[U-Boot] (no subject)

[Bojan Buić]

I found address of register HW_RTC_WATCHDOG_SET: 0x8005C054

I need write to that register value 0x054 ?

Bojan


2013/11/21 Bojan Buić <bojan.buic at gmail.com>

> Sorry for many questions, but I work once with 8 bit ATmega 8
> microcontroler and nothing more :(
>
> In manual I found this :
>
> HW_RTC_WATCHDOG 0x050
> HW_RTC_WATCHDOG_SET 0x054
> HW_RTC_WATCHDOG_CLR 0x058
> HW_RTC_WATCHDOG_TOG 0x05C
>
>
> and now I do not know which register i need setup to enable watchdog ?
> 0x054? Which value i need write to that register ?
>
> Bojan
>
>
>
> 2013/11/21 Stefano Babic <sbabic at denx.de>
>
>> On 21/11/2013 15:01, Bojan Buić wrote:
>> > Which register I need set up for hard. watchdog ?
>> >
>>
>> Please read carefully Chapter 23 amn 23.8.6 in the User Manuaal, you
>> will find answer to all your question.
>>
>> Best regards,
>> Stefano Babic
>>
>> --
>> =====================================================================
>> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>> =====================================================================
>>
>
>
>
> --
> Bojan Buić
>
>
>


-- 
Bojan Buić