[U-Boot] [PATCH v3 8/8] ARM: dra7_evm: Add SATA support

[Roger Quadros]

The evm has a SATA port. Enable SATA configuration and
inititialize the SATA controller.

Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 board/ti/dra7xx/evm.c        |  7 +++++++
 include/configs/dra7xx_evm.h | 11 +++++++++++
 2 files changed, 18 insertions(+)

diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 9657c75..9ae88c5 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -14,6 +14,7 @@
 #include <palmas.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sata.h>
 
 #include "mux_data.h"
 
@@ -77,6 +78,12 @@ int board_init(void)
 	return 0;
 }
 
+int board_late_init(void)
+{
+	omap_sata_init();
+	return 0;
+}
+
 /**
  * @brief misc_init_r - Configure EVM board specific configurations
  * such as power configurations, ethernet initialization as phase2 of
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index a9f39f2..6fadffb 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -78,4 +78,15 @@
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_OMAP_USB2PHY2_HOST
 
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
 #endif /* __CONFIG_DRA7XX_EVM_H */
-- 
1.8.3.2