October 2013 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Tue Oct 1 00:11:48 CEST 2013
Ending: Thu Oct 31 23:43:10 CET 2013
Messages: 2075

[U-Boot] u-boot and uefi Altunbas Sabri (DC-IA/EAH2)
No subject
No subject
No subject
No subject
No subject
No subject
No subject
No subject
No subject
No subject
No subject
No subject
[U-Boot] Dynamically define which Kernel image to boot during SPL execution 0xbin4ry
[U-Boot] Please pull u-boot-ti/master Albert ARIBAUD
[U-Boot] Pull request for u-boot-marvell.git Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-imx Albert ARIBAUD
[U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
[U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS Albert ARIBAUD
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Albert ARIBAUD
[U-Boot] [PATCH v2 1/3] arm/km: add support for km_kirkwood_128m16 board Albert ARIBAUD
[U-Boot] [ANN] v2013.10-rc4 Albert ARIBAUD
[U-Boot] [PATCH v5 7/8] ARM: extend non-secure switch to also go into HYP mode Albert ARIBAUD
[U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switch to non-secure state Albert ARIBAUD
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Albert ARIBAUD
[U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux Albert ARIBAUD
[U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel Albert ARIBAUD
[U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel Albert ARIBAUD
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Albert ARIBAUD
[U-Boot] [PATCH v5 7/8] ARM: extend non-secure switch to also go into HYP mode Albert ARIBAUD
[U-Boot] [PATCH v5 0/8] ARMv7: Add HYP mode switching support Albert ARIBAUD
[U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
[U-Boot] [U-Boot, u-boot, RFC, v1] sdp4430: Initialize board id using CONFIG_MACH_TYPE Albert ARIBAUD
[U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS Albert ARIBAUD
[U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS Albert ARIBAUD
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations Albert ARIBAUD
[U-Boot] [PATCH 0/4] arm64: rela relocation Albert ARIBAUD
[U-Boot] AES: Encryption of u-boot.img Albert ARIBAUD
[U-Boot] Please pull u-boot-ti/master Albert ARIBAUD
[U-Boot] [PATCH v4] omap1510inn: arm925t: remove support Albert ARIBAUD
[U-Boot] [RESEND PATCH v7 1/2] socfpga: Adding System Manager driver Albert ARIBAUD
[U-Boot] [RESEND PATCH v6 2/2] socfpga: Adding pin mux handoff files Albert ARIBAUD
[U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations Albert ARIBAUD
[U-Boot] [PATCH 0/4] arm64: rela relocation Albert ARIBAUD
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations Albert ARIBAUD
[U-Boot] Pull request: nand flash Albert ARIBAUD
[U-Boot] Pull request: nand flash Albert ARIBAUD
[U-Boot] Pull request: nand flash Albert ARIBAUD
[U-Boot] Pull request: nand flash Albert ARIBAUD
[U-Boot] Pull request: nand flash Albert ARIBAUD
[U-Boot] please pull u-boot-samsung master Albert ARIBAUD
[U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
[U-Boot] [RFC] [PATCH] [NEXT] arm: keep all sections in ELF file Albert ARIBAUD
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Albert ARIBAUD
[U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable Albert ARIBAUD
[U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state Albert ARIBAUD
[U-Boot] How/Where does "_start" get assigned a value ? Albert ARIBAUD
[U-Boot] [PATCH] arm: remove unneeded symbol offsets and _TEXT_BASE Albert ARIBAUD
[U-Boot] [PATCH v1] patman: add Series-commit-notes tag and section Albert ARIBAUD
[U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE Albert ARIBAUD
[U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE Albert ARIBAUD
[U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE Albert ARIBAUD
[U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state Albert ARIBAUD
[U-Boot] Handling hangs (was: [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE) Albert ARIBAUD
[U-Boot] Suggestion for building all boards Albert ARIBAUD
[U-Boot] Handling hangs (was: [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE) Albert ARIBAUD
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Albert ARIBAUD
[U-Boot] Handling hangs (was: [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE) Albert ARIBAUD
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Albert ARIBAUD
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Albert ARIBAUD
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Albert ARIBAUD
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Albert ARIBAUD
[U-Boot] [ANN] Release slightly delayed Albert ARIBAUD
[U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable Albert ARIBAUD
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Albert ARIBAUD
[U-Boot] u-boot-xlnx/master-next: build error Albert ARIBAUD
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Albert ARIBAUD
[U-Boot] fatls shows duplicated entries with long and short names Albert ARIBAUD
[U-Boot] [U-boot] "-mno-unaligned-access" question Albert ARIBAUD
[U-Boot] [PATCH v2] config.mk: disable -fstack-usage for blackfin and m68k Albert ARIBAUD
[U-Boot] [PATCH v3] config.mk: fix -fstack-usage support test Albert ARIBAUD
[U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE Albert ARIBAUD
[U-Boot] [PATCH v3] config.mk: fix -fstack-usage support test Albert ARIBAUD
[U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE Albert ARIBAUD
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Albert ARIBAUD
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Albert ARIBAUD
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Albert ARIBAUD
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Albert ARIBAUD
[U-Boot] [PATCH v8 0/2] I2C: Zynq Albert ARIBAUD
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Albert ARIBAUD
[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers. Albert ARIBAUD
[U-Boot] [PATCH 0/3] All M68K boards are broken Albert ARIBAUD
[U-Boot] [PATCH 0/3] All M68K boards are broken Albert ARIBAUD
[U-Boot] Is EP88x board dead or not? Albert ARIBAUD
[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers. Albert ARIBAUD
[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers. Albert ARIBAUD
[U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver Albert ARIBAUD
[U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver Albert ARIBAUD
[U-Boot] [ANN] U-Boot v2013.10 released Albert ARIBAUD
[U-Boot] [PATCH v2] arm: vf610: initial integration for colibri vf50 Albert ARIBAUD
[U-Boot] [PATCH v2 3/3] arm: rmobile: Add support lager board Albert ARIBAUD
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Albert ARIBAUD
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Albert ARIBAUD
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Albert ARIBAUD
[U-Boot] [PATCH v2] arm: Remove IXP425 boards pdnb3 and scpu Albert ARIBAUD
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Albert ARIBAUD
[U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH> Albert ARIBAUD
[U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function Albert ARIBAUD
[U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH> Albert ARIBAUD
[U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function Albert ARIBAUD
[U-Boot] fdt performance Albert ARIBAUD
[U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791 Albert ARIBAUD
[U-Boot] [PATCH v2 01/10] arm: vf610: fix anadig register struct Albert ARIBAUD
[U-Boot] [PATCH v2 01/10] arm: vf610: fix anadig register struct Albert ARIBAUD
[U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function Albert ARIBAUD
[U-Boot] [PATCH v2 04/10] arm: vf610: add anadig pll5 definitions Albert ARIBAUD
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Albert ARIBAUD
[U-Boot] Pull request: u-boot-sh/master Albert ARIBAUD
[U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791 Albert ARIBAUD
[U-Boot] Bootdelay -1 for none autoboot does not work Mario Albrecht
[U-Boot] Bootdelay -1 for none autoboot does not work Mario Albrecht
[U-Boot] Bootdelay -1 for none autoboot does not work Mario Albrecht
[U-Boot] Question about CONFIG_ENV_IS_IN_FAT Dmitriy Alekseev
[U-Boot] [PATCH 1/2] Introduced btrfs file-system with btrload command Adnan Ali
[U-Boot] [PATCH 2/2] Enable btrfs support in mx53loco config Adnan Ali
[U-Boot] [PATCH 1/2 v13] Introduced btrfs file-system with btrload command Adnan Ali
[U-Boot] [PATCH 2/2 v13] Enable btrfs support in mx53loco config Adnan Ali
[U-Boot] squashfs Naitik Amin
[U-Boot] [PATCH 0/6] SMDK5420: Add S2MPS11 pmic support to SMDK5420 Leela Krishna Amudala
[U-Boot] [PATCH 1/6] exynos: Use common pmic_reg_update() definition Leela Krishna Amudala
[U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus Leela Krishna Amudala
[U-Boot] [PATCH 3/6] FDT: Exynos5420: Add compatible srings for PMIC Leela Krishna Amudala
[U-Boot] [PATCH 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11 Leela Krishna Amudala
[U-Boot] [PATCH 5/6] exynos: Add a common DT based PMIC driver initialization Leela Krishna Amudala
[U-Boot] [PATCH 6/6] config: SMDK5420: Enable S2MPS1111111111111111111111 pmic Leela Krishna Amudala
[U-Boot] [PATCH 6/6] config: SMDK5420: Enable S2MPS1111111111111111111111 pmic Leela Krishna Amudala
[U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus Leela Krishna Amudala
[U-Boot] [PATCH V2 0/6] SMDK5420: Add S2MPS11 pmic support to SMDK5420 Leela Krishna Amudala
[U-Boot] [PATCH V2 1/6] exynos: Use common pmic_reg_update() definition Leela Krishna Amudala
[U-Boot] [PATCH V2 2/6] power: Explicitly select pmic device's bus Leela Krishna Amudala
[U-Boot] [PATCH V2 3/6] FDT: Exynos5420: Add compatible srings for PMIC Leela Krishna Amudala
[U-Boot] [PATCH V2 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11 Leela Krishna Amudala
[U-Boot] [PATCH V2 5/6] exynos: Add a common DT based PMIC driver initialization Leela Krishna Amudala
[U-Boot] [PATCH V2 6/6] config: SMDK5420: Enable S2MPS11 pmic Leela Krishna Amudala
[U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Pantelis Antoniou
[U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Pantelis Antoniou
[U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Pantelis Antoniou
[U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Pantelis Antoniou
[U-Boot] [PATCH 2/2 V2] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register Pantelis Antoniou
[U-Boot] Patch about mmc and sdhci, Please look it, i can not pull the patch. I copy it here. Pantelis Antoniou
[U-Boot] [PATCH 1/2] mmc: Fix calculation of capacity for hc cards Pantelis Antoniou
[U-Boot] [PATCH 2/2] mmc: Fix erase_grp_size for partitioned card Pantelis Antoniou
[U-Boot] [PATCH] mmc: dw_mmc: change the callback function name. Pantelis Antoniou
[U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Pantelis Antoniou
[U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC Pantelis Antoniou
[U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0 Pantelis Antoniou
[U-Boot] [PATCH 2/2 V2] Powerpc/esdhc: Add simple description of esdhc register Pantelis Antoniou
[U-Boot] [PATCH 1/2 V3] esdhc: memset mmc struct before putting into use Pantelis Antoniou
[U-Boot] [PATCH 2/2 V3] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register Pantelis Antoniou
[U-Boot] Pull request: u-boot-mmc 31102013 Pantelis Antoniou
[U-Boot] [PATCH] env: fix the env export varname Pierre Aubert
[U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro Stefano Babic
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Stefano Babic
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Stefano Babic
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Stefano Babic
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Stefano Babic
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Stefano Babic
[U-Boot] imximage on the MX50 Stefano Babic
[U-Boot] [PATCH] ARM: mx5: Enable L2 cache Stefano Babic
[U-Boot] [PATCH] ARM: mx5: Enable L2 cache Stefano Babic
[U-Boot] imximage on the MX50 Stefano Babic
[U-Boot] [PATCH] i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt Stefano Babic
[U-Boot] [PATCH] ARM: arch-mx6: fix PLL2_PFD2_FREQ Stefano Babic
[U-Boot] [PATCH v3] ARM: mxs: tools: Use mkimage for BootStream generation Stefano Babic
[U-Boot] [PATCH] udoo: Add initial support for mx6q udoo board Stefano Babic
[U-Boot] [PATCH] ARM: mxs: Add PPC-AG BG0900 board Stefano Babic
[U-Boot] [PATCH] ARM: mxs: Setup stack in JTAG mode Stefano Babic
[U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init Stefano Babic
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Stefano Babic
[U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init Stefano Babic
[U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting Stefano Babic
[U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework Stefano Babic
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Stefano Babic
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Stefano Babic
[U-Boot] [PATCH] video: ipu_disp: Fix clock polarity logic Stefano Babic
[U-Boot] SPL Dfu update Stefano Babic
[U-Boot] SPL Dfu update Stefano Babic
[U-Boot] [PATCH] ARM: mx5: Enable L2 cache Stefano Babic
[U-Boot] [PATCH] i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt Stefano Babic
[U-Boot] [PATCH] imx_watchdog: do not soft-reset while watchdog init Stefano Babic
[U-Boot] [PATCH] ARM: mx5: Enable L2 cache Stefano Babic
[U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro Stefano Babic
[U-Boot] [PATCH 1/4] mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin Stefano Babic
[U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot Stefano Babic
[U-Boot] [PATCH 2/2] ARM: mxs: Configure 2 Gbit DDR2 RAM for BG0900 Stefano Babic
[U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards Stefano Babic
[U-Boot] boards/p2041rdb: U-Boot 2013.10 SD Card Booting Issue Ryan Barnett
[U-Boot] boards/p2041rdb: U-Boot 2013.10 SD Card Booting Issue Ryan Barnett
[U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Ryan Barnett
[U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30 Alban Bedel
[U-Boot] [PATCH v2 0/2] ARM: tegra: Add the Tamonten-NG Evaluation carrier boards Alban Bedel
[U-Boot] [PATCH v2 1/2] ARM: tegra: support SKU b1 of Tegra30 Alban Bedel
[U-Boot] [PATCH v2 2/2] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board Alban Bedel
[U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board Alban Bedel
[U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board Alban Bedel
[U-Boot] [PATCH v1 1/5] bootcount: store bootcount var in environment Vaibhav Bedia
[U-Boot] Configuring U-Boot through device tree (was: Minutes from the U-Boot Mini Summit 2013) Dirk Behme
[U-Boot] [PATCH V2 0/2] add sdhci generic framework Vadim Bendebury
