[U-Boot] [PATCH] cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM

[Alexey Brodkin]

Data "offset" is not used directly in case of I2C EEPROM. Istead it is
split into "block number" and "offset within mentioned block". Which are
"addr[0]" and "addr[1]" respectively.

Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>

Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
cc: Peter Tyser <ptyser at xes-inc.com>
Cc: Heiko Schocher <hs at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Stefan Roese <sr at denx.de>
Cc: Mischa Jonker <mjonker at synopsys.com>
---
 common/cmd_eeprom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index ef694d8..02539c4 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -161,7 +161,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
 		spi_read (addr, alen, buffer, len);
 #else
-		if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
+		if (i2c_read (addr[0], addr[1], alen-1, buffer, len) != 0)
 			rcode = 1;
 #endif
 		buffer += len;
@@ -339,7 +339,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		/* Write is enabled ... now write eeprom value.
 		 */
 #endif
-		if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
+		if (i2c_write (addr[0], addr[1], alen-1, buffer, len) != 0)
 			rcode = 1;
 
 #endif
-- 
1.8.4.2