[U-Boot] [PATCH] pcm051: Support for revision 3

Tom Rini trini at ti.com
Tue Nov 19 21:08:27 CET 2013


On Tue, Nov 19, 2013 at 11:22:18AM +0100, Lars Poeschel wrote:

> From: Lars Poeschel <poeschel at lemonage.de>
> 
> Phytec sells revision or version 3 of pcm051. It is labeled 1358.3 on
> the board. The difference for u-boot is that is has other DDR3 RAM on it:
> 1 x MT41K256M16HA125E instead of 2 x MT41J256M8HX15E on revisions 1 and
> 2. Both configurations are 512 MiB.
> Configure your u-boot build with pcm051_rev3 for the new RAM and
> pcm051_rev1 for the old RAM configuration. Board revision 2 has to use
> pcm051_rev1 also.
> 
> Signed-off-by: Lars Poeschel <poeschel at lemonage.de>

Is there no run-time way to tell if we're on rev1/2/3?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131119/1e711fce/attachment.pgp>


More information about the U-Boot mailing list