[U-Boot] [PATCH V2 0/2] add sdhci generic framework Vadim Bendebury
[U-Boot] [PATCH 1/2] Armada100: Adds SD/MMC Register definitions Ajay Bhargav
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Andreas Bießmann
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Andreas Bießmann
[U-Boot] [PATCH v1 2/3] arm, at91: add Siemens board taurus (based on AT91SAM9G20) Andreas Bießmann
[U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board Andreas Bießmann
[U-Boot] [RFC PATCH 0/3] at91: remove legacy gpio API Andreas Bießmann
[U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros Andreas Bießmann
[U-Boot] [RFC PATCH 2/3] at91sam9263ek: remove ATMEL_LEGACY Andreas Bießmann
[U-Boot] [RFC PATCH 3/3] at91: use generic gpio API for AT91_LED Andreas Bießmann
[U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board Andreas Bießmann
[U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros Andreas Bießmann
[U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot Andreas Bießmann
[U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot Andreas Bießmann
[U-Boot] [RFC PATCH 1/7] arm: atmel: sama5d3: early enable PIO peripherals Andreas Bießmann
[U-Boot] [RFC PATCH 2/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT Andreas Bießmann
[U-Boot] [RFC PATCH 5/7] arm: atmel: add plla and mck initialize function Andreas Bießmann
[U-Boot] [PATCH 0/6] at91: get rid of long standing work around CONFIG_AT91_LEGACY Andreas Bießmann
[U-Boot] [PATCH 1/6] video: remove AT91 legacy API from bus_vcxk Andreas Bießmann
[U-Boot] [PATCH 2/6] i2c: switch from AT91 legacy to ATMEL legacy Andreas Bießmann
[U-Boot] [PATCH 3/6] at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY Andreas Bießmann
[U-Boot] [PATCH 4/6] snapper9260: remove unused AT91_LEGACY Andreas Bießmann
[U-Boot] [PATCH 5/6] net: remove unused CONFIG_AT91_LEGACY Andreas Bießmann
[U-Boot] [PATCH 6/6] at91: remove all occourances of CONFIG_AT91_LEGACY Andreas Bießmann
[U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros Andreas Bießmann
[U-Boot] : SPI patches Rajeshwari Birje
[U-Boot] [PATCH 00/10 V4] EXYNOS5420: Add SMDK5420 board support Rajeshwari Birje
[U-Boot] [PATCH 0/4] spi: exynos: Improve performance Rajeshwari Birje
[U-Boot] [PATCH 0/4] spi: exynos: Improve performance Rajeshwari Birje
[U-Boot] [PATCH 0/4] spi: exynos: Improve performance Rajeshwari Birje
[U-Boot] [PATCH V3] exynos: spl: Add a custom spi copy function Rajeshwari Birje
[U-Boot] [PATCH 09/10 V4] SPL: EXYNOS: Prepare for variable size SPL support Rajeshwari Birje
[U-Boot] [PATCH 06/10 V4] Exynos5420: Add base patch for SMDK5420 Rajeshwari Birje
[U-Boot] [PATCH 10/10 V4] DWMMC: SMDK5420: Disable SMU for eMMC Rajeshwari Birje
[U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support Rajeshwari Birje
[U-Boot] Got u-boot-2012.10 running on at91sam9200 - but why does it work? Arvid Brodin
[U-Boot] How/Where does "_start" get assigned a value ? Arvid Brodin
[U-Boot] Got u-boot-2012.10 running on at91rm9200 - but why does it work? Arvid Brodin
[U-Boot] Pull request for u-boot-marvell.git Holger Brunck
[U-Boot] [PATCH] arm/km: fix i2c mux define for km_kirkwood_128m16 target Holger Brunck
[U-Boot] [ANN] v2013.10-rc4 Holger Brunck
[U-Boot] Pull request for u-boot-marvell.git Holger Brunck
[U-Boot] U-Boot Regression Testing Curt Brune
[U-Boot] U-Boot Regression Testing Curt Brune
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH v2 0/2] I2C: Zynq Michael Burr
[U-Boot] [PATCH v2 1/2] I2C: Zynq: Support for 0-length register address Michael Burr
[U-Boot] [PATCH v2 2/2] I2C:Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH v3 0/2] I2C: Zynq Michael Burr
[U-Boot] [PATCH v3 1/2] I2C: Zynq: Support for 0-length register address Michael Burr
[U-Boot] [PATCH v3 2/2] I2C: Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH v4 0/2] I2C: Zynq Michael Burr
[U-Boot] [PATCH v4 1/2] I2C: Zynq: Support for 0-length register address Michael Burr
[U-Boot] [PATCH v4 2/2] I2C: Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH v5 0/2] I2C: Zynq Michael Burr
[U-Boot] [PATCH v5 1/2] I2C: Zynq: Support for 0-length register address Michael Burr
[U-Boot] [PATCH v5 2/2] I2C:Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH v6 0/2] I2C: Zynq Michael Burr
[U-Boot] [PATCH v6 1/2] I2C: Zynq: Support for 0-length register address Michael Burr
[U-Boot] [PATCH v6 2/2] I2C:Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH v7 0/2] I2C: Zynq Michael Burr
[U-Boot] [PATCH v7 1/2] I2C: Zynq: Support for 0-length register address Michael Burr
[U-Boot] [PATCH v7 2/2] I2C: Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH v8 0/2] I2C: Zynq Michael Burr
[U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address Michael Burr
[U-Boot] [PATCH v8 2/2] I2C: Zynq: Adapt this driver to the new model Michael Burr
[U-Boot] [PATCH] mtd: fix warnings due to 64-bit partition support Paul Burton
[U-Boot] [PATCH 00/15] MIPS Malta board support Paul Burton
[U-Boot] [PATCH 01/15] mips32: detect L1 cache sizes if they're not defined Paul Burton
[U-Boot] [PATCH 02/15] pcnet: code style cleanup Paul Burton
[U-Boot] [PATCH 03/15] pcnet: s/le16_to_cpu/cpu_to_le16/ in pcnet_send Paul Burton
[U-Boot] [PATCH 04/15] pcnet: add cache flushing & invalidation Paul Burton
[U-Boot] [PATCH 05/15] pcnet: enable the NOUFLO feature Paul Burton
[U-Boot] [PATCH 06/15] pci.h: allow inclusion in assembly source Paul Burton
[U-Boot] [PATCH 07/15] qemu-malta: rename to just "malta" Paul Burton
[U-Boot] [PATCH 08/15] malta: setup super I/O UARTs Paul Burton
[U-Boot] [PATCH 09/15] malta: support for coreFPGA6 boards Paul Burton
[U-Boot] [PATCH 10/15] malta: display "U-boot" on the LCD screen Paul Burton
[U-Boot] [PATCH 11/15] malta: enable CONFIG_PCNET_79C973, PCNET_HAS_PROM, CONFIG_CMD_DHCP Paul Burton
[U-Boot] [PATCH 12/15] malta: remove cache size definitions Paul Burton
[U-Boot] [PATCH 13/15] malta: disable L2 caches Paul Burton
[U-Boot] [PATCH 14/15] malta: add script & instructions to flash U-boot Paul Burton
[U-Boot] [PATCH 15/15] malta: add myself to maintainers Paul Burton
[U-Boot] [PATCH] boards.cfg: remove trailing whitespace Paul Burton
[U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta" Paul Burton
[U-Boot] [PATCH v2 08/15] malta: setup super I/O UARTs Paul Burton
[U-Boot] [PATCH v2 09/15] malta: support for coreFPGA6 boards Paul Burton
[U-Boot] [PATCH v2 10/15] malta: display "U-boot" on the LCD screen Paul Burton
[U-Boot] [PATCH v2 13/15] malta: disable L2 caches Paul Burton
[U-Boot] [PATCH v2 14/15] malta: add script & instructions to flash U-boot Paul Burton
[U-Boot] [PATCH v2 15/15] malta: add myself to maintainers Paul Burton
[U-Boot] [PATCH 09/15] malta: support for coreFPGA6 boards Paul Burton
[U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta" Paul Burton
[U-Boot] [PATCH v3 07/15] qemu-malta: rename to just "malta" Paul Burton
[U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta" Paul Burton
[U-Boot] [PATCH] malta: define CONFIG_MEMSIZE_IN_BYTES Paul Burton
[U-Boot] [PATCH] malta: enable RTC support Paul Burton
[U-Boot] pxe incompatibility with x86 Ian Campbell
[U-Boot] pxe incompatibility with x86 Ian Campbell
[U-Boot] [PATCH] pxe: fix handling of absolute paths Ian Campbell
[U-Boot] [RESEND PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h Javier Martinez Canillas
[U-Boot] [RESEND PATCH v3 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h Javier Martinez Canillas
[U-Boot] [RESEND PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h Javier Martinez Canillas
[U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support Naveen Krishna Ch
[U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly Naveen Krishna Ch
[U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support Naveen Krishna Ch
[U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support Naveen Krishna Ch
[U-Boot] [PATCH] cmd_nvedit.c: Add env exists command James Chargin
[U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly Naveen Krishna Chatradhi
[U-Boot] [PATCH 2/3 v2] exynos: i2c: Change FDT bus setup code to enumerate ports correctly Naveen Krishna Chatradhi
[U-Boot] [PATCH 3/3 v2]: i2c: s3c24xx: add hsi2c controller support Naveen Krishna Chatradhi
[U-Boot] [PATCH 1/3 v3] exynos: i2c: Fix i2c driver to handle NACKs properly Naveen Krishna Chatradhi
[U-Boot] [PATCH 2/3 v3] exynos: i2c: Change FDT bus setup code to enumerate ports correctly Naveen Krishna Chatradhi
[U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support Naveen Krishna Chatradhi
[U-Boot] [PATCH 1/3 v4] exynos: i2c: Fix i2c driver to handle NACKs properly Naveen Krishna Chatradhi
[U-Boot] [PATCH 2/3 v4] exynos: i2c: Change FDT bus setup code to enumerate ports correctly Naveen Krishna Chatradhi
[U-Boot] [PATCH 3/3 v7] i2c: s3c24xx: add hsi2c controller support Naveen Krishna Chatradhi
[U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Jaehoon Chung
[U-Boot] [PATCH] mmc: dw_mmc: change the callback function name. Jaehoon Chung
[U-Boot] [PATCH 10/10 V4] DWMMC: SMDK5420: Disable SMU for eMMC Jaehoon Chung
[U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC Jaehoon Chung
[U-Boot] [PATCH] arm: trats: add the sd-card power control function. Jaehoon Chung
[U-Boot] Fat write problem Ruud Commandeur
[U-Boot] Replace Redboot with U-boot Romain Crausaz
[U-Boot] [PATCH v5 7/8] ARM: extend non-secure switch to also go into HYP mode Christoffer Dall
[U-Boot] Bootdelay -1 for none autoboot does not work Robert P. J. Day
[U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot." Robert P. J. Day
[U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot." Robert P. J. Day
[U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot." Robert P. J. Day
[U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot." Robert P. J. Day
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Robert P. J. Day
[U-Boot] Dual boot Images in Flash Wolfgang Denk
[U-Boot] Dual boot Images in Flash Wolfgang Denk
[U-Boot] [PPC] get_timer without CONFIG_INTERRUPTS Wolfgang Denk
[U-Boot] Dual boot Images in Flash Wolfgang Denk
[U-Boot] [PATCH 1/2] mx28evk: Use 512k for fdt partition to align it Wolfgang Denk
[U-Boot] Lots of SPDX-License Identifer have a trailing space Wolfgang Denk
[U-Boot] [PATCH 0/4] Coding Style cleanup Wolfgang Denk
[U-Boot] [PATCH 1/4] Coding Style cleanup: remove trailing white space Wolfgang Denk
[U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs Wolfgang Denk
[U-Boot] [PATCH 3/4] Coding Style cleanup: remove trailing empty lines Wolfgang Denk
[U-Boot] [PATCH 4/4] Coding Style cleanup: drop some excessive empty lines Wolfgang Denk
[U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x' Wolfgang Denk
[U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x' Wolfgang Denk
[U-Boot] [PATCH] Fix number base handling of "load" command Wolfgang Denk
[U-Boot] fs/fs.c - error handling needed? Wolfgang Denk
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Wolfgang Denk
[U-Boot] [PATCH 02/11] env_mmc.c: Make the non-redundant env_relocate_spec use malloc not stack Wolfgang Denk
[U-Boot] [PATCH 01/11] fw_env.c: Increase max dev path to 32 Wolfgang Denk
[U-Boot] Hi, I am new to U-Boot, how do I get started? Wolfgang Denk
[U-Boot] Dynamically define which Kernel image to boot during SPL execution Wolfgang Denk
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Wolfgang Denk
[U-Boot] [PATCH 02/11] env_mmc.c: Make the non-redundant env_relocate_spec use malloc not stack Wolfgang Denk
[U-Boot] [PATCH 01/11] fw_env.c: Increase max dev path to 32 Wolfgang Denk
[U-Boot] [PATCH 1/4] Coding Style cleanup: remove trailing white space Wolfgang Denk
[U-Boot] [PATCH 1/4 V2] Coding Style cleanup: remove trailing white space Wolfgang Denk
[U-Boot] fs/fs.c - error handling needed? Wolfgang Denk
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Wolfgang Denk
[U-Boot] [PATCH] Fix number base handling of "load" command Wolfgang Denk
[U-Boot] [PATCH V2] Fix number base handling of "load" command Wolfgang Denk
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Wolfgang Denk
[U-Boot] [PATCH] SPDX: document dual license notation Wolfgang Denk
[U-Boot] [PATCH] SPDX: document dual license notation Wolfgang Denk
[U-Boot] SPDX License IDs - moving forward Wolfgang Denk
[U-Boot] U-Boot Regression Testing Wolfgang Denk
[U-Boot] [PATCH 3/3] sf: using the same license header format Wolfgang Denk
[U-Boot] SPDX-License-Identifier on new files Wolfgang Denk
[U-Boot] [Patch v1 1/1] jffs2: change U_BOOT_CMD ls to fsls Wolfgang Denk
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Wolfgang Denk
[U-Boot] [ANN] U-Boot v2013.10 released Wolfgang Denk
[U-Boot] fdt performance Wolfgang Denk
[U-Boot] fdt performance Wolfgang Denk
[U-Boot] Can a standalone application send data via Ethernet in U-Boot? Wolfgang Denk
[U-Boot] Is EP88x board dead or not? Wolfgang Denk
[U-Boot] Question about CONFIG_ENV_IS_IN_FAT Wolfgang Denk
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Wolfgang Denk
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Wolfgang Denk
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Wolfgang Denk
[U-Boot] fdt performance Wolfgang Denk
[U-Boot] v2013.10 failed build with jffs2 cmd Wolfgang Denk
[U-Boot] fdt performance Wolfgang Denk
[U-Boot] Can a standalone application send data via Ethernet in U-Boot? Wolfgang Denk
[U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file Wolfgang Denk
[U-Boot] [PATCH v3 0/5] env: Add support for environment files Wolfgang Denk
[U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error Wolfgang Denk
[U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error Wolfgang Denk
[U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error Wolfgang Denk
[U-Boot] Illegal use of FP ops in clock_ti814x.c Wolfgang Denk
[U-Boot] [PATCH] powerpc/T1040EMU: Add T1040 emulator support Wolfgang Denk
[U-Boot] [U-boot] getstr() function? Wolfgang Denk
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Wolfgang Denk
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Wolfgang Denk
[U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere Wolfgang Denk
[U-Boot] Configuring U-Boot through device tree (was: Minutes from the U-Boot Mini Summit 2013) Wolfgang Denk
[U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file Wolfgang Denk
[U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file Wolfgang Denk
[U-Boot] Illegal use of FP ops in clock_ti814x.c Wolfgang Denk
[U-Boot] Illegal use of FP ops in clock_ti814x.c Wolfgang Denk
[U-Boot] fw_setenv device not accessible Wolfgang Denk
[U-Boot] [PATCH] Add support for SX151x SPI GPIO Expanders Wolfgang Denk
[U-Boot] SPL Dfu update Wolfgang Denk
[U-Boot] SPL Dfu update Wolfgang Denk
