[U-Boot] [PATCH V2] i2c: mxs_i2c: Squash endless loop
Marek Vasut
marex at denx.de
Mon Nov 4 14:29:12 CET 2013
The endless waiting for a bit to be set can cause a hang, add a timeout
so we prevent such situation. A testcase for such a hang is below. The
testcase assumes a device to be present at address 0x50 and a device to
NOT be present at address 0x42 . Also note that the "sleep 1" induced
delays are imperative for this bug to manifest .
i2c read 0x42 0x0.2 0x10 0x42000000 ; sleep 1 ; \
i2c read 0x50 0x0.2 0x10 0x42000000 ; sleep 1 ; \
i2c read 0x42 0x0.2 0x10 0x42000000
The expected result of the above command is:
Error reading the chip.
Error reading the chip.
While without this patch, we observe a hang in the last read from 0x42
precisely when waiting for this bit to be set.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Heiko Schocher <hs at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
---
drivers/i2c/mxs_i2c.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
V2: Replace -EINVAL with -ETIMEDOUT
diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c
index 46106b7..a298c95 100644
--- a/drivers/i2c/mxs_i2c.c
+++ b/drivers/i2c/mxs_i2c.c
@@ -150,6 +150,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE;
uint32_t tmp = 0;
+ int timeout = MXS_I2C_MAX_TIMEOUT;
int ret;
int i;
@@ -169,9 +170,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
for (i = 0; i < len; i++) {
if (!(i & 3)) {
- while (readl(&i2c_regs->hw_i2c_queuestat) &
- I2C_QUEUESTAT_RD_QUEUE_EMPTY)
- ;
+ while (--timeout) {
+ tmp = readl(&i2c_regs->hw_i2c_queuestat);
+ if (!(tmp & I2C_QUEUESTAT_RD_QUEUE_EMPTY))
+ break;
+ }
+
+ if (!timeout) {
+ debug("MXS I2C: Failed receiving data!\n");
+ return -ETIMEDOUT;
+ }
+
tmp = readl(&i2c_regs->hw_i2c_queuedata);
}
buffer[i] = tmp & 0xff;
--
1.8.4.rc3
More information about the U-Boot
mailing list