[U-Boot] [PATCH 1/6] driver:i2c:s3c24x0: adapt driver to new i2c
Piotr Wilczek
p.wilczek at samsung.com
Wed Nov 13 15:31:47 CET 2013
The s3c24x0 i2c driver is adapted to new i2c framework.
Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
Cc: Minkyu Kang <mk7.kang at samsung.com>
Cc: Heiko Schocher <hs at denx.de>
---
drivers/i2c/Makefile | 2 +-
drivers/i2c/s3c24x0_i2c.c | 157 +++++++++++++++++++++++++++++----------------
2 files changed, 101 insertions(+), 58 deletions(-)
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 553b519..fa3a875 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
obj-$(CONFIG_I2C_MV) += mv_i2c.o
obj-$(CONFIG_I2C_MXS) += mxs_i2c.o
obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
-obj-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
obj-$(CONFIG_U8500_I2C) += u8500_i2c.o
obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
@@ -24,6 +23,7 @@ obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
+obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index f77a9d1..0051cac 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -23,8 +23,6 @@
#include <i2c.h>
#include "s3c24x0_i2c.h"
-#ifdef CONFIG_HARD_I2C
-
#define I2C_WRITE 0
#define I2C_READ 1
@@ -127,7 +125,6 @@
* For SPL boot some boards need i2c before SDRAM is initialised so force
* variables to live in SRAM
*/
-static unsigned int g_current_bus __attribute__((section(".data")));
static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM]
__attribute__((section(".data")));
@@ -143,6 +140,7 @@ static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
struct s3c24x0_i2c_bus *bus;
bus = &i2c_bus[bus_idx];
+
if (bus->active)
return bus;
}
@@ -254,17 +252,17 @@ static void ReadWriteByte(struct s3c24x0_i2c *i2c)
writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon);
}
-static struct s3c24x0_i2c *get_base_i2c(void)
+static struct s3c24x0_i2c *get_base_i2c(int bus)
{
#ifdef CONFIG_EXYNOS4
struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c()
+ (EXYNOS4_I2C_SPACING
- * g_current_bus));
+ * bus));
return i2c;
#elif defined CONFIG_EXYNOS5
struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c()
+ (EXYNOS5_I2C_SPACING
- * g_current_bus));
+ * bus));
return i2c;
#else
return s3c24x0_get_base_i2c();
@@ -298,7 +296,6 @@ static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd)
writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
}
-#ifdef CONFIG_I2C_MULTI_BUS
static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus)
{
struct exynos5_hsi2c *hsregs = i2c_bus->hsregs;
@@ -307,8 +304,10 @@ static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus)
unsigned int i = 0, utemp0 = 0, utemp1 = 0;
unsigned int t_ftl_cycle;
-#if defined CONFIG_EXYNOS5
+#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
clkin = get_i2c_clk();
+#else
+ clkin = get_PCLK();
#endif
/* FPCLK / FI2C =
* (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
@@ -330,7 +329,6 @@ static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus)
}
return -1;
}
-#endif
static void hsi2c_ch_init(struct s3c24x0_i2c_bus *i2c_bus)
{
@@ -401,49 +399,18 @@ static void exynos5_i2c_reset(struct s3c24x0_i2c_bus *i2c_bus)
hsi2c_ch_init(i2c_bus);
}
-/*
- * MULTI BUS I2C support
- */
-
-#ifdef CONFIG_I2C_MULTI_BUS
-int i2c_set_bus_num(unsigned int bus)
-{
- struct s3c24x0_i2c_bus *i2c_bus;
-
- i2c_bus = get_bus(bus);
- if (!i2c_bus)
- return -1;
- g_current_bus = bus;
-
- if (i2c_bus->is_highspeed) {
- if (hsi2c_get_clk_details(i2c_bus))
- return -1;
- hsi2c_ch_init(i2c_bus);
- } else {
- i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency,
- CONFIG_SYS_I2C_SLAVE);
- }
-
- return 0;
-}
-
-unsigned int i2c_get_bus_num(void)
-{
- return g_current_bus;
-}
-#endif
-
-void i2c_init(int speed, int slaveadd)
+static void s3c24x0_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
{
struct s3c24x0_i2c *i2c;
+ struct s3c24x0_i2c_bus *bus;
+
#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
#endif
ulong start_time = get_timer(0);
/* By default i2c channel 0 is the current bus */
- g_current_bus = 0;
- i2c = get_base_i2c();
+ i2c = get_base_i2c(adap->hwadapnr);
/*
* In case the previous transfer is still going, wait to give it a
@@ -505,6 +472,10 @@ void i2c_init(int speed, int slaveadd)
}
#endif /* #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) */
i2c_ch_init(i2c, speed, slaveadd);
+
+ bus = &i2c_bus[adap->hwadapnr];
+ bus->active = true;
+ bus->regs = i2c;
}
/*
@@ -728,6 +699,29 @@ static int hsi2c_read(struct exynos5_hsi2c *i2c,
return rv;
}
+static unsigned int s3c24x0_i2c_set_bus_speed(struct i2c_adapter *adap,
+ unsigned int speed)
+{
+ struct s3c24x0_i2c_bus *i2c_bus;
+
+ i2c_bus = get_bus(adap->hwadapnr);
+ if (!i2c_bus)
+ return -1;
+
+ i2c_bus->clock_frequency = speed;
+
+ if (i2c_bus->is_highspeed) {
+ if (hsi2c_get_clk_details(i2c_bus))
+ return -1;
+ hsi2c_ch_init(i2c_bus);
+ } else {
+ i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency,
+ CONFIG_SYS_I2C_S3C24X0_SLAVE);
+ }
+
+ return 0;
+}
+
/*
* cmd_type is 0 for write, 1 for read.