[U-Boot] SPL Dfu update Wolfgang Denk
[U-Boot] SPL Dfu update Wolfgang Denk
[U-Boot] [PATCH] nand_util.c: Correct licensing Wolfgang Denk
[U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards Wolfgang Denk
[U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution Wolfgang Denk
[U-Boot] Difference between CONFIG_SYS_TEXT_BASE and _start Djoker
[U-Boot] How/Where does "_start" get assigned a value ? Djoker
[U-Boot] How/Where does "_start" get assigned a value ? Djoker
[U-Boot] u-boot-xlnx/master-next: build error Oleg Dzhimiev
[U-Boot] u-boot-xlnx/master-next: build error Oleg Dzhimiev
[U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed Oleg Dzhimiev
[U-Boot] [Patch v3] cmd/gpt: Support gpt command for all devices Egbert Eich
[U-Boot] [PATCH] config: Define HAVE_BLOCK_DEVICE when CONFIG_CMD_GPT is set Egbert Eich
[U-Boot] [PATCH] config/sandbox: Add EFI and GPT support Egbert Eich
[U-Boot] [Patch v3] cmd/gpt: Support gpt command for all devices Egbert Eich
[U-Boot] [PATCH] Fix: nommu I2C adapter relocation error Jens Scharsig (BuS Elektronik)
[U-Boot] [PATCH] ARM: ATMEL: eb_cpux9k2: fix TEXT_BASE for ramboot target Jens Scharsig (BuS Elektronik)
[U-Boot] [PATCH] config: Add a default CONFIG_SYS_PROMPT Fabio Estevam
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Fabio Estevam
[U-Boot] [PATCH] ARM: mx5: Enable L2 cache Fabio Estevam
[U-Boot] Prevent null pointer dereference originating in cmd_pxe.c Fabio Estevam
[U-Boot] problems porting to 2013.x Fabio Estevam
[U-Boot] [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations Fabio Estevam
[U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config Fabio Estevam
[U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot Fabio Estevam
[U-Boot] [PATCH] video: ipu_disp: Fix clock polarity logic Fabio Estevam
[U-Boot] [PATCH] ARM: mx5: Enable L2 cache Fabio Estevam
[U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards Fabio Estevam
[U-Boot] Prevent null pointer dereference originating in cmd_pxe.c Steven Falco
[U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t FengHua
[U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t FengHua
[U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t FengHua
[U-Boot] [PATCH 0/4] arm64: rela relocation FengHua
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations FengHua
[U-Boot] [PATCH 3/4] arm64: Non-manual relocation FengHua
[U-Boot] [PATCH 0/4] arm64: rela relocation FengHua
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations FengHua
[U-Boot] help on adding bootelf to u-boot Robin Fernandes
[U-Boot] [RFC] i2c_reloc_fixup fails on m68k Mike Frysinger
[U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver Matthias Fuchs
[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers. Martin Fuzzey
[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers. Martin Fuzzey
[U-Boot] uboot panic in get_ticks Simon Glass
[U-Boot] [PATCH] RFC: Adjustments to dumpimage for Guilherme Simon Glass
[U-Boot] Buildman changes for release Simon Glass
[U-Boot] U-Boot DM2 status Simon Glass
[U-Boot] [PATCH 0/8] Secure boot improvements and test on Beaglebone Black Simon Glass
[U-Boot] [PATCH 1/8] am33xx/omap: Allow cache enable for all Sitara/OMAP Simon Glass
[U-Boot] [PATCH 2/8] hash: Export functions to find and show hash Simon Glass
[U-Boot] [PATCH 3/8] fdt: Add DEV_TREE_BIN option to specify a device tree binary file Simon Glass
[U-Boot] [PATCH 4/8] fdt: Update functions which write to an FDT to return -ENOSPC Simon Glass
[U-Boot] [PATCH 5/8] arm: ti: Increase malloc size to 16MB for armv7 boards Simon Glass
[U-Boot] [PATCH 6/8] RFC: am33xx/omap: Enable CONFIG_OF_CONTROL Simon Glass
[U-Boot] [PATCH 7/8] RFC: am33xx/omap: Enable FIT support Simon Glass
[U-Boot] [PATCH 8/8] RFC: am33xx/omap: Enable secure boot with CONFIG_FIT_SIGNATURE Simon Glass
[U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux Simon Glass
[U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel Simon Glass
[U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile Simon Glass
[U-Boot] [PATCH v2 17/19] sandbox: convert makefiles to Kbuild style Simon Glass
[U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS Simon Glass
[U-Boot] [PATCH v3 0/6] Second step towards Kbuild: Descend down like Kbuild Simon Glass
[U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile Simon Glass
[U-Boot] [PATCH v3 0/6] Second step towards Kbuild: Descend down like Kbuild Simon Glass
[U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver Simon Glass
[U-Boot] fs/fs.c - error handling needed? Simon Glass
[U-Boot] [PATCH 0/5] ARM: Exynos5250: consolidate configuration files Simon Glass
[U-Boot] [PATCH 01/10 V4] EXYNOS5: Create a common board file Simon Glass
[U-Boot] [PATCH 02/10 V4] Exynos5420: Add base addresses for 5420 Simon Glass
[U-Boot] [PATCH 05/10 V4] Exynos5420: Add support for 5420 in pinmux and gpio Simon Glass
[U-Boot] [PATCH 06/10 V4] Exynos5420: Add base patch for SMDK5420 Simon Glass
[U-Boot] [PATCH 07/10 V4] DTS: Add dts support for SMDK5420 Simon Glass
[U-Boot] [PATCH 08/10 V4] Config: Add initial config for SMDK5420 Simon Glass
[U-Boot] [PATCH 09/10 V4] SPL: EXYNOS: Prepare for variable size SPL support Simon Glass
[U-Boot] [PATCH 10/10 V4] DWMMC: SMDK5420: Disable SMU for eMMC Simon Glass
[U-Boot] [PATCH V2 1/6] exynos: Use common pmic_reg_update() definition Simon Glass
[U-Boot] [PATCH V2 2/6] power: Explicitly select pmic device's bus Simon Glass
[U-Boot] [PATCH V2 3/6] FDT: Exynos5420: Add compatible srings for PMIC Simon Glass
[U-Boot] [PATCH V2 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11 Simon Glass
[U-Boot] [PATCH V2 5/6] exynos: Add a common DT based PMIC driver initialization Simon Glass
[U-Boot] [PATCH V2 6/6] config: SMDK5420: Enable S2MPS11 pmic Simon Glass
[U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs Simon Glass
[U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail Simon Glass
[U-Boot] [PATCH 2/2] buildman: make board selector argument a regex Simon Glass
[U-Boot] [PATCH 01/10 V5] EXYNOS5: Create a common board file Simon Glass
[U-Boot] [PATCH 06/10 V5] Exynos5420: Add base patch for SMDK5420 Simon Glass
[U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail Simon Glass
[U-Boot] U-Boot Regression Testing Simon Glass
[U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail Simon Glass
[U-Boot] [PATCH V2] buildman: make board selector argument a regex Simon Glass
[U-Boot] Please pull u-boot-x86 buildman Simon Glass
[U-Boot] Suggestion for building all boards Simon Glass
[U-Boot] [PATCH 2/6] arm: exynos: Add RPLL for Exynos5420 Simon Glass
[U-Boot] [PATCH 3/6] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420 Simon Glass
[U-Boot] [PATCH 4/6] video: exynos_fimd: Add framework to disable FIMD sysmmu Simon Glass
[U-Boot] [PATCH 5/6] smdk5420: Implement callbacks needed by exynos_fb driver Simon Glass
[U-Boot] [PATCH 6/6] CONFIG: SMDK5420: Enable FIMD and DP Simon Glass
[U-Boot] [PATCH 1/6] exynos_fb: Remove usage of static defines Simon Glass
[U-Boot] Beaglebone LCD support in U-Boot? Simon Glass
[U-Boot] fdt performance Simon Glass
[U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles Simon Glass
[U-Boot] [PATCH v4 3/6] fs: move some file system to fs/Makefile Simon Glass
[U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles Simon Glass
[U-Boot] [PATCH v3 07/16] dm: Add base driver model support Simon Glass
[U-Boot] [PATCH v3 08/16] dm: Set up driver model after relocation Simon Glass
[U-Boot] [PATCH v3 10/16] dm: Add a 'dm' command for testing Simon Glass
[U-Boot] [PATCH v3 15/16] dm: Add README for driver model Simon Glass
[U-Boot] [PATCH v3 11/16] dm: Add a demonstration/example driver Simon Glass
[U-Boot] [PATCH v3 12/16] dm: Add GPIO support and tests Simon Glass
[U-Boot] [PATCH v4 3/6] fs: move some file system to fs/Makefile Simon Glass
[U-Boot] [PATCH v4 0/16] Driver model implementation, tests, demo and GPIO Simon Glass
[U-Boot] [PATCH v4 01/16] sandbox: Make map_to_sysmem() use a constant pointer Simon Glass
[U-Boot] [PATCH v4 02/16] sandbox: Correct data sizes and printf() strings in fdtdec.c Simon Glass
[U-Boot] [PATCH v4 03/16] sandbox: config: Don't use 64-bit physical memory Simon Glass
[U-Boot] [PATCH v4 04/16] sandbox: Build a device tree file for sandbox Simon Glass
[U-Boot] [PATCH v4 05/16] Add cmd_process_error() to report and process errors Simon Glass
[U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model Simon Glass
[U-Boot] [PATCH v4 07/16] dm: Add README for driver model Simon Glass
[U-Boot] [PATCH v4 08/16] dm: Add base driver model support Simon Glass
[U-Boot] [PATCH v4 09/16] dm: Set up driver model after relocation Simon Glass
[U-Boot] [PATCH v4 10/16] dm: Add basic tests Simon Glass
[U-Boot] [PATCH v4 11/16] dm: Add a 'dm' command for testing Simon Glass
[U-Boot] [PATCH v4 12/16] dm: Add a demonstration/example driver Simon Glass
[U-Boot] [PATCH v4 13/16] dm: Add GPIO support and tests Simon Glass
[U-Boot] [PATCH v4 14/16] sandbox: Convert GPIOs to use driver model Simon Glass
[U-Boot] [PATCH v4 15/16] dm: Enable gpio command to support driver model Simon Glass
[U-Boot] [PATCH v4 16/16] dm: Move old driver model documentation into an 'old-docs' directory Simon Glass
[U-Boot] [PATCH v4 03/16] sandbox: config: Don't use 64-bit physical memory Simon Glass
[U-Boot] [PATCH v4 04/16] sandbox: Build a device tree file for sandbox Simon Glass
[U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model Simon Glass
[U-Boot] [PATCH v4 16/16] dm: Move old driver model documentation into an 'old-docs' directory Simon Glass
[U-Boot] Beaglebone LCD support in U-Boot? Simon Glass
[U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model Simon Glass
[U-Boot] [PATCH v2 3/5] Allow U-Boot scripts to be placed in a .env file Simon Glass
[U-Boot] [PATCH v2 4/5] env: Allow environment files to use the C preprocessor Simon Glass
[U-Boot] [PATCH v2 5/5] RFC: tegra: Convert to using environment files Simon Glass
[U-Boot] [PATCH v5 0/16] Driver model implementation, tests, demo and GPIO Simon Glass
[U-Boot] [PATCH v5 01/16] sandbox: Make map_to_sysmem() use a constant pointer Simon Glass
[U-Boot] [PATCH v5 02/16] sandbox: Correct data sizes and printf() strings in fdtdec.c Simon Glass
[U-Boot] [PATCH v5 03/16] sandbox: config: Don't use 64-bit physical memory Simon Glass
[U-Boot] [PATCH v5 04/16] sandbox: Build a device tree file for sandbox Simon Glass
[U-Boot] [PATCH v5 05/16] Add cmd_process_error() to report and process errors Simon Glass
[U-Boot] [PATCH v5 06/16] dm: Add README for driver model Simon Glass
[U-Boot] [PATCH v5 07/16] dm: Add base driver model support Simon Glass
[U-Boot] [PATCH v5 08/16] sandbox: config: Enable driver model Simon Glass
[U-Boot] [PATCH v5 09/16] dm: Set up driver model after relocation Simon Glass
[U-Boot] [PATCH v5 10/16] dm: Add basic tests Simon Glass
[U-Boot] [PATCH v5 11/16] dm: Add a 'dm' command for testing Simon Glass
[U-Boot] [PATCH v5 12/16] dm: Add a demonstration/example driver Simon Glass
[U-Boot] [PATCH v5 13/16] dm: Add GPIO support and tests Simon Glass
[U-Boot] [PATCH v5 14/16] sandbox: Convert GPIOs to use driver model Simon Glass
[U-Boot] [PATCH v5 15/16] dm: Enable gpio command to support driver model Simon Glass
[U-Boot] [PATCH v5 16/16] dm: Remove old driver model documentation Simon Glass
[U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile Simon Glass
[U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles Simon Glass
[U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C Simon Glass
[U-Boot] Fwd: [PATCH 1/6] exynos_fb: Remove usage of static defines Simon Glass
[U-Boot] Changing CONFIG_SYS_PROMPT on the fly Simon Glass
[U-Boot] [PATCH v3 0/5] env: Add support for environment files Simon Glass
[U-Boot] [PATCH v3 1/5] sandbox: Support 'env import' and 'env export' Simon Glass
[U-Boot] [PATCH v3 2/5] Make 'run' use run_command_list() instead of run_command() Simon Glass
[U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file Simon Glass
[U-Boot] [PATCH v3 4/5] env: Allow environment files to use the C preprocessor Simon Glass
[U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files Simon Glass
[U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere Simon Glass
[U-Boot] [PATCH v4 1/8] Implement autoconf header file Simon Glass
[U-Boot] [PATCH v4 2/8] main: Use autoconf for boot retry feature Simon Glass
[U-Boot] [PATCH v4 3/8] main: Remove CONFIG #ifdefs from the abortboot() code Simon Glass
[U-Boot] [PATCH v4 4/8] main: Use autoconf to remove #ifdefs around process_boot_delay() Simon Glass
[U-Boot] [PATCH v4 5/8] main: Use autoconf for boot_delay code Simon Glass
[U-Boot] [PATCH v4 6/8] main: Use autoconf for parser selection Simon Glass
[U-Boot] [PATCH v4 7/8] main: Use autoconf in command line reading Simon Glass
[U-Boot] [PATCH v4 8/8] main: Use autoconf in main_loop() Simon Glass
[U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file Simon Glass
[U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file Simon Glass
[U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere Simon Glass
[U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files Simon Glass
[U-Boot] Question about patman Simon Glass
[U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files Simon Glass
[U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files Simon Glass
[U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file Simon Glass
[U-Boot] [PATCH v3 0/5] env: Add support for environment files Simon Glass
[U-Boot] Does uboot support HID-I2C David Goodenough
[U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards Igor Grinberg
[U-Boot] [PATCH 1/3] spi: omap3: add support for more word lengths Igor Grinberg
[U-Boot] [PATCH 2/3] lcd: add DataImage SCF0403x LCD panel support Igor Grinberg
[U-Boot] [PATCH 3/3] cm_t35: use scf0403 driver Igor Grinberg
[U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards Igor Grinberg
[U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework Igor Grinberg
[U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework Igor Grinberg
[U-Boot] [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations Shawn Guo
[U-Boot] Dual boot Images in Flash Gupta, Pekon
[U-Boot] Dual boot Images in Flash Gupta, Pekon
[U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width Gupta, Pekon
[U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width Gupta, Pekon
[U-Boot] [PATCH v7 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver Gupta, Pekon
[U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Gupta, Pekon
[U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Gupta, Pekon
[U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Gupta, Pekon
