_nand_hwcontrol()
> 
> Changes for v5:
>    - Dropped const attribute in the private struct
>    - Added const attribute to 'cs' field in the private struct
> ---
>  drivers/mtd/nand/Makefile       |    1 +
>  drivers/mtd/nand/s3c24xx_nand.c |  255 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 256 insertions(+)
>  create mode 100644 drivers/mtd/nand/s3c24xx_nand.c

Minkyu, what's the status of this patchset?  I don't see any comments in
patchwork.  Is this patch still active and needing my ack?

-Scott



More information about the U-Boot mailing list