[U-Boot] [PATCH V2 2/7] arm: exynos: Add RPLL for Exynos5420

[Ajay Kumar]

RPLL is needed to drive the LCD panel on Exynos5420 based boards.

Signed-off-by: Ajay Kumar <ajaykumar.rs at samsung.com>
---
 arch/arm/cpu/armv7/exynos/clock_init.h         |  3 +++
 arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 13 +++++++++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/arm/cpu/armv7/exynos/clock_init.h b/arch/arm/cpu/armv7/exynos/clock_init.h
index a875d0b..fce502f 100644
--- a/arch/arm/cpu/armv7/exynos/clock_init.h
+++ b/arch/arm/cpu/armv7/exynos/clock_init.h
@@ -75,6 +75,9 @@ struct mem_timings {
 	unsigned spll_mdiv;
 	unsigned spll_pdiv;
 	unsigned spll_sdiv;
+	unsigned rpll_mdiv;
+	unsigned rpll_pdiv;
+	unsigned rpll_sdiv;
 	unsigned pclk_cdrex_ratio;
 	unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
 
diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
index e7f1496..c91c4a1 100644
--- a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
+++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
@@ -179,6 +179,10 @@ struct mem_timings mem_timings[] = {
 		.spll_mdiv = 0xc8,
 		.spll_pdiv = 0x3,
 		.spll_sdiv = 0x2,
+		/* RPLL @266MHz */
+		.rpll_mdiv = 0x10A,
+		.rpll_pdiv = 0x3,
+		.rpll_sdiv = 0x3,
 
 		.direct_cmd_msr = {
 			0x00020018, 0x00030000, 0x00010046, 0x00000d70,
@@ -800,6 +804,7 @@ static void exynos5420_system_clock_init(void)
 	writel(mem->ipll_pdiv * PLL_LOCK_FACTOR, &clk->ipll_lock);
 	writel(mem->spll_pdiv * PLL_LOCK_FACTOR, &clk->spll_lock);
 	writel(mem->kpll_pdiv * PLL_LOCK_FACTOR, &clk->kpll_lock);
+	writel(mem->rpll_pdiv * PLL_X_LOCK_FACTOR, &clk->rpll_lock);
 
 	setbits_le32(&clk->src_cpu, MUX_HPM_SEL_MASK);
 
@@ -898,6 +903,14 @@ static void exynos5420_system_clock_init(void)
 	while ((readl(&clk->spll_con0) & PLL_LOCKED) == 0)
 		;
 
+	/* Set RPLL */
+	writel(RPLL_CON2_VAL, &clk->rpll_con2);
+	writel(RPLL_CON1_VAL, &clk->rpll_con1);
+	val = set_pll(mem->rpll_mdiv, mem->rpll_pdiv, mem->rpll_sdiv);
+	writel(val, &clk->rpll_con0);
+	while ((readl(&clk->rpll_con0) & PLL_LOCKED) == 0)
+		;
+
 	writel(CLK_DIV_CDREX0_VAL, &clk->div_cdrex0);
 	writel(CLK_DIV_CDREX1_VAL, &clk->div_cdrex1);
 
-- 
1.7.12.4