[U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver Pekon Gupta
[U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Pekon Gupta
[U-Boot] [PATCH v8 2/5] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes Pekon Gupta
[U-Boot] [PATCH v8 3/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes Pekon Gupta
[U-Boot] [PATCH v8 4/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes Pekon Gupta
[U-Boot] [PATCH v8 5/5] board/ti/am335x/README: update for NAND boot Pekon Gupta
[U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Gupta, Pekon
[U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Gupta, Pekon
[U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Gupta, Pekon
[U-Boot] [PATCH 2/3] lcd: add DataImage SCF0403x LCD panel support Anatolij Gustschin
[U-Boot] [PATCH 3/3] cm_t35: use scf0403 driver Anatolij Gustschin
[U-Boot] [PATCH V2 4/6] lcd: add DataImage SCF0403x LCD panel support Anatolij Gustschin
[U-Boot] [PATCH V2 5/6] omap3_dss: define DSS_ONOFF Anatolij Gustschin
[U-Boot] [PATCH] video: ipu_disp: Fix clock polarity logic Anatolij Gustschin
[U-Boot] [PATCH] video, cfb_console: make background and foreground color configurable Anatolij Gustschin
[U-Boot] [PATCH] video, formike: change tag/val write Anatolij Gustschin
[U-Boot] Pull request: u-boot-video/master Anatolij Gustschin
[U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting Zhang Haijun
[U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting Zhang Haijun
[U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Zhang Haijun
[U-Boot] [PATCH] powerpc/esdhc: Map register for eSDHC host controller 3.0 Zhang Haijun
[U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit Zhang Haijun
[U-Boot] [PATCH 2/2 V3] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register Zhang Haijun
[U-Boot] [[PATCH]pandaboard: 0/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3 Hardik
[U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3 Hardik
[U-Boot] u-boot and Linux hanle ubifs ecc in different way on beaglebon variant board Tim Harvey
[U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field Andre Heider
[U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes Andre Heider
[U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field Andre Heider
[U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes Andre Heider
[U-Boot] [PATCH v2 2/2] video: bcm2835: respect the pitch value Andre Heider
[U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes Andre Heider
[U-Boot] [PATCH v2] mxc_spi: bugfix for double incrementing read pointer on unaligned buffers in spi_xchg_single Timo Herbrecher
[U-Boot] [PATCH v2] mxc_spi: bugfix for double incrementing read pointer on unaligned buffers in spi_xchg_single Timo Herbrecher
[U-Boot] [PATCH] config: Add a default CONFIG_SYS_PROMPT Rob Herring
[U-Boot] [PATCH v13 1/6] core support of arm64 Rob Herring
[U-Boot] [PATCH v13 1/6] core support of arm64 Rob Herring
[U-Boot] [PATCH v13 6/6] add weak entry definition Rob Herring
[U-Boot] [PATCH v3 0/3] Consolidate CONFIG_SYS_HZ definition Rob Herring
[U-Boot] [PATCH v3 1/3] config: consolidate CONFIG_SYS_HZ definition Rob Herring
[U-Boot] [PATCH v3 2/3] config: remove platform CONFIG_SYS_HZ definition part 1/2 Rob Herring
[U-Boot] [PATCH v3 3/3] config: remove platform CONFIG_SYS_HZ definition part 2/2 Rob Herring
[U-Boot] [PATCH v2 0/9] Consolidate timer code Rob Herring
[U-Boot] [PATCH v2 1/9] examples: enable gc-sections option Rob Herring
[U-Boot] [PATCH v2 2/9] Introduce common timer functions Rob Herring
[U-Boot] [PATCH v2 3/9] sh: convert to common timer code Rob Herring
[U-Boot] [PATCH v2 4/9] ARM: highbank: convert to common timer code Rob Herring
[U-Boot] [PATCH v2 5/9] ARM: mx25: convert to common timer code Rob Herring
[U-Boot] [PATCH v2 6/9] ARM: vexpress: convert to common timer code Rob Herring
[U-Boot] [PATCH v2 7/9] ARM: socfpga: convert to common timer code Rob Herring
[U-Boot] [PATCH v2 8/9] ARM: tegra: convert to common timer code Rob Herring
[U-Boot] [PATCH v2 9/9] ARM: versatile: convert to common timer code Rob Herring
[U-Boot] [PATCH] pxe: fix handling of absolute paths Rob Herring
[U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards Rob Herring
[U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver Joe Hershberger
[U-Boot] [PATCH v1 1/1] netconsole loses 2nd character of input Joe Hershberger
[U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired Jeroen Hofstee
[U-Boot] [PATCH] drivers/net/e1000: Introduce CONFIG_E1000_NO_NVM Rojhalat Ibrahim
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Edgar E. Iglesias
[U-Boot] [PATCH v4] spi: Add support SH Quad SPI driver Nobuhiro Iwamatsu
[U-Boot] [PATCH] spi: Add support SH Quad SPI driver Nobuhiro Iwamatsu
[U-Boot] [PATCH 1/2] README: I2C: Fix indent Nobuhiro Iwamatsu
[U-Boot] [PATCH 2/2] i2c: sh_i2c: Avoid using I2C prior to relocation Nobuhiro Iwamatsu
[U-Boot] Pull request: u-boot-sh/master Nobuhiro Iwamatsu
[U-Boot] [PATCH 1/3] i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework Nobuhiro Iwamatsu
[U-Boot] [PATCH 2/3] arm: kzm9g: Update to new I2C framework Nobuhiro Iwamatsu
[U-Boot] [PATCH 3/3] sh: ecovec: Update to new I2C framework Nobuhiro Iwamatsu
[U-Boot] Pull request: u-boot-sh/master Nobuhiro Iwamatsu
[U-Boot] [PATCH 2/3] arm: kzm9g: Update to new I2C framework Nobuhiro Iwamatsu
[U-Boot] [PATCH 3/3] sh: ecovec: Update to new I2C framework Nobuhiro Iwamatsu
[U-Boot] [PATCH v2] i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework Nobuhiro Iwamatsu
[U-Boot] [PATCH v3 1/2] arm: rmobile: Add support r8a7790 Nobuhiro Iwamatsu
[U-Boot] [PATCH v3 2/2] arm: rmobile: Add support lager board Nobuhiro Iwamatsu
[U-Boot] [PATCH v2 1/2] arm: rmobile: Add support R8A7791 Nobuhiro Iwamatsu
[U-Boot] [PATCH v2 2/2] arm: rmobile: Add support koelsch board Nobuhiro Iwamatsu
[U-Boot] [PATCH v2 3/3] arm: rmobile: Add support lager board Nobuhiro Iwamatsu
[U-Boot] Should be Acked-by and Reviewed-by inherited for updated patches? Nobuhiro Iwamatsu
[U-Boot] Minutes from the U-Boot Mini Summit 2013 Nobuhiro Iwamatsu
[U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791 Nobuhiro Iwamatsu
[U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791 Nobuhiro Iwamatsu
[U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width Mark Jackson
[U-Boot] [PATCH 0/2] powerpc/t104xrdb: Add support for T1040RDB and T1042RDB_PI Priyanka Jain
[U-Boot] [PATCH 1/2] powerpc/t104xrdb: Add T1040RDB board support Priyanka Jain
[U-Boot] [PATCH 2/2] powerpc/t104xrdb: Add T1042RDB_PI board support Priyanka Jain
[U-Boot] [PATCH] powerpc/t1040: Update defines to support T1040SoC personalities Priyanka Jain
[U-Boot] [PATCH][v2] powerpc/t1040: Update defines to support T1040SoC personalities Priyanka Jain
[U-Boot] [PATCH 0/2][v2] powerpc/t104xrdb: Add support for T1040RDB and T1042RDB_PI Priyanka Jain
[U-Boot] [PATCH 1/2][v2] powerpc/t104xrdb: Add T1040RDB board support Priyanka Jain
[U-Boot] [PATCH 2/2][v2] powerpc/t104xrdb: Add T1042RDB_PI board support Priyanka Jain
[U-Boot] [PATCH] powerpc/t1040qds: Add DDR Raw Timing support Priyanka Jain
[U-Boot] [PATCH] powerpc/t1040qds: Correct Maintainer name in boards.cfg Priyanka Jain
[U-Boot] [PATCH] powerpc/T1040EMU: Add T1040 emulator support Priyanka Jain
[U-Boot] [PATCH][v2] powerpc/T1040EMU: Add T1040 emulator support Priyanka Jain
[U-Boot] [PATCH 1/2] powerpc: spiflash:Add corenet devices support in eSPI SPL Priyanka Jain
[U-Boot] [PATCH 2/2] T1040QDS: Add support of 2 stage SPI bootloader Priyanka Jain
[U-Boot] [PATCH 1/2] powerpc: mmc: Add corenet devices support in esdhc spl Priyanka Jain
[U-Boot] [PATCH 2/2] T1040QDS: Add support of 2 stage SD bootloader Priyanka Jain
[U-Boot] [PATCH V2]Powerpc/P1022DS: Enable the DIU for P1022DS board. Jason Jin
[U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta" Gabor Juhos
[U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta" Gabor Juhos
[U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta" Gabor Juhos
[U-Boot] [PATCH v2 09/15] malta: support for coreFPGA6 boards Gabor Juhos
[U-Boot] [PATCH] malta: define CONFIG_MEMSIZE_IN_BYTES Gabor Juhos
[U-Boot] please pull u-boot-samsung master Minkyu Kang
[U-Boot] [PATCH v2 2/2] serial: s5p: Staticize local functions Minkyu Kang
[U-Boot] MPC8641D stucks before relocation Ashish Khetan
[U-Boot] MPC8641D stucks before relocation Ashish Khetan
[U-Boot] MPC8641D stucks before relocation Ashish Khetan
[U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
[U-Boot] [PATCH 1/3] cm_t35: reduce default bootdelay to 3 seconds Nikita Kiryanov
[U-Boot] [PATCH 2/3] cm_t35: turn on GPIO commands Nikita Kiryanov
[U-Boot] [PATCH 3/3] cm_t35: update lcd predefines Nikita Kiryanov
[U-Boot] [PATCH V2 3/3] cm_t35: update lcd predefines Nikita Kiryanov
[U-Boot] [PATCH 0/3] Add support for SPI based DataImage LCD panel Nikita Kiryanov
[U-Boot] [PATCH 1/3] spi: omap3: add support for more word lengths Nikita Kiryanov
[U-Boot] [PATCH 2/3] lcd: add DataImage SCF0403x LCD panel support Nikita Kiryanov
[U-Boot] [PATCH 3/3] cm_t35: use scf0403 driver Nikita Kiryanov
[U-Boot] [PATCH 1/3] spi: omap3: add support for more word lengths Nikita Kiryanov
[U-Boot] [PATCH V2 0/6] Add support for SPI based DataImage LCD panel Nikita Kiryanov
[U-Boot] [PATCH V2 1/6] spi: omap3: remove semicolon from #define Nikita Kiryanov
[U-Boot] [PATCH V2 2/6] spi: omap3: add support for more word lengths Nikita Kiryanov
[U-Boot] [PATCH V2 3/6] spi: define SPI_XFER_ONCE Nikita Kiryanov
[U-Boot] [PATCH V2 4/6] lcd: add DataImage SCF0403x LCD panel support Nikita Kiryanov
[U-Boot] [PATCH V2 5/6] omap3_dss: define DSS_ONOFF Nikita Kiryanov
[U-Boot] [PATCH V2 6/6] cm_t35: use scf0403 driver Nikita Kiryanov
[U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
[U-Boot] [PATCH v6] usb: new board-specific USB init interface Troy Kisky
[U-Boot] [PATCH v6] usb: new board-specific USB init interface Troy Kisky
[U-Boot] [PATCH V6 00/10] Make mv_udc work for i.mx6 Troy Kisky
[U-Boot] [PATCH V6 01/10] usb: rename board_usb_init_type to usb_init_type Troy Kisky
[U-Boot] [PATCH V6 02/10] usb: add enum usb_init_type parameter to usb_lowlevel_init Troy Kisky
[U-Boot] [PATCH V6 03/10] usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. Troy Kisky
[U-Boot] [PATCH V6 04/10] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT Troy Kisky
[U-Boot] [PATCH V6 05/10] usb: ehci-mx6: add support for otg port Troy Kisky
[U-Boot] [PATCH V6 06/10] usb: gadget: mv_udc: fix full speed connections Troy Kisky
[U-Boot] [PATCH V6 07/10] usb: gadget: mv_udc: optimize bounce Troy Kisky
[U-Boot] [PATCH V6 08/10] usb: gadget: mv_udc: optimize ep_enable Troy Kisky
[U-Boot] [PATCH V6 09/10] usb: gadget: mv_udc: split mv_udc.h file Troy Kisky
[U-Boot] [PATCH V6 10/10] usb: udc: add udc.h include file Troy Kisky
[U-Boot] [PULL] u-boot-usb/master Troy Kisky
[U-Boot] [PATCH 1/1] usb: rename board_usb_init_type to usb_init_type Troy Kisky
[U-Boot] [RFC PATCH v2 0/2] ARMV7: OMAP4: Add support for twl6032 Oleg Kosheliev
[U-Boot] [RFC PATCH v2 1/2] ARMV7: OMAP4: Add struct for twl603x data Oleg Kosheliev
[U-Boot] [RFC PATCH v2 2/2] ARMV7: OMAP4: Add twl6032 support Oleg Kosheliev
[U-Boot] ARM: interrupt_init before relocation, write fails Joe Kulikauskas
[U-Boot] [PATCH] usb:ohci-hcd: submit_common_msg: report actual_length properly Mateusz Kulikowski
[U-Boot] [PATCH v2] usb: ohci-hcd: submit_common_msg: report actual_length properly Mateusz Kulikowski
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Mateusz Kulikowski
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Mateusz Kulikowski
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Mateusz Kulikowski
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Mateusz Kulikowski
[U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel Ajay Kumar
[U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux Ajay Kumar
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Vipin Kumar
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Vipin Kumar
[U-Boot] [PATCH] powerpc/t1040: enable PBL tool for T1040 Prabhakar Kushwaha
[U-Boot] [PATCH 0/6] powerpc: Add support 2 stage boot loader for corenet platform Prabhakar Kushwaha
[U-Boot] [PATCH 1/6] powerpc:Add support of SPL non-relocation Prabhakar Kushwaha
[U-Boot] [PATCH 2/6] powerpc/SPL:Allow Parsing of LAW table in both SPL & non SPL Prabhakar Kushwaha
[U-Boot] [PATCH 3/6] common/env: Point default envirenoment for GD Prabhakar Kushwaha
[U-Boot] [PATCH 4/6] Makefile:Add u-boot-with-spl-pbl.bin target for SPL Prabhakar Kushwaha
[U-Boot] [PATCH 5/6] SPL:Defines function required to env read for IFC & env_nand Prabhakar Kushwaha
[U-Boot] [PATCH 6/6] T1040QDS: Add support of 2 stage NAND boot loader Prabhakar Kushwaha
[U-Boot] [PATCH 1/3][v4] mtd: move & update nand_ecclayout structure Prabhakar Kushwaha
[U-Boot] [PATCH 2/3][v4] mtd/ifc: Add support of 8K page size NAND flash Prabhakar Kushwaha
[U-Boot] [PATCH 3/3][v4] board/c29xpcie: Add support of 8K page size NAND flash Prabhakar Kushwaha
[U-Boot] [PATCH] driver/mtd/ifc: Read Status while programming NAND flash Prabhakar Kushwaha
[U-Boot] [PATCH 2/3][v5] mtd/ifc: Add support of 8K page size NAND flash Prabhakar Kushwaha
[U-Boot] [PATCH 3/3][v5] board/c29xpcie: Add support of 8K page size NAND flash Prabhakar Kushwaha
[U-Boot] [PATCH 1/3][v5] mtd: move & update nand_ecclayout structure Prabhakar Kushwaha
[U-Boot] [PATCH 0/6][v2] powerpc: Add support 2 stage boot loader for corenet platform Prabhakar Kushwaha
[U-Boot] [PATCH 1/6][v2] powerpc:Add support of SPL non-relocation Prabhakar Kushwaha
[U-Boot] [PATCH 2/6][v2] powerpc/SPL:Allow Parsing of LAW table in both SPL & non SPL Prabhakar Kushwaha
[U-Boot] [PATCH 3/6][v2] common/env: Point default envirenoment for GD Prabhakar Kushwaha
[U-Boot] [PATCH 4/6][v2] Makefile:Add u-boot-with-spl-pbl.bin target for SPL Prabhakar Kushwaha
[U-Boot] [PATCH 5/6][v2] SPL:Defines function required to env read for IFC & env_nand Prabhakar Kushwaha
[U-Boot] [PATCH 6/6][v2] T1040QDS: Add support of 2 stage NAND boot loader Prabhakar Kushwaha
[U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver Prabhakar Kushwaha
[U-Boot] SPDX License IDs - moving forward Mats Kärrman
[U-Boot] [PATCH] serial: mxs_auart: Staticize local functions Axel Lin
[U-Boot] [PATCH] serial: mxs_auart: Staticize local functions Axel Lin
[U-Boot] [PATCH 1/2] serial: xuartlite: Staticize local functions Axel Lin
[U-Boot] [PATCH 2/2] serial: s5p: Staticize local functions Axel Lin
[U-Boot] [PATCH v2 1/2] serial: xuartlite: Staticize local functions Axel Lin
[U-Boot] [PATCH v2 2/2] serial: s5p: Staticize local functions Axel Lin
