[U-Boot] Some SuperH boards are broken
Nobuhiro Iwamatsu
nobuhiro.iwamatsu.yj at renesas.com
Mon Nov 18 05:50:26 CET 2013
Hi,
2013/11/18 Masahiro Yamada <yamada.m at jp.panasonic.com>:
> Hello Nobuhiro
>
> I cannot compile sh7752evb and sh7757lcr boards
> because of the following error:
>
> sh_eth.c: In function 'sh_eth_send':
> sh_eth.c:57:2: warning: implicit declaration of function 'dcache_wback_range' [-Wimplicit-function-declaration]
> drivers/net/built-in.o: In function `sh_eth_send':
> /home/masahiro/u-boot-log/u-boot-4/drivers/net/sh_eth.c:87: undefined reference to `dcache_wback_range'
> drivers/net/built-in.o: In function `sh_eth_rx_desc_init':
> /home/masahiro/u-boot-log/u-boot-4/drivers/net/sh_eth.c:276: undefined reference to `dcache_wback_range'
>
>
> I grepped the whole tree and the definition of "dcache_wback_range"
> function is surely missing.
>
> Unfortunately, no board maintainter is assigned for these two boards.
> Could you fix them?
> Or if you can't fix this issue, please both of the two boards.
>
>
Yes , I know. And I already send patches to net maintainer.
http://patchwork.ozlabs.org/patch/268947/
But these are not applied.
> And we have newly another warning message:
>
> time.c:14:2: warning: #warning "CONFIG_SYS_HZ must be 1000 and should not be defined by platforms" [-Wcpp]
> for rsk7203, rsk7264, rsk7269 boards.
>
> We need to fix boards which use CONFIG_SYS_HZ other than 1000.
>
Yes , I know too.
I am working about this.
>
> Best Regards
> Masahiro Yamada
>
Best regards,
Nobuhiro
More information about the U-Boot
mailing list