[U-Boot] [PATCH] trats: enable dfu and thor protocol for Tizen download

[Piotr Wilczek]

Hi Jaehoon,

> -----Original Message-----
> From: Jaehoon Chung [mailto:jh80.chung at samsung.com]
> Sent: Tuesday, November 12, 2013 10:23 AM
> To: Piotr Wilczek; u-boot at lists.denx.de
> Cc: Kyungmin Park
> Subject: Re: [U-Boot] [PATCH] trats: enable dfu and thor protocol for
> Tizen download
> 
> Hi Piotr,
> 
> I think good that used the "trats2:xxx" instead of "trats: xxx" at
> subject.
Yes, I overlook that, will fix.

> 
> On 11/12/2013 05:58 PM, Piotr Wilczek wrote:
> > Trats2 config is updated to support DFU mode.
> > Malloc pool must be increased for DFU buffer allocation.
> >
> > Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> > CC: Minkyu Kang <mk7.kang at samsung.com>
> > ---
> > This patch is based on
> > http://patchwork.ozlabs.org/patch/289378/
> >
> >  include/configs/trats2.h |   22 ++++++++++++++++++----
> >  1 file changed, 18 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/configs/trats2.h b/include/configs/trats2.h
> index
> > 66b1c95..52bb5e5 100644
> > --- a/include/configs/trats2.h
> > +++ b/include/configs/trats2.h
> > @@ -65,10 +65,9 @@
> >
> >  #define CONFIG_DISPLAY_CPUINFO
> >
> > -/*
> > - * Size of malloc() pool
> > - */
> > -#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (2 <<
20))
> > +#include <asm/sizes.h>
> > +/* Size of malloc() pool */
> > +#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 *
> SZ_1M))
> >
> >  /* select serial console configuration */  #define CONFIG_SERIAL2 @@
> > -100,6 +99,7 @@  #define CONFIG_CMD_CACHE  #define CONFIG_CMD_I2C
> > #define CONFIG_CMD_MMC
> > +#define CONFIG_CMD_DFU
> >  #define CONFIG_CMD_GPT
> >  #define CONFIG_CMD_PMIC
> >
> > @@ -115,12 +115,19 @@
> >
> >  /* USB Composite download gadget - g_dnl */  #define
> > CONFIG_USBDOWNLOAD_GADGET
> > +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
> >  #define CONFIG_DFU_FUNCTION
> >  #define CONFIG_DFU_MMC
> >
> > +/* TIZEN THOR downloader support */
> > +#define CONFIG_CMD_THOR_DOWNLOAD
> > +#define CONFIG_THOR_FUNCTION
> > +
> >  /* USB Samsung's IDs */
> >  #define CONFIG_G_DNL_VENDOR_NUM 0x04E8  #define
> > CONFIG_G_DNL_PRODUCT_NUM 0x6601
> > +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM #define
> > +CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
> >  #define CONFIG_G_DNL_MANUFACTURER "Samsung"
> >
> >  /* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
> > @@ -165,6 +172,12 @@
> >  	"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
> >  	"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
> >
> > +#define CONFIG_DFU_ALT \
> > +	"u-boot mmc 80 400;" \
> I recommend the "u-boot mmc 80 800"
Ok

> 
> Best Regards,
> Jaehoon Chung
> > +	"uImage ext4 0 2;" \
> > +	"exynos4412-trats2.dtb ext4 0 2;" \
> > +	""PARTS_ROOT" part 0 5\0"
> > +
> >  #define CONFIG_EXTRA_ENV_SETTINGS \
> >  	"bootk=" \
> >  		"run loaddtb; run loaduimage; bootm 0x40007FC0 -
> ${fdtaddr}\0" \ @@
> > -197,6 +210,7 @@
> >  	"mmcrootpart=5\0" \
> >  	"opts=always_resume=1\0" \
> >  	"partitions=" PARTS_DEFAULT \
> > +	"dfu_alt_info=" CONFIG_DFU_ALT \
> >  	"uartpath=ap\0" \
> >  	"usbpath=ap\0" \
> >  	"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
> >

Best regards,
Piotr Wilczek