[U-Boot] [[PATCH v3]pandaboard: 0/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM

[Hardik]

From: Hardik Patel <hardik.patel at volansystech.com>

OMAP4460 PandaBoard-ES till Rev B3 used Elpida EDB8064B2PB-xx-F RAM. However, starting Rev B3,
boards are now manufactured with Elpida EDB8164B3PF-xx-F DDR2 RAM.

---
Changes for v3:
   - Implemented strong emif_get_reg_dump function in panda.c to eliminate change in sdram_elpida.c
   - Extern emif_regs_* under sys_proto.h to be used by emif_get_reg_dump function in panda.c
   - Kernel doc style commenting
   - Run checkpatch to remove white spaces
Changes for v2:
   - Use pre-calculated timings for Elpida RAM instead of automatic
   - Added function to detect Pandaboard-ES Rev-B3 using GPIO 171 

Hardik Patel (1):
  Modification of Elpida RAM for Pandaboard-ES Rev-B3

 arch/arm/cpu/armv7/omap4/sdram_elpida.c     |    4 +-
 arch/arm/include/asm/arch-omap4/sys_proto.h |    4 ++
 board/ti/panda/panda.c                      |   60 +++++++++++++++++++++++++++
 3 files changed, 66 insertions(+), 2 deletions(-)

-- 
1.7.9.5