*
@@ -840,13 +834,13 @@ bailout:
return result;
}
-int i2c_probe(uchar chip)
+static int s3c24x0_i2c_probe(struct i2c_adapter *adap, uchar chip)
{
struct s3c24x0_i2c_bus *i2c_bus;
uchar buf[1];
int ret;
- i2c_bus = get_bus(g_current_bus);
+ i2c_bus = get_bus(adap->hwadapnr);
if (!i2c_bus)
return -1;
buf[0] = 0;
@@ -864,11 +858,11 @@ int i2c_probe(uchar chip)
I2C_READ, chip << 1, 0, 0, buf, 1);
}
-
return ret != I2C_OK;
}
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int s3c24x0_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
struct s3c24x0_i2c_bus *i2c_bus;
uchar xaddr[4];
@@ -902,7 +896,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
chip |= ((addr >> (alen * 8)) &
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
- i2c_bus = get_bus(g_current_bus);
+ i2c_bus = get_bus(adap->hwadapnr);
if (!i2c_bus)
return -1;
@@ -922,7 +916,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
return 0;
}
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int s3c24x0_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
struct s3c24x0_i2c_bus *i2c_bus;
uchar xaddr[4];
@@ -955,7 +950,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
chip |= ((addr >> (alen * 8)) &
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
- i2c_bus = get_bus(g_current_bus);
+ i2c_bus = get_bus(adap->hwadapnr);
if (!i2c_bus)
return -1;
@@ -1001,8 +996,8 @@ static void process_nodes(const void *blob, int node_list[], int count,
bus->id = pinmux_decode_periph_id(blob, node);
bus->clock_frequency = fdtdec_get_int(blob, node,
- "clock-frequency",
- CONFIG_SYS_I2C_SPEED);
+ "clock-frequency",
+ CONFIG_SYS_I2C_S3C24X0_SPEED);
bus->node = node;
bus->bus_num = i;
exynos_pinmux_config(bus->id, 0);
@@ -1044,7 +1039,6 @@ int i2c_get_bus_num_fdt(int node)
return -1;
}
-#ifdef CONFIG_I2C_MULTI_BUS
int i2c_reset_port_fdt(const void *blob, int node)
{
struct s3c24x0_i2c_bus *i2c_bus;
@@ -1068,12 +1062,61 @@ int i2c_reset_port_fdt(const void *blob, int node)
hsi2c_ch_init(i2c_bus);
} else {
i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency,
- CONFIG_SYS_I2C_SLAVE);
+ CONFIG_SYS_I2C_S3C24X0_SLAVE);
}
return 0;
}
#endif
-#endif
-#endif /* CONFIG_HARD_I2C */
+/*
+ * Register s3c24x0 i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_0, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+ s3c24x0_i2c_read, s3c24x0_i2c_write,
+ s3c24x0_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_S3C24X0_SPEED,
+ CONFIG_SYS_I2C_S3C24X0_SLAVE,
+ 0)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_1, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+ s3c24x0_i2c_read, s3c24x0_i2c_write,
+ s3c24x0_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_S3C24X0_SPEED,
+ CONFIG_SYS_I2C_S3C24X0_SLAVE,
+ 1)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_2, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+ s3c24x0_i2c_read, s3c24x0_i2c_write,
+ s3c24x0_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_S3C24X0_SPEED,
+ CONFIG_SYS_I2C_S3C24X0_SLAVE,
+ 2)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_3, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+ s3c24x0_i2c_read, s3c24x0_i2c_write,
+ s3c24x0_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_S3C24X0_SPEED,
+ CONFIG_SYS_I2C_S3C24X0_SLAVE,
+ 3)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_4, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+ s3c24x0_i2c_read, s3c24x0_i2c_write,
+ s3c24x0_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_S3C24X0_SPEED,
+ CONFIG_SYS_I2C_S3C24X0_SLAVE,
+ 4)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_5, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+ s3c24x0_i2c_read, s3c24x0_i2c_write,
+ s3c24x0_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_S3C24X0_SPEED,
+ CONFIG_SYS_I2C_S3C24X0_SLAVE,
+ 5)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_6, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+ s3c24x0_i2c_read, s3c24x0_i2c_write,
+ s3c24x0_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_S3C24X0_SPEED,
+ CONFIG_SYS_I2C_S3C24X0_SLAVE,
+ 6)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_7, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+ s3c24x0_i2c_read, s3c24x0_i2c_write,
+ s3c24x0_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_S3C24X0_SPEED,
+ CONFIG_SYS_I2C_S3C24X0_SLAVE,
+ 7)
--
1.7.9.5
More information about the U-Boot
mailing list