[U-Boot] [PATCH] powerpc/c29xpcie: reverse CPLD register bit Po Liu
[U-Boot] [PATCH v4] powerpc/p1010rdb: update readme for p1010rdb-pa and p1010rdb-pb Shengzhou Liu
[U-Boot] [PATCH v3 11/11] mpc85xx: introduce the kmp204x reference design support Valentin Longchamp
[U-Boot] [PATCH v4 0/11] Support for the kmp204x reference design Valentin Longchamp
[U-Boot] [PATCH v4 01/11] powerpc: cast bi_memsize to ulong for %ld usage Valentin Longchamp
[U-Boot] [PATCH v4 02/11] km-powerpc: move SYS_MALLOC_LEN out of keymile-common.h Valentin Longchamp
[U-Boot] [PATCH v4 03/11] KM: fix typo in default environment Valentin Longchamp
[U-Boot] [PATCH v4 04/11] KM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned board Valentin Longchamp
[U-Boot] [PATCH v4 05/11] KM: add CONFIG_KM_COMMON_ETH_INIT for km common eth init Valentin Longchamp
[U-Boot] [PATCH v4 06/11] mpc8xxx: call i2c_set_bus_num in __get_spd Valentin Longchamp
[U-Boot] [PATCH v4 07/11] mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it Valentin Longchamp
[U-Boot] [PATCH v4 08/11] net/fman: add a fm_enable_port function Valentin Longchamp
[U-Boot] [PATCH v4 09/11] mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into account Valentin Longchamp
[U-Boot] [PATCH v4 10/11] fsl/mpc85xx: define common serdes_clock_to_string function Valentin Longchamp
[U-Boot] [PATCH v4 11/11] mpc85xx: introduce the kmp204x reference design support Valentin Longchamp
[U-Boot] [PATCH 1/6] exynos: Use common pmic_reg_update() definition Lukasz Majewski
[U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus Lukasz Majewski
[U-Boot] [PATCH 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11 Lukasz Majewski
[U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus Lukasz Majewski
[U-Boot] [PATCH 00/10] usb: Support for TIZEN's THOR download protocol Lukasz Majewski
[U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer Lukasz Majewski
[U-Boot] [PATCH 02/10] dfu:core: Find DFU alt setting number by passing its name Lukasz Majewski
[U-Boot] [PATCH 03/10] dfu:core: Export dfu_{get|free}_buf functions Lukasz Majewski
[U-Boot] [PATCH 04/10] usb:g_dnl: Replace static usb_configuration structure with dynamically allocated one Lukasz Majewski
[U-Boot] [PATCH 05/10] usb:g_dnl: Add name parameter to g_dnl_bind_fixup function Lukasz Majewski
[U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol Lukasz Majewski
[U-Boot] [PATCH 07/10] usb:g_dnl: Support for TIZEN's THOR function at generic download code Lukasz Majewski
[U-Boot] [PATCH 08/10] cmd:thor: Support for TIZEN's download (thordown) command Lukasz Majewski
[U-Boot] [PATCH 09/10] samsung:common:thor: Define common Samsung code to handle THOR usb descriptor setup Lukasz Majewski
[U-Boot] [PATCH 10/10] trats: Update TRATS config to support TIZEN download Lukasz Majewski
[U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus Lukasz Majewski
[U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer Lukasz Majewski
[U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol Lukasz Majewski
[U-Boot] [PATCH 10/10] trats: Update TRATS config to support TIZEN download Lukasz Majewski
[U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num() Lukasz Majewski
[U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus Lukasz Majewski
[U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num() Lukasz Majewski
[U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol Lukasz Majewski
[U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer Lukasz Majewski
[U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer Lukasz Majewski
[U-Boot] [PATCH v2 00/10] usb: Support for TIZEN's THOR download protocol Lukasz Majewski
[U-Boot] [PATCH v2 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer Lukasz Majewski
[U-Boot] [PATCH v2 02/10] dfu:core: Find DFU alt setting number by passing its name Lukasz Majewski
[U-Boot] [PATCH v2 03/10] dfu:core: Export dfu_{get|free}_buf functions Lukasz Majewski
[U-Boot] [PATCH v2 04/10] usb:g_dnl: Replace static usb_configuration structure with dynamically allocated one Lukasz Majewski
[U-Boot] [PATCH v2 05/10] usb:g_dnl: Add name parameter to g_dnl_bind_fixup function Lukasz Majewski
[U-Boot] [PATCH v2 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol Lukasz Majewski
[U-Boot] [PATCH v2 07/10] usb:g_dnl: Support for TIZEN's THOR function in generic download code Lukasz Majewski
[U-Boot] [PATCH v2 08/10] cmd:thor: Support for TIZEN's download command (thordown) Lukasz Majewski
[U-Boot] [PATCH v2 09/10] samsung:common:thor: Define common Samsung code to handle THOR usb descriptor setup Lukasz Majewski
[U-Boot] [PATCH v2 10/10] trats: Update TRATS config to support TIZEN download Lukasz Majewski
[U-Boot] [PATCH V2 1/6] exynos: Use common pmic_reg_update() definition Lukasz Majewski
[U-Boot] [PATCH V2 2/6] power: Explicitly select pmic device's bus Lukasz Majewski
[U-Boot] [PATCH V2 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11 Lukasz Majewski
[U-Boot] U-Boot Regression Testing Lukasz Majewski
[U-Boot] [RFC PATCH] usb: dfu: make nand upload working Lukasz Majewski
[U-Boot] Question about dfu flash rootfs image Lukasz Majewski
[U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly Lukasz Majewski
[U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer Lukasz Majewski
[U-Boot] [PATCH v1 4/5] usb, g_dnl: make bcdDevice value configurable Lukasz Majewski
[U-Boot] [PATCH v1 3/5] usb, g_dnl: make iSerialNumber board configurable Lukasz Majewski
[U-Boot] [PATCH v1 3/5] usb, g_dnl: make iSerialNumber board configurable Lukasz Majewski
[U-Boot] [PATCH v2 1/5] usb: ums: code refactoring to improve reusability on other boards. Lukasz Majewski
[U-Boot] [U-boot] DFU and fastboot question Lukasz Majewski
[U-Boot] SPL Dfu update Lukasz Majewski
[U-Boot] [PATCH] arm: trats: add the sd-card power control function. Lukasz Majewski
[U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution Lukasz Majewski
[U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution Lukasz Majewski
[U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH 7/9][v3] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Claudiu Manoil
[U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Przemyslaw Marczak
[U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Przemyslaw Marczak
[U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Przemyslaw Marczak
[U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Przemyslaw Marczak
[U-Boot] [PATCH v4 1/2] arm:goni: Update configuration for goni target Przemyslaw Marczak
[U-Boot] [PATCH v4 2/2] arm:goni:dfu Add support for DFU at GONI target Przemyslaw Marczak
[U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Przemyslaw Marczak
[U-Boot] [PATCH 0/4] USB: UMS: code refactoring and usage improvement Przemyslaw Marczak
[U-Boot] [PATCH 1/4] usb: ums: move ums code from trats to Samsung common directory Przemyslaw Marczak
[U-Boot] [PATCH 2/4] usb: ums: code refactoring to improve reusability at other boards. Przemyslaw Marczak
[U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation. Przemyslaw Marczak
[U-Boot] [PATCH 4/4] usb: ums: add ums exit feature by ctrl+c or by detach usb cable Przemyslaw Marczak
[U-Boot] [PATCH 1/4] usb: ums: move ums code from trats to Samsung common directory Przemyslaw Marczak
[U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation. Przemyslaw Marczak
[U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation. Przemyslaw Marczak
[U-Boot] [PATCH v2 0/5] USB: UMS: code refactoring and usage improvement Przemyslaw Marczak
[U-Boot] [PATCH v2 1/5] usb: ums: code refactoring to improve reusability on other boards. Przemyslaw Marczak
[U-Boot] [PATCH v2 2/5] usb: ums: allows using every mmc device with ums. Przemyslaw Marczak
[U-Boot] [PATCH v2 3/5] usb: ums: fix disk capacity miscalculation and code cleanup Przemyslaw Marczak
[U-Boot] [PATCH v2 4/5] usb: ums: move ums code from trats to Samsung common directory Przemyslaw Marczak
[U-Boot] [PATCH v2 5/5] usb: ums: add ums exit feature by ctrl+c or by detach usb cable Przemyslaw Marczak
[U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Przemyslaw Marczak
[U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Przemyslaw Marczak
[U-Boot] [PATCH 1/2][v2]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs Ramneek Mehresh
[U-Boot] [PATCH 1/2][v3]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs Ramneek Mehresh
[U-Boot] [PATCH] powerpc/83xx: Define USB1 and USB2 base addr for MPC834x Ramneek Mehresh
[U-Boot] SPDX License IDs - moving forward Meier, Roger
[U-Boot] [PATCH 0/2] mmc: Fix capacity calculation and erase_group_size Oliver Metz
[U-Boot] [PATCH 1/2] mmc: Fix calculation of capacity for hc cards Oliver Metz
[U-Boot] [PATCH 2/2] mmc: Fix erase_grp_size for partitioned card Oliver Metz
[U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC Dan Murphy
[U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC Dan Murphy
[U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC Dan Murphy
[U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC Dan Murphy
[U-Boot] TI xHCI updates Dan Murphy
[U-Boot] [PATCH 1/6] usb: omap: Move the xhci-omap header file to common location Dan Murphy
[U-Boot] [PATCH 2/6] usb: omap5: Change the board_usb_init api to board_xhci_usb_init Dan Murphy
[U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory Dan Murphy
[U-Boot] [PATCH 4/6] usb: dra7xx: Add support for dra7xx xhci USB host Dan Murphy
[U-Boot] [PATCH 5/6] usb: am437x: Add support for am437x xhci USB host Dan Murphy
[U-Boot] [PATCH 6/6] ARM: omap5-evm: Move MAC creation to misc_init Dan Murphy
[U-Boot] TI xHCI updates Dan Murphy
[U-Boot] [PATCH] ARM: omap4-panda: Add MAC address creation for panda Dan Murphy
[U-Boot] [PATCH] ARM: omap4: Update sdram setting for panda rev A6 Dan Murphy
[U-Boot] [PATCH] ARM: omap4-panda: Add MAC address creation for panda Dan Murphy
[U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory Dan Murphy
[U-Boot] [PATCH 1/6] usb: omap: Move the xhci-omap header file to common location Dan Murphy
[U-Boot] [PATCH 2/6] usb: omap5: Change the board_usb_init api to board_xhci_usb_init Dan Murphy
[U-Boot] TI xHCI updates Dan Murphy
[U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory Dan Murphy
[U-Boot] [Patch v2] ARM: omap4-panda: Add MAC address creation for panda Dan Murphy
[U-Boot] [PATCH v2 0/6] TI xHCI Updated patchset Dan Murphy
[U-Boot] [PATCH v2 1/6] usb: omap: Move the xhci-omap header file to common location Dan Murphy
[U-Boot] [PATCH v2 2/6] usb: omap5: Update the board_usb_init api Dan Murphy
[U-Boot] [PATCH v2 3/6] usb: omap: Move the usb phy code to the usb/phy directory Dan Murphy
[U-Boot] [PATCH v2 4/6] usb: dra7xx: Add support for dra7xx xhci USB host Dan Murphy
[U-Boot] [PATCH v2 5/6] usb: am437x: Add support for am437x xhci USB host Dan Murphy
[U-Boot] [PATCH v2 6/6] ARM: omap5-evm: Move MAC creation to misc_init Dan Murphy
[U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3 Dan Murphy
[U-Boot] [PATCH] usb: Fix error handling in musb_hcd.c Andrew Murray
[U-Boot] [PATCH v2] usb: Prevent using reserved registers on DM36x usb Andrew Murray
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Eric Nelson
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Eric Nelson
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Eric Nelson
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Eric Nelson
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Eric Nelson
[U-Boot] [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations Eric Nelson
[U-Boot] Bootdelay -1 for none autoboot does not work Eric Nelson
[U-Boot] [PATCH] i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt Eric Nelson
[U-Boot] [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations Eric Nelson
[U-Boot] [PATCH] video: ipu_disp: Fix clock polarity logic Eric Nelson
[U-Boot] SPL Dfu update Eric Nelson
[U-Boot] SPL Dfu update Eric Nelson
[U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot." Robert Nelson
[U-Boot] Bad Linux ARM zImage magic Robert Nelson
[U-Boot] check if board is in uboot / kernel via ethernet? Andreas Neubacher
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Markus Niebel
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Markus Niebel
[U-Boot] u-boot boot process is broken, how do i recover? Philippe Noisette
[U-Boot] [PPC] get_timer without CONFIG_INTERRUPTS Chris Packham
[U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init Hector Palacios
[U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init Hector Palacios
[U-Boot] fatls shows duplicated entries with long and short names Hector Palacios
[U-Boot] fatls shows duplicated entries with long and short names Hector Palacios
[U-Boot] [PATCH] Add support for SX151x SPI GPIO Expanders Viktar Palstsiuk
[U-Boot] [PATCH v2] Add support for SX151x SPI GPIO Expanders Viktar Palstsiuk
[U-Boot] SPL initialization for DDR memory Laszlo Papp
[U-Boot] Changing CONFIG_SYS_PROMPT on the fly Laszlo Papp
[U-Boot] Changing CONFIG_SYS_PROMPT on the fly Laszlo Papp
[U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3 Hardik Patel
[U-Boot] [PATCH 1/3] cmd_ubifs: normalize 'file not found' errors Luka Perkov
[U-Boot] [PATCH 2/3] cmd_reiser: normalize 'file not found' errors Luka Perkov
[U-Boot] [PATCH 3/3] cmd_zfs: normalize 'file not found' errors Luka Perkov
[U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config Luka Perkov
[U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config Luka Perkov
[U-Boot] [PATCH] cosmetic: sf: hex values are in lower case Luka Perkov
[U-Boot] [PATCH] sf: probe: add support for MX25L2006E Luka Perkov
[U-Boot] [PATCH] boards.cfg: remove git leftovers Luka Perkov
[U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config Luka Perkov
[U-Boot] declaring and initializing variables Kim Phillips
[U-Boot] declaring and initializing variables Kim Phillips
[U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller. Sourav Poddar
[U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT]: Mcspi/qspi conflicting configs leading to build failure. Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 0/6] Add TI qspi controller with memory mapped support Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 1/6] omap5: add qspi support Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 2/6] armv7: hw_data: change clock divider setting. Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 5/6] dra7xx_evm: add SPL API, QSPI, and serial flash support Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation. Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation. Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation. Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv5 0/6] Add TI qspi controller with memory mapped support. Sourav Poddar
