[U-Boot] [PATCH] powerpc/t1040: enable PBL tool for T1040

[york sun]

On Oct 1, 2013, at 1:26 AM, Prabhakar Kushwaha wrote:

> Use a default RCW of protocol 0x66.
> A PBI configure file which uses CPC as 256KB SRAM. It can be used by
> PBL tool on T1040 to build a pbl boot image.
> 
> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> ---
> Based upon  git://git.denx.de/u-boot-mpc85xx.git branch next

Applied to u-boot-mpc85xx/master.

York