[U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver

[Scott Wood]

On Thu, 2013-10-31 at 08:57 +0530, Prabhakar Kushwaha wrote:
> On 10/31/2013 7:37 AM, York Sun wrote:
> > Freescale IFC controller has been used for mpc8xxx. It will be used
> > for ARM-based SoC as well. This patch moves the driver to driver/mtd
> > and fix the header file includes.
> >
> > Signed-off-by: York Sun <yorksun at freescale.com>
> >
> Thanks York for this patch.  This was pending from long time.
> 
> This patch moves fsl_ifc.c from powerpc to driver/mtd
> I am not sure having 2 files for IFC controller in driver/mtd/ is 
> correct. Although fsl_ifc.c is for IFC Controller(NOR, NAND machine) and 
> fsl_ifc_nand.c is only for IFC - NAND machine.
> I am asking this question as same changes will be applicable in Linux also.
> 
> Also,
> We have to move changes of arch/powerpc/cpu/mpc85xx/speed.c to fsl_ifc.c 
> .  This will make a IFC driver generic.
> 
> As this patch has impact on all IFC platforms,  has this been tested on 
> few platforms?

I'm not sure that drivers/mtd is the right place for it as it doesn't
expose an mtd interface.

-Scott