[U-Boot] [UBOOT][PATCHv5 1/6] omap5: add qspi support Sourav Poddar
[U-Boot] [UBOOT][PATCHv5 2/6] armv7: hw_data: change clock divider setting. Sourav Poddar
[U-Boot] [UBOOT][PATCHv5 3/6] sf: Add memory mapped read support Sourav Poddar
[U-Boot] [UBOOT][PATCHv5 4/6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv5 5/6] dra7xx_evm: add SPL API, QSPI, and serial flash support Sourav Poddar
[U-Boot] [UBOOT][PATCHv5 6/6] README: qspi usecase and testing documentation. Sourav Poddar
[U-Boot] [PATCH v6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support. Sourav Poddar
[U-Boot] [UBOOT][PATCHv6 1/6] omap5: add qspi support Sourav Poddar
[U-Boot] [UBOOT][PATCHv6 2/6] armv7: hw_data: change clock divider setting. Sourav Poddar
[U-Boot] [UBOOT][PATCHv6 3/6] sf: Add memory mapped read support Sourav Poddar
[U-Boot] [UBOOT][PATCHv6 4/6] spi: add TI QSPI driver Sourav Poddar
[U-Boot] [UBOOT][PATCHv6 5/6] dra7xx_evm: add SPL API, QSPI, and serial flash support Sourav Poddar
[U-Boot] [UBOOT][PATCHv6 6/6] README: qspi usecase and testing documentation. Sourav Poddar
[U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash. Sourav Poddar
[U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash. Sourav Poddar
[U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support. Sourav Poddar
[U-Boot] [Uboot][PATCH] drivers: spi: macronix: Add MX66L51235L data Sourav Poddar
[U-Boot] Setting board revision and serial with device tree Lars Poeschel
[U-Boot] powerpc/mpc85xx: Increase image size Kushwaha Prabhakar-B32579
[U-Boot] Does FDI-LPC3250-UART 6 and 7 Init in UBOOT or Not ? Pradeep
[U-Boot] fdt performance Michael Pratt
[U-Boot] fdt performance Michael Pratt
[U-Boot] [PATCH] powerpc/t1040qds: Add DDR Raw Timing support Jain Priyanka-B32167
[U-Boot] [PATCH] ARM: align MVBAR on 32 byte boundary Andre Przywara
[U-Boot] [PATCH] ARM: virtualization: replace verbose license with SPDX identifier Andre Przywara
[U-Boot] [PATCH v4] PCIe:change the method to get the address of a requested capability in configuration space. Zhao Qiang
[U-Boot] [PATCH v5] PCIe:change the method to get the address of a requested capability in configuration space. Zhao Qiang
[U-Boot] FW: [PATCH v3] PCIe:change the method to get the address of a requested capability in configuration space. Zhao Qiang-B45475
[U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings Sricharan R
[U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings Sricharan R
[U-Boot] [PATCH V2] ARM: OMAP5: DDR3: Change io settings Sricharan R
[U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings Sricharan R
[U-Boot] [PATCH V3] ARM: OMAP5: DDR3: Change io settings Sricharan R
[U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver Suriyan Ramasami
[U-Boot] [Patch v1 1/1] jffs2: change U_BOOT_CMD ls to fsls Suriyan Ramasami
[U-Boot] [Patch v1 1/1] jffs2: change U_BOOT_CMD ls to fsls Suriyan Ramasami
[U-Boot] [PATCH v1 1/1] netconsole loses 2nd character of input Suriyan Ramasami
[U-Boot] SPDX-License-Identifier on new files D Rambo
[U-Boot] [PATCH v3 1/2] Tegra114: Fix PLLX M, N, P init settings Thierry Reding
[U-Boot] [PATCH v3 2/2] Tegra114: Do not program CPCON field for PLLX Thierry Reding
[U-Boot] [PATCH v2 2/2] Tegra114: Do not program CPCON field for PLLX Thierry Reding
[U-Boot] [PATCH 1/8] Tegra124: Add arch-tegra124 include/header files Thierry Reding
[U-Boot] [PATCH 2/8] Tegra124: Add changes to common arch-tegra header files Thierry Reding
[U-Boot] [PATCH 3/8] Tegra124: Add SPL/AVP (arm720t) cpu files Thierry Reding
[U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30 Thierry Reding
[U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30 Thierry Reding
[U-Boot] imximage on the MX50 Andre Renaud
[U-Boot] imximage on the MX50 Andre Renaud
[U-Boot] fdt performance Andre Renaud
[U-Boot] [PATCH] am335x: Enable CONFIG_OMAP_WATCHDOG support Tom Rini
[U-Boot] [PULL] u-boot-usb/master Tom Rini
[U-Boot] Buildman changes for release Tom Rini
[U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards Tom Rini
[U-Boot] [i2c] Pull request Tom Rini
[U-Boot] [PATCH 1/2] SPL: Add CONFIG_SPL_BOOTCOUNT_SUPPORT Tom Rini
[U-Boot] [PATCH 0/2] Add bootcount support to SPL Tom Rini
[U-Boot] Pull request: u-boot-arm/master Tom Rini
[U-Boot] [ANN] v2013.10-rc4 Tom Rini
[U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC Tom Rini
[U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC Tom Rini
[U-Boot] [ANN] v2013.10-rc4 Tom Rini
[U-Boot] [PATCH v13 1/6] core support of arm64 Tom Rini
[U-Boot] [U-Boot, u-boot, RFC, v1] sdp4430: Initialize board id using CONFIG_MACH_TYPE Tom Rini
[U-Boot] [PATCH] TI:armv7: Change CONFIG_SYS_SPL_ARGS_ADDR to a higher address Tom Rini
[U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x' Tom Rini
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Tom Rini
[U-Boot] Pull request: u-boot-arm/master Tom Rini
[U-Boot] [PATCH] dra7xx_evm: Enabled UART-boot mode and add dra7xx_evm_uart3 build Tom Rini
[U-Boot] [PATCH 02/11] env_mmc.c: Make the non-redundant env_relocate_spec use malloc not stack Tom Rini
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Tom Rini
[U-Boot] [PATCH 01/11] fw_env.c: Increase max dev path to 32 Tom Rini
[U-Boot] Please pull u-boot-ti/master Tom Rini
[U-Boot] [PATCH 01/11] fw_env.c: Increase max dev path to 32 Tom Rini
[U-Boot] fs/fs.c - error handling needed? Tom Rini
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Tom Rini
[U-Boot] Prevent null pointer dereference originating in cmd_pxe.c Tom Rini
[U-Boot] fs/fs.c - error handling needed? Tom Rini
[U-Boot] ARM: virtualization: replace verbose license with SPDX identifier Tom Rini
[U-Boot] [PATCH] Fix number base handling of "load" command Tom Rini
[U-Boot] pci: Properly configure prefetchable memory region Tom Rini
[U-Boot] power:pmic: prevent data abort for pmic bat command Tom Rini
[U-Boot] [U-Boot, v3, 1/3] mtd: Fix function description in part_validate comment Tom Rini
[U-Boot] [U-Boot, v3, 2/3] include/linux/fb.h: Add a missing include for 'list.h' Tom Rini
[U-Boot] [U-Boot, v3, 3/3] doc: Fix a typo in the description in doc/README.JFFS2_NAND Tom Rini
[U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Tom Rini
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Tom Rini
[U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot." Tom Rini
[U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot." Tom Rini
[U-Boot] [PATCH] da850evm.h: Always set CONFIG_CMD_SF, move to by CONFIG_SPI_FLASH Tom Rini
[U-Boot] Pull request: u-boot-spi/master Tom Rini
[U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot." Tom Rini
[U-Boot] Pull request: u-boot-arm/master Tom Rini
[U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot." Tom Rini
[U-Boot] [ANN] v2013.10-rc4 Tom Rini
[U-Boot] [ANN] v2013.10-rc4 Tom Rini
[U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs Tom Rini
[U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs Tom Rini
[U-Boot] [PATCH v2] usb: Prevent using reserved registers on DM36x usb Tom Rini
[U-Boot] [PATCH] omap5_common: Re-work mmc boot to try SD and eMMC, correct root device Tom Rini
[U-Boot] [PATCH] ARM: omap4-panda: Add MAC address creation for panda Tom Rini
[U-Boot] Pull request: nand flash Tom Rini
[U-Boot] FW: [PATCH v3] PCIe:change the method to get the address of a requested capability in configuration space. Tom Rini
[U-Boot] Pull request: nand flash Tom Rini
[U-Boot] [U-Boot, v2] usb: Prevent using reserved registers on DM36x usb Tom Rini
[U-Boot] [PATCH] omap5_common: Re-work mmc boot to try SD and eMMC, correct root device Tom Rini
[U-Boot] [PATCH] am335x_evm.h: Make 'am335x_boneblack' use redundant environment Tom Rini
[U-Boot] [PATCH] cmd_sandbox.c: Update for do_(load|save) not taking a number base Tom Rini
[U-Boot] [PATCH 3/3] sf: using the same license header format Tom Rini
[U-Boot] [PATCH] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones Tom Rini
[U-Boot] [PATCH 2/2] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones Tom Rini
[U-Boot] Pull request: nand flash Tom Rini
[U-Boot] Pull request: nand flash Tom Rini
[U-Boot] sandbox is broken Tom Rini
[U-Boot] omap3 usb boot Tom Rini
[U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7 Tom Rini
[U-Boot] SPDX-License-Identifier on new files Tom Rini
[U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable Tom Rini
[U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable Tom Rini
[U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable Tom Rini
[U-Boot] Pull request: nand flash Tom Rini
[U-Boot] [ANN] Release slightly delayed Tom Rini
[U-Boot] Pull request: u-boot-arm/master Tom Rini
[U-Boot] fatls shows duplicated entries with long and short names Tom Rini
[U-Boot] pmic: max77686: fix the wrong offset Tom Rini
[U-Boot] env_mmc: fix buffer allocation for armv7 Tom Rini
[U-Boot] [U-Boot, 1/4, V2] Coding Style cleanup: remove trailing white space Tom Rini
[U-Boot] [U-Boot, 2/4] Coding Style cleanup: replace leading SPACEs by TABs Tom Rini
[U-Boot] [U-Boot, 3/4] Coding Style cleanup: remove trailing empty lines Tom Rini
[U-Boot] [U-Boot, 4/4] Coding Style cleanup: drop some excessive empty lines Tom Rini
[U-Boot] env: dataflash: fix env_init issue Tom Rini
[U-Boot] ARM: omap4: Update sdram setting for panda rev A6 Tom Rini
[U-Boot] SPDX: document dual license notation Tom Rini
[U-Boot] [U-Boot, v2] ARM: omap4-panda: Add MAC address creation for panda Tom Rini
[U-Boot] am335x_evm.h: Make 'am335x_boneblack' use redundant environment Tom Rini
[U-Boot] .gitignore: add auto-generated /include/[s|t]pl-autoconf.mk Tom Rini
[U-Boot] Please pull u-boot-x86 buildman Tom Rini
[U-Boot] Prevent null pointer dereference originating in cmd_pxe.c Tom Rini
[U-Boot] [PATCH] cmd_sandbox.c: Update for do_(load|save) not taking a number base Tom Rini
[U-Boot] buildman: Use env to pick the python from $PATH Tom Rini
[U-Boot] Pull request: u-boot-spi/master Tom Rini
[U-Boot] mtd: fix warnings due to 64-bit partition support Tom Rini
[U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings Tom Rini
[U-Boot] [PATCH 0/2] Microblaze bug-fixes Tom Rini
[U-Boot] [ANN] U-Boot v2013.10 released Tom Rini
[U-Boot] Beaglebone LCD support in U-Boot? Tom Rini
[U-Boot] [ANN] U-Boot v2013.10 released Tom Rini
[U-Boot] Pull request: u-boot-sh/master Tom Rini
[U-Boot] [PATCH v7 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver Tom Rini
[U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver Tom Rini
[U-Boot] Question about CONFIG_ENV_IS_IN_FAT Tom Rini
[U-Boot] [PATCH] TI:omap5: Add rdaddr, use consistent loadaddr values Tom Rini
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Tom Rini
[U-Boot] [PULL] u-boot-usb/master Tom Rini
[U-Boot] [PULL] u-boot-usb/master Tom Rini
[U-Boot] [PATCH 1/1] usb: rename board_usb_init_type to usb_init_type Tom Rini
[U-Boot] Pull request: u-boot-sh/master Tom Rini
[U-Boot] [U-Boot, v2, 3/4] arm: rmobile: kzm9g: Change clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ Tom Rini
[U-Boot] [U-Boot, v2, 4/4] arm: rmobile: armadillo-800eva: Change clock definition of SCIF and TMU Tom Rini
[U-Boot] Pull request: u-boot-mpc85xx/master Tom Rini
[U-Boot] [i2c] Pull request Tom Rini
[U-Boot] [RESEND PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h Tom Rini
[U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3 Tom Rini
[U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere Tom Rini
[U-Boot] Illegal use of FP ops in clock_ti814x.c Tom Rini
[U-Boot] Illegal use of FP ops in clock_ti814x.c Tom Rini
[U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3 Tom Rini
[U-Boot] SPL Dfu update Tom Rini
[U-Boot] SPL Dfu update Tom Rini
[U-Boot] SPL Dfu update Tom Rini
[U-Boot] Pull-request: u-boot-mpc85xx/master Tom Rini
[U-Boot] Pull request: u-boot-video/master Tom Rini
[U-Boot] SPL Dfu update Tom Rini
[U-Boot] SPL Dfu update Tom Rini
[U-Boot] SPL Dfu update Tom Rini
[U-Boot] [PATCH] nand_util.c: Correct licensing Tom Rini
[U-Boot] [PATCH] nand_util.c: Correct licensing Tom Rini
[U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks Tom Rini
[U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles Tom Rini
[U-Boot] SPL Dfu update Tom Rini
[U-Boot] [PATCH v2] nand_util.c: Correct licensing Tom Rini
[U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards Tom Rini
[U-Boot] Suggestion for building all boards Stefan Roese
[U-Boot] [PATCH] mtd: fix warnings due to 64-bit partition support Stefan Roese
[U-Boot] [PATCH v2 1/2] serial: xuartlite: Staticize local functions Stefan Roese
[U-Boot] [PATCH] cmd_nvedit.c: Add env exists command Andrew Ruder
[U-Boot] [PATCH] net: dm9000: random mac address support Andrew Ruder
[U-Boot] [PATCH] net: tftpsrv: Get correct client MAC address Andrew Ruder
[U-Boot] [PATCH] spi: soft_spi: Support NULL din/dout buffers Andrew Ruder
[U-Boot] [PATCH] cmd_nvedit.c: Add env exists command Andrew Ruder
[U-Boot] ARM: interrupt_init before relocation, write fails Andrew Ruder
[U-Boot] problems porting to 2013.x Chris Ruehl
[U-Boot] problems porting to 2013.x Chris Ruehl
[U-Boot] problems porting to 2013.x Chris Ruehl
[U-Boot] problems porting to 2013.x Chris Ruehl
[U-Boot] v2013.10 failed build with jffs2 cmd Chris Ruehl
[U-Boot] v2013.10 failed build with jffs2 cmd Chris Ruehl
[U-Boot] v2013.10 failed build with jffs2 cmd Chris Ruehl
[U-Boot] v2013.10 failed build with jffs2 cmd Chris Ruehl
[U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error Chris Ruehl
[U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error Chris Ruehl
[U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error Chris Ruehl
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Måns Rullgård
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Måns Rullgård
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Måns Rullgård
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Måns Rullgård
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Måns Rullgård
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Måns Rullgård
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Måns Rullgård
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Måns Rullgård
[U-Boot] Illegal use of FP ops in clock_ti814x.c Måns Rullgård
[U-Boot] Illegal use of FP ops in clock_ti814x.c Måns Rullgård
[U-Boot] Illegal use of FP ops in clock_ti814x.c Måns Rullgård
[U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled Vidya Sagar
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Otavio Salvador
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Otavio Salvador
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Otavio Salvador
