[U-Boot] [PATCH v3 2/8] ahci: Fix cache align error messages

[Roger Quadros]

Align the ATA ID buffer to the cache-line boundary. This gets rid
of the below error mesages on ARM v7 platforms.

 scanning bus for devices...
 ERROR: v7_dcache_inval_range - start address is not aligned - 0xfee48618
 ERROR: v7_dcache_inval_range - stop address is not aligned - 0xfee48818

CC: Aneesh V <aneesh at ti.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 drivers/block/ahci.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index e24d634..e64df4f 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -623,7 +623,7 @@ static int ata_scsiop_inquiry(ccb *pccb)
 		95 - 4,
 	};
 	u8 fis[20];
-	u16 *tmpid;
+	ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
 	u8 port;
 
 	/* Clean ccb data buffer */
@@ -642,16 +642,10 @@ static int ata_scsiop_inquiry(ccb *pccb)
 
 	/* Read id from sata */
 	port = pccb->target;
-	tmpid = malloc(ATA_ID_WORDS * 2);
-	if (!tmpid) {
-		printf("%s: No memory for tmpid\n", __func__);
-		return -ENOMEM;
-	}
 
 	if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
 				ATA_ID_WORDS * 2, 0)) {
 		debug("scsi_ahci: SCSI inquiry command failure.\n");
-		free(tmpid);
 		return -EIO;
 	}
 
-- 
1.8.3.2