[U-Boot] [PATCH 00/34] zynq: More boards support

[Jagannadha Sutradharudu Teki]

These changes are from u-boot-xlnx.git repo from git.xilinx.com
This repo is well tested on xilinx zynq platform, hence pushing
the same on upstream.

--
Thanks,
Jagan.

Jagannadha Sutradharudu Teki (34):
  zynq: Enable CONFIG_FIT_VERBOSE
  zynq: Enable Boot FreeBSD/vxWorks
  zynq: Cleanup on miscellaneous configs
  zynq: Cleanup on memory configs
  zynq: Minor config cleanup
  zynq: Enable cache options
  zynq: Add UART0, UART1 configs support
  zynq: Add GEM0, GEM1 configs support
  zynq-common: Rename zynq with zynq-common
  spi: Add zynq qspi controller driver
  zynq-common: Enable CONFIG_ZYNQ_QSPI
  zynq: Add zynq zc70x board support
  zynq: Add zynq zed board support
  zynq-common: Define CONFIG_SPI_FLASH_BAR
  zynq: Add PHYS_SDRAM_1_SIZE config
  zynq-common: Define exact TEXT_BASE
  zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
  zynq: Add zynq microzed board support
  zynq: Add zynq_zc770 xm010 board support
  zynq: Add zynq_zc770 xm013 board support
  zynq: Add zynq_zc770 xm012 board support
  nand: Add zynq nand controller driver support
  zynq-common: Define CONFIG_NAND_ZYNQ
  zynq: Add zynq_zc770 xm011 board support
  zynq: Add support to find bootmode
  zynq-common: Define default environment
  zynq-common: Change Env. Sector size to 128Kb
  zynq-common: Define flash env. partition
  zynq-common: Define CONFIG_ENV_OVERWRITE
  zynq-common: Define ethaddr in default env.
  dts: zynq: Add basic fdt support
  gpio: zynq: Add dummy gpio routines
  zynq-common: Enable verified boot(RSA)
  dts: zynq: Add more zynq dts files

 arch/arm/cpu/armv7/zynq/slcr.c             |    6 +
 arch/arm/dts/zynq-7000.dtsi                |   13 +
 arch/arm/include/asm/arch-zynq/gpio.h      |   25 +
 arch/arm/include/asm/arch-zynq/hardware.h  |    3 +
 arch/arm/include/asm/arch-zynq/sys_proto.h |    1 +
 board/xilinx/dts/zynq-microzed.dts         |   14 +
 board/xilinx/dts/zynq-zc702.dts            |   14 +
 board/xilinx/dts/zynq-zc706.dts            |   14 +
 board/xilinx/dts/zynq-zc770-xm010.dts      |   14 +
 board/xilinx/dts/zynq-zc770-xm011.dts      |   14 +
 board/xilinx/dts/zynq-zc770-xm012.dts      |   14 +
 board/xilinx/dts/zynq-zc770-xm013.dts      |   14 +
 board/xilinx/dts/zynq-zed.dts              |   14 +
 board/xilinx/zynq/board.c                  |   33 +
 boards.cfg                                 |    9 +-
 drivers/mtd/nand/Makefile                  |    1 +
 drivers/mtd/nand/zynq_nand.c               | 1200 ++++++++++++++++++++++++++++
 drivers/spi/Makefile                       |    1 +
 drivers/spi/zynq_qspi.c                    |  447 +++++++++++
 include/configs/zynq-common.h              |  273 +++++++
 include/configs/zynq.h                     |  139 ----
 include/configs/zynq_microzed.h            |   26 +
 include/configs/zynq_zc70x.h               |   29 +
 include/configs/zynq_zc770.h               |   44 +
 include/configs/zynq_zed.h                 |   27 +
 25 files changed, 2248 insertions(+), 141 deletions(-)
 create mode 100644 arch/arm/dts/zynq-7000.dtsi
 create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h
 create mode 100644 board/xilinx/dts/zynq-microzed.dts
 create mode 100644 board/xilinx/dts/zynq-zc702.dts
 create mode 100644 board/xilinx/dts/zynq-zc706.dts
 create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts
 create mode 100644 board/xilinx/dts/zynq-zc770-xm011.dts
 create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts
 create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts
 create mode 100644 board/xilinx/dts/zynq-zed.dts
 create mode 100644 drivers/mtd/nand/zynq_nand.c
 create mode 100644 drivers/spi/zynq_qspi.c
 create mode 100644 include/configs/zynq-common.h
 delete mode 100644 include/configs/zynq.h
 create mode 100644 include/configs/zynq_microzed.h
 create mode 100644 include/configs/zynq_zc70x.h
 create mode 100644 include/configs/zynq_zc770.h
 create mode 100644 include/configs/zynq_zed.h

-- 
1.8.3