[U-Boot] [PATCH v3 0/3] Trivial patches ready for merging Otavio Salvador
[U-Boot] [PATCH v3 1/3] mtd: Fix function description in part_validate comment Otavio Salvador
[U-Boot] [PATCH v3 2/3] include/linux/fb.h: Add a missing include for 'list.h' Otavio Salvador
[U-Boot] [PATCH v3 3/3] doc: Fix a typo in the description in doc/README.JFFS2_NAND Otavio Salvador
[U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro Otavio Salvador
[U-Boot] [PATCH 1/2] mx28evk: Use 512k for fdt partition to align it Otavio Salvador
[U-Boot] [PATCH 2/2] mtd: Fix size overflow Otavio Salvador
[U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro Otavio Salvador
[U-Boot] [PATCH 1/2] mx28evk: Use 512k for fdt partition to align it Otavio Salvador
[U-Boot] [PATCH] i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt Otavio Salvador
[U-Boot] Pull request: nand flash Otavio Salvador
[U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro Otavio Salvador
[U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro Otavio Salvador
[U-Boot] [PATCH 0/3] Improved NAND support for mx28evk Otavio Salvador
[U-Boot] [PATCH 1/3] mx28evk: Use 512k for fdt partition to align it Otavio Salvador
[U-Boot] [PATCH 2/3] mx28evk: Add 'nandboot' environment command Otavio Salvador
[U-Boot] [PATCH 3/3] mx28evk: Extend environment to easy write of NAND system Otavio Salvador
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Otavio Salvador
[U-Boot] [PATCH 1/2 v13] Introduced btrfs file-system with btrload command Otavio Salvador
[U-Boot] [PATCH 2/2 v13] Enable btrfs support in mx53loco config Otavio Salvador
[U-Boot] [RESEND PATCH 0/3] mx28evk environment rework for NAND support Otavio Salvador
[U-Boot] [RESEND PATCH 1/3] mx28evk: Use 512k for fdt partition to align it Otavio Salvador
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Otavio Salvador
[U-Boot] [RESEND PATCH 3/3] mx28evk: Extend environment to easy write of NAND system Otavio Salvador
[U-Boot] [RESEND PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro Otavio Salvador
[U-Boot] [PATCH] mx6sabresd: Add eMMC specific environment to allow U-Boot update Otavio Salvador
[U-Boot] [PATCH 0/4] Wandboard support for Future Eletronics 7" WVGA LCD extension board Otavio Salvador
[U-Boot] [PATCH 1/4] mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin Otavio Salvador
[U-Boot] [PATCH 2/4] wandboard: add Future Eletronics 7" WVGA LCD extension board Otavio Salvador
[U-Boot] [PATCH 3/4] wandboard: Use '0' as bootdelay but interruptable Otavio Salvador
[U-Boot] [PATCH 4/4] wandboard: Pass 'quiet' bootparam by default Otavio Salvador
[U-Boot] [PATCH v3 0/5] env: Add support for environment files Otavio Salvador
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Otavio Salvador
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Otavio Salvador
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Otavio Salvador
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Otavio Salvador
[U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file Otavio Salvador
[U-Boot] SPL Dfu update Otavio Salvador
[U-Boot] SPL Dfu update Otavio Salvador
[U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards Otavio Salvador
[U-Boot] Got u-boot-2012.10 running on at91sam9200 - but why does it work? Jens Scharsig
[U-Boot] Got u-boot-2012.10 running on at91rm9200 - but why does it work? Jens Scharsig
[U-Boot] [RFC] i2c_reloc_fixup fails on m68k Jens Scharsig
[U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros Jens Scharsig
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Oliver Schinagl
[PATCH u-boot (sc) 1/3] get_ram_size incorrectly returns long, causing issues with more then 2 GiB of ram. Oliver Schinagl
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Oliver Schinagl
[PATCH u-boot (sc) 2/3] Update all references to get_ram_size to unsigned long Oliver Schinagl
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Oliver Schinagl
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Oliver Schinagl
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Oliver Schinagl
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Oliver Schinagl
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Oliver Schinagl
[U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support Heiko Schocher
[U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support Heiko Schocher
[U-Boot] [i2c] Pull request Heiko Schocher
[U-Boot] [i2c] Pull request Heiko Schocher
[U-Boot] [PATCH 1/4] exynos: i2c: Fix i2c driver to handle NACKs properly Heiko Schocher
[U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus Heiko Schocher
[U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus Heiko Schocher
[U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num() Heiko Schocher
[U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num() Heiko Schocher
[U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus Heiko Schocher
[U-Boot] [PATCH] arm/km: fix i2c mux define for km_kirkwood_128m16 target Heiko Schocher
[U-Boot] Question about dfu flash rootfs image Heiko Schocher
[U-Boot] [RFC] i2c_reloc_fixup fails on m68k Heiko Schocher
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model Heiko Schocher
[U-Boot] [PATCH] RFC: samsung: i2c: Enable new CONFIG_SYS_I2C framework Heiko Schocher
[U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly Heiko Schocher
[U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly Heiko Schocher
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model Heiko Schocher
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model Heiko Schocher
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model Heiko Schocher
[U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support Heiko Schocher
[U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support Heiko Schocher
[U-Boot] [PATCH v8 0/2] I2C: Zynq Heiko Schocher
[U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address Heiko Schocher
[U-Boot] [PATCH] Fix: nommu I2C adapter relocation error Heiko Schocher
[U-Boot] [PATCH 1/2] README: I2C: Fix indent Heiko Schocher
[U-Boot] [PATCH 2/2] i2c: sh_i2c: Avoid using I2C prior to relocation Heiko Schocher
[U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num() Heiko Schocher
[U-Boot] [PATCH v2] i2c: Add support for Renesas rcar Heiko Schocher
[U-Boot] [U-Boot, 1/3] i2c: eliminate warnings in i2c_reloc_fixup function Heiko Schocher
[U-Boot] [U-Boot, 1/3, v4] exynos: i2c: Fix i2c driver to handle NACKs properly Heiko Schocher
[U-Boot] [U-Boot, 2/3, v4] exynos: i2c: Change FDT bus setup code to enumerate ports correctly Heiko Schocher
[U-Boot] [U-Boot, 3/3, v7] i2c: s3c24xx: add hsi2c controller support Heiko Schocher
[U-Boot] i2c: Zynq: Support for TI PCA9548 bus multiplexer Heiko Schocher
[U-Boot] [U-Boot,v4,1/3] i2c: fix init on generic board Heiko Schocher
[U-Boot] [U-Boot,v4,2/3] i2c: mxc: move to new subsystem Heiko Schocher
[U-Boot] [U-Boot, v4, 3/3] i2c: update config using mxc driver to new subsystem Heiko Schocher
[U-Boot] [i2c] Pull request Heiko Schocher
[U-Boot] [PATCH 2/3] arm: kzm9g: Update to new I2C framework Heiko Schocher
[U-Boot] [PATCH 3/3] sh: ecovec: Update to new I2C framework Heiko Schocher
[U-Boot] [PATCH v8 0/2] I2C: Zynq Heiko Schocher
[U-Boot] [PATCH v1 0/3] arm, at91: support for the taurus and corvus board Heiko Schocher
[U-Boot] [PATCH v1 1/3] at91: add defines for reset type Heiko Schocher
[U-Boot] [PATCH v1 2/3] arm, at91: add Siemens board taurus (based on AT91SAM9G20) Heiko Schocher
[U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board Heiko Schocher
[U-Boot] Does uboot support HID-I2C Heiko Schocher
[U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework Heiko Schocher
[U-Boot] [PATCH] video, cfb_console: make background and foreground color configurable Heiko Schocher
[U-Boot] [PATCH] video, formike: change tag/val write Heiko Schocher
[U-Boot] [PATCH v1 0/5] arm, am33xx: update for the am33xx based siemens boards Heiko Schocher
[U-Boot] [PATCH v1 1/5] bootcount: store bootcount var in environment Heiko Schocher
[U-Boot] [PATCH v1 2/5] arm, am33x: make RTC32K OSC enable configurable Heiko Schocher
[U-Boot] [PATCH v1 3/5] usb, g_dnl: make iSerialNumber board configurable Heiko Schocher
[U-Boot] [PATCH v1 4/5] usb, g_dnl: make bcdDevice value configurable Heiko Schocher
[U-Boot] [PATCH v1 5/5] arm, am335x: update for the siemens boards Heiko Schocher
[U-Boot] [PATCH v1 3/5] usb, g_dnl: make iSerialNumber board configurable Heiko Schocher
[U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework Heiko Schocher
[U-Boot] [PATCH v4 04/11] KM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned board Heiko Schocher
[U-Boot] [PATCH v4 06/11] mpc8xxx: call i2c_set_bus_num in __get_spd Heiko Schocher
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Heiko Schocher
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Heiko Schocher
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Heiko Schocher
[U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework Heiko Schocher
[U-Boot] [PATCH v1 2/3] arm, at91: add Siemens board taurus (based on AT91SAM9G20) Heiko Schocher
[U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board Heiko Schocher
[U-Boot] [RFC PATCH 1/7] arm: atmel: sama5d3: early enable PIO peripherals Heiko Schocher
[U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot Heiko Schocher
[U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot Heiko Schocher
[U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros Heiko Schocher
[U-Boot] [PATCH 2/6] i2c: switch from AT91 legacy to ATMEL legacy Heiko Schocher
[U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot Heiko Schocher
[U-Boot] [RFC] [PATCH] [NEXT] arm: keep all sections in ELF file Daniel Schwierzeck
[U-Boot] [PATCH] .gitignore: add auto-generated /include/[s|t]pl-autoconf.mk Daniel Schwierzeck
[U-Boot] [PATCH 07/15] qemu-malta: rename to just "malta" Daniel Schwierzeck
[U-Boot] [PATCH 09/15] malta: support for coreFPGA6 boards Daniel Schwierzeck
[U-Boot] [PATCH 14/15] malta: add script & instructions to flash U-boot Daniel Schwierzeck
[U-Boot] [PATCH 09/15] malta: support for coreFPGA6 boards Daniel Schwierzeck
[U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta" Daniel Schwierzeck
[U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error Daniel Schwierzeck
[U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver Chin Liang See
[U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver Chin Liang See
[U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver Chin Liang See
[U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver Chin Liang See
[U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings Enric Balletbo Serra
[U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings Enric Balletbo Serra
[U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings Enric Balletbo Serra
[U-Boot] [PATCH] env: dataflash: fix env_init issue Bo Shen
[U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support Bo Shen
[U-Boot] [PATCH 2/3] sf: change indentation in <sf_probe.c> Bo Shen
[U-Boot] [PATCH 3/3] sf: using the same license header format Bo Shen
[U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support Bo Shen
[U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support Bo Shen
[U-Boot] Question about dfu flash rootfs image Bo Shen
[U-Boot] [RFC PATCH] usb: dfu: make nand upload working Bo Shen
[U-Boot] Question about dfu flash rootfs image Bo Shen
[U-Boot] [RFC PATCH] usb: dfu: make nand upload working Bo Shen
[U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support Bo Shen
[U-Boot] [RFC PATCH] usb: dfu: make nand upload working Bo Shen
[U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer Bo Shen
[U-Boot] [RFC PATCH 2/2] usb: dfu: correct dfu buffer inited value Bo Shen
[U-Boot] [PATCH 1/2] arm: atmel: at91sam9n12ek: add usb host support Bo Shen
[U-Boot] [PATCH 2/2] arm: atmel: get rid of too many ifdeffery Bo Shen
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Bo Shen
[U-Boot] [PATCH v1 1/3] at91: add defines for reset type Bo Shen
[U-Boot] [PATCH v1 2/3] arm, at91: add Siemens board taurus (based on AT91SAM9G20) Bo Shen
[U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board Bo Shen
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) Bo Shen
[U-Boot] [RFC PATCH 0/7] arm: atmel: sama5d3: enable spl boot from SD card Bo Shen
[U-Boot] [RFC PATCH 1/7] arm: atmel: sama5d3: early enable PIO peripherals Bo Shen
[U-Boot] [RFC PATCH 2/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT Bo Shen
[U-Boot] [RFC PATCH 3/7] arm: atmel: the offset of MULA is 18 in sama5d3 Bo Shen
[U-Boot] [RFC PATCH 4/7] arm: atmel: sama5: correct the error define of DIV Bo Shen
[U-Boot] [RFC PATCH 5/7] arm: atmel: add plla and mck initialize function Bo Shen
[U-Boot] [RFC PATCH 6/7] arm: atmel: add ddr2 initialization function Bo Shen
[U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot Bo Shen
[U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros Bo Shen
[U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot Bo Shen
[U-Boot] [RFC PATCH 2/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT Bo Shen
[U-Boot] [RFC PATCH 5/7] arm: atmel: add plla and mck initialize function Bo Shen
[U-Boot] [RFC PATCH 1/7] arm: atmel: sama5d3: early enable PIO peripherals Bo Shen
[U-Boot] [PATCH 3/6] at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY Bo Shen
[U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot Bo Shen
[U-Boot] [PATCH 0/4] spi: exynos: Improve performance Rajeshwari S Shinde
[U-Boot] [PATCH 1/4] exynos: Export timer_get_us() to get microsecond timer Rajeshwari S Shinde
[U-Boot] [PATCH 2/4] spi: exynos: Support a delay after deactivate Rajeshwari S Shinde
[U-Boot] [PATCH 3/4] spi: exynos: Minimise access to SPI FIFO level Rajeshwari S Shinde
[U-Boot] [PATCH 4/4] spi: exynos: Support word transfers Rajeshwari S Shinde
[U-Boot] [PATCH V3] exynos: spl: Add a custom spi copy function Rajeshwari S Shinde
[U-Boot] [PATCH 00/10 V5] EXYNOS5420: Add SMDK5420 board support Rajeshwari S Shinde
[U-Boot] [PATCH 01/10 V5] EXYNOS5: Create a common board file Rajeshwari S Shinde
[U-Boot] [PATCH 02/10 V5] Exynos5420: Add base addresses for 5420 Rajeshwari S Shinde
[U-Boot] [PATCH 03/10 V5] Exynos5420: Add clock initialization for 5420 Rajeshwari S Shinde
[U-Boot] [PATCH 04/10 V5] Exynos5420: Add DDR3 initialization for 5420 Rajeshwari S Shinde
[U-Boot] [PATCH 05/10 V5] Exynos5420: Add support for 5420 in pinmux and gpio Rajeshwari S Shinde
[U-Boot] [PATCH 06/10 V5] Exynos5420: Add base patch for SMDK5420 Rajeshwari S Shinde
[U-Boot] [PATCH 07/10 V5] DTS: Add dts support for SMDK5420 Rajeshwari S Shinde
