[U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10

[Wolfgang Denk]

Dear Otavio,

In message <CAP9ODKpAarHeQ3w7dwChkNd7+AY7u3xdBXr4df3Fx2TBTakVtg at mail.gmail.com> you wrote:
> 
> last days I've been trying to isolate the hung cause of a customer
> board, and also SabreSD board, when using the Freescale's Linux fork
> of 3.10.9 with 2013.10 U-Boot.

Do I understand correctly that this happens only with the FSL kernel,
i. e. not with mainline Linux?


What exactly is the effect of calling your set_anatop_bypass()
function?  Why would that be needed on the FSL kernel, and not on
mainline?


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It's hard to make a program foolproof because fools are so ingenious.