[U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).

[Mårten Wikman]

Hello,


I'm bringing up a custom board that includes a mx283 and 64MB DDR2
memory, now I have some troubles with getting u-boot to properly boot
the kernel. I have enabled kernel_debugging and with earlyprintk I get
the following output:


## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   Linux-3.12.0-10554-g801a760
   Created:      2013-11-19  20:56:47 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3538288 Bytes = 3.4 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Kernel Image ... OK
   Loading Device Tree to 43b21000, end 43b291ca ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Error: unrecognized/unsupported processor variant (0x41069265).





After I looked the error message up on the internet I understand that
the machine-id u-boot is passing to the kernel is wrong. When I compare
arch_number from bdinfo on my custom board and my mx28-evk they are the
same and my mx28-evk boots the same kernel image without  roblems. Can
anybody give some advice how to solve this? 


Best regards,
Mårten Wikman