[U-Boot] [PATCH 08/10 V5] Config: Add initial config for SMDK5420 Rajeshwari S Shinde
[U-Boot] [PATCH 09/10 V5] SPL: EXYNOS: Prepare for variable size SPL support Rajeshwari S Shinde
[U-Boot] [PATCH 10/10 V5] DWMMC: SMDK5420: Disable SMU for eMMC Rajeshwari S Shinde
[U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support Rajeshwari S Shinde
[U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file Rajeshwari S Shinde
[U-Boot] [PATCH 02/10 V6] Exynos5420: Add base addresses for 5420 Rajeshwari S Shinde
[U-Boot] [PATCH 03/10 V6] Exynos5420: Add clock initialization for 5420 Rajeshwari S Shinde
[U-Boot] [PATCH 04/10 V6] Exynos5420: Add DDR3 initialization for 5420 Rajeshwari S Shinde
[U-Boot] [PATCH 05/10 V6] Exynos5420: Add support for 5420 in pinmux and gpio Rajeshwari S Shinde
[U-Boot] [PATCH 06/10 V6] Exynos5420: Add base patch for SMDK5420 Rajeshwari S Shinde
[U-Boot] [PATCH 07/10 V6] DTS: Add dts support for SMDK5420 Rajeshwari S Shinde
[U-Boot] [PATCH 08/10 V6] Config: Add initial config for SMDK5420 Rajeshwari S Shinde
[U-Boot] [PATCH 09/10 V6] SPL: EXYNOS: Prepare for variable size SPL support Rajeshwari S Shinde
[U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC Rajeshwari S Shinde
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Michal Simek
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Michal Simek
[U-Boot] [PATCH 1/4] Coding Style cleanup: remove trailing white space Michal Simek
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model Michal Simek
[U-Boot] u-boot-xlnx/master-next: build error Michal Simek
[U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed Michal Simek
[U-Boot] [PATCH v2 1/2] serial: xuartlite: Staticize local functions Michal Simek
[U-Boot] [PATCH 0/2] Microblaze bug-fixes Michal Simek
[U-Boot] [PATCH 1/2] common: fsl: Fix broken SPDX-License-Identifier change Michal Simek
[U-Boot] [PATCH 2/2] microblaze: Fix watchdog initialization Michal Simek
[U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address Michal Simek
[U-Boot] [PATCH 0/2] Microblaze bug-fixes Michal Simek
[U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init() Michal Simek
[U-Boot] [PATCH 1/3] fpga: zynqpl: Add dcache flush support Michal Simek
[U-Boot] [PATCH 2/3] fpga: zynqpl: Do not place bitstream below 1MB Michal Simek
[U-Boot] [PATCH 3/3] fpga: Add support for gzip images with bitstreams Michal Simek
[U-Boot] [PATCH v4 4/8] main: Use autoconf to remove #ifdefs around process_boot_delay() Michal Simek
[U-Boot] [PATCH v4 6/8] main: Use autoconf for parser selection Michal Simek
[U-Boot] [PATCH] serial: zynq: Remove unused #defines Michal Simek
[U-Boot] [PATCH 1/2] arm: zynq: Do not remap OCM to high address Michal Simek
[U-Boot] [PATCH 2/2] arm: zynq : Revert TZ_DDR_RAM to secure. Michal Simek
[U-Boot] [PATCH 0/2] Add usb eth support Inderpal Singh
[U-Boot] [PATCH 1/2] usb: ehci: exynos: set/reset hsic phys Inderpal Singh
[U-Boot] [PATCH 2/2] exynos5: arndale: Add network support Inderpal Singh
[U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support Gerhard Sittig
[U-Boot] [PATCH 1/3] spi: omap3: add support for more word lengths Gerhard Sittig
[U-Boot] How/Where does "_start" get assigned a value ? Gerhard Sittig
[U-Boot] How/Where does "_start" get assigned a value ? Gerhard Sittig
[U-Boot] [PATCH v7 09/11] arm: add customized boot command for Faraday Images Kuo-Jung Su
[U-Boot] declaring and initializing variables York Sun
[U-Boot] [PATCH] mpc85xx: Fix the offset of register address error York Sun
[U-Boot] [PATCH][v2] boards/c29xpcie: Update TLB and LAW size for IFC NAND, CPLD York Sun
[U-Boot] [PATCH v13 1/6] core support of arm64 York Sun
[U-Boot] [PATCH] mpc85xx: Fix the offset of register address error York Sun
[U-Boot] [PATCH] mpc85xx: Fix the offset of register address error York Sun
[U-Boot] [PATCH v3] PCIe:change the method to get the address of a requested capability in configuration space. York Sun
[U-Boot] powerpc/mpc85xx: Increase image size York Sun
[U-Boot] powerpc/mpc85xx: Increase image size York Sun
[U-Boot] declaring and initializing variables York Sun
[U-Boot] [PATCH 2/4] cmd_mtdparts: use 64 bits for flash size, partition size & offset York Sun
[U-Boot] [PATCH v2 11/11] mpc85xx: introduce the kmp204x reference design support York Sun
[U-Boot] [PATCH v3 11/11] mpc85xx: introduce the kmp204x reference design support York Sun
[U-Boot] [PATCH v3 11/11] mpc85xx: introduce the kmp204x reference design support York Sun
[U-Boot] powerpc/mpc85xx: Increase image size York Sun
[U-Boot] powerpc/mpc85xx: Increase image size York Sun
[U-Boot] powerpc/mpc85xx: Increase image size York Sun
[U-Boot] powerpc/mpc85xx: Increase image size York Sun
[U-Boot] powerpc/mpc85xx: Increase image size York Sun
[U-Boot] powerpc/mpc85xx: Increase image size York Sun
[U-Boot] Pull request: u-boot-mpc85xx/master York Sun
[U-Boot] [PATCH v2] powerpc/c29xpcie: add DDR ECC on off config setting York Sun
[U-Boot] [PATCH 1/2][v2]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs York Sun
[U-Boot] [PATCH 2/2] powerpc/usb:Differentiate USB controller base address York Sun
[U-Boot] [PATCH 1/2][v2]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs York Sun
[U-Boot] Freescale P4080 DDR problems York Sun
[U-Boot] [PATCH 1/2][v3]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs York Sun
[U-Boot] [PATCH v4 01/11] powerpc: cast bi_memsize to ulong for %ld usage York Sun
[U-Boot] [PATCH v4 02/11] km-powerpc: move SYS_MALLOC_LEN out of keymile-common.h York Sun
[U-Boot] [PATCH v4 03/11] KM: fix typo in default environment York Sun
[U-Boot] [PATCH v4 04/11] KM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned board York Sun
[U-Boot] [PATCH v4 05/11] KM: add CONFIG_KM_COMMON_ETH_INIT for km common eth init York Sun
[U-Boot] [PATCH v4 06/11] mpc8xxx: call i2c_set_bus_num in __get_spd York Sun
[U-Boot] [PATCH v4 07/11] mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it York Sun
[U-Boot] [PATCH v4 08/11] net/fman: add a fm_enable_port function York Sun
[U-Boot] [PATCH v4 09/11] mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into account York Sun
[U-Boot] [PATCH v4 10/11] fsl/mpc85xx: define common serdes_clock_to_string function York Sun
[U-Boot] [PATCH v4 11/11] mpc85xx: introduce the kmp204x reference design support York Sun
[U-Boot] BUILD_NBUILDS with MAKEALL York Sun
[U-Boot] [PATCH] powerpc/83xx: Define USB1 and USB2 base addr for MPC834x York Sun
[U-Boot] Pull-request: u-boot-mpc85xx/master York Sun
[U-Boot] [PATCH 3/6] common/env: Point default envirenoment for GD York Sun
[U-Boot] MPC8641D stucks before relocation York Sun
[U-Boot] MPC8641D stucks before relocation York Sun
[U-Boot] [PATCH] powerpc/t1040qds: Add DDR Raw Timing support York Sun
[U-Boot] [Patch v1 0/6] Move Freescale DDR and IFC drivers to common drivers York Sun
[U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver York Sun
[U-Boot] [Patch v1 2/6] Driver/DDR: combine ccsr_ddr for 83xx, 85xx and 86xx York Sun
[U-Boot] [Patch v1 3/6] Driver/DDR: Add Freescale DDR driver for ARM York Sun
[U-Boot] [Patch v1 4/6] powerpc/mpc8xxx: Extend DDR registers' fields York Sun
[U-Boot] [Patch v1 5/6] Driver/DDR: Update DDR driver to allow non-zero base address York Sun
[U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver York Sun
[U-Boot] declaring and initializing variables Timur Tabi
[U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs Timur Tabi
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Timur Tabi
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Timur Tabi
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Timur Tabi
[U-Boot] [RFD] OMAP5: Working HYP mode Alexander Tarasikov
[U-Boot] [PATCH v2] sf: probe: Add support for EN25S64 Jagan Teki
[U-Boot] [Uboot][PATCH] drivers: spi: macronix: Add MX66L51235L data Jagan Teki
[U-Boot] [PATCH] sf: spansion: Add support for S25FL512S_256K Jagan Teki
[U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller. Jagan Teki
[U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver Jagan Teki
[U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller. Jagan Teki
[U-Boot] [UBOOT]: Mcspi/qspi conflicting configs leading to build failure. Jagan Teki
[U-Boot] : Discussion on Serial Flash Discoverable Parameters (SFDP): JESD216A Jagan Teki
[U-Boot] [PATCH v3] spi: Add support SH Quad SPI driver Jagan Teki
[U-Boot] [PATCH v4] spi: Add support SH Quad SPI driver Jagan Teki
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Jagan Teki
[U-Boot] [PATCH v2 05/12] spi: add Faraday FTSPI010 SPI controller support Jagan Teki
[U-Boot] [PATCH 2/2 V3] spi: exynos: Support a delay after deactivate Jagan Teki
[U-Boot] : SPI patches Jagan Teki
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Jagan Teki
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Jagan Teki
[U-Boot] [PATCH] Fix problems in chip select selection in imx23, 28 spi code Jagan Teki
[U-Boot] [PATCH] Add code for spi half duplex operation for enc28j60 Jagan Teki
[U-Boot] : Discussion on Serial Flash Discoverable Parameters (SFDP): JESD216A Jagan Teki
[U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation. Jagan Teki
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Jagan Teki
[U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support Jagan Teki
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Jagan Teki
[U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation. Jagan Teki
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Jagan Teki
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Jagan Teki
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Jagan Teki
[U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver Jagan Teki
[U-Boot] [UBOOT][PATCHv5 4/6] spi: add TI QSPI driver Jagan Teki
[U-Boot] [UBOOT][PATCHv5 3/6] sf: Add memory mapped read support Jagan Teki
[U-Boot] [PATCH v2] mxc_spi: bugfix for double incrementing read pointer on unaligned buffers in spi_xchg_single Jagan Teki
[U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash. Jagan Teki
[U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash. Jagan Teki
[U-Boot] Prevent null pointer dereference originating in cmd_pxe.c Jagan Teki
[U-Boot] [PATCH v3] sf: Minor cleanups Jagan Teki
[U-Boot] [PATCH 2/3] sf: ramtron: Remove page_size print Jagan Teki
[U-Boot] [PATCH 3/3] doc: SPI: Update SPI status track Jagan Teki
[U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support. Jagan Teki
[U-Boot] [Uboot][PATCH] drivers: spi: macronix: Add MX66L51235L data Jagan Teki
[U-Boot] : SPI patches Jagan Teki
[U-Boot] : SPI patches Jagan Teki
[U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver Jagan Teki
[U-Boot] [PATCH 0/4] spi: exynos: Improve performance Jagan Teki
[U-Boot] [PATCH 0/4] spi: exynos: Improve performance Jagan Teki
[U-Boot] [PATCH 0/4] spi: exynos: Improve performance Jagan Teki
[U-Boot] [PATCH 0/4] spi: exynos: Improve performance Jagan Teki
[U-Boot] [PATCH 0/4] spi: exynos: Improve performance Jagan Teki
[U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver Jagan Teki
[U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver Jagan Teki
[U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver Jagan Teki
[U-Boot] TI xHCI updates Jagan Teki
[U-Boot] [PATCH 3/3] sf: using the same license header format Jagan Teki
[U-Boot] [PATCH 2/3] sf: change indentation in <sf_probe.c> Jagan Teki
[U-Boot] [PATCH 3/3] sf: using the same license header format Jagan Teki
[U-Boot] [PATCH] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones Jagan Teki
[U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support Jagan Teki
[U-Boot] fatls shows duplicated entries with long and short names Jagan Teki
[U-Boot] fatls shows duplicated entries with long and short names Jagan Teki
[U-Boot] [PATCH] buildman: Use env to pick the python from $PATH Jagan Teki
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model Jagan Teki
[U-Boot] [PATCH v2 0/5] spi: cleanup set for v2013.10 rel Jagan Teki
[U-Boot] [PATCH v3] spi: mxc_spi: Fix double incrementing read pointer for unaligned buffers Jagan Teki
[U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed Jagan Teki
[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers. Jagan Teki
[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers. Jagan Teki
[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers. Jagan Teki
[U-Boot] [PATCH v8 0/2] I2C: Zynq Jagan Teki
[U-Boot] [PATCH v5 00/32] sf: Add new probe support Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 01/32] sf: Divide spi_flash into multiple parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 02/32] sf: probe: Add new spi_flash_probe support Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 03/32] sf: probe: Add support for M25P* flash parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 04/32] sf: probe: Add support for EN25Q* flash parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 05/32] sf: probe: Add support for GD25* flash parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 06/32] sf: probe: Add support for MX25L* flash parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 07/32] sf: probe: Add support for W25* flash parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 08/32] sf: probe: Add support for S25FL* flash parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 09/32] sf: probe: Add support for SST25* flash parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 10/32] sf: probe: Add support for AT45DB* flash parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 11/32] sf: probe: Give proper spacing on flash table params Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 12/32] sf: probe: Add support for SST_WP Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 13/32] sf: probe: Add support to clear flash BP# bits Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 14/32] sf: probe: Add support for erase sector selection flag Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 15/32] sf: probe: Add support for flag status polling Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 16/32] sf: probe: Simply the BAR configuration logic Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 17/32] sf: Add proper comment style on spi_flash structure Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 18/32] sf: ramtron: Add support for separate flash driver Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 19/32] sf: Remove unneeded flash drivers files Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 20/32] sf: probe: Add support for EN25Q64 Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 21/32] sf: probe: Add support for S25FL256S_256K Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 22/32] sf: probe: Add