[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins
Stefano Babic
sbabic at denx.de
Tue Oct 1 16:49:43 CEST 2013
Hi Eric,
On 01/10/2013 16:26, Eric Nelson wrote:
> I'm not sure where you're seeing this in the RM, but in
> order to read the pad state when not configured as an input,
> the SION bit needs to be set in the pad mux register on i.MX51/53.
I have checked inside the "37.3.2.2 GPIO Write" for i.MX53 and "
35.4.2.1 Read Value from Pad" for i:MX51, I have not read anything about
SION. If someone has found where it is described, please mail !
>
> FWIW, this also works when not muxed as a GPIO, which is really
> handy for verifying that a PWM is toggling, et cetera.
Well, if you have directly tested it, it is better proofed as by the
manuals..then we need the same fix for i.MX51/i.MX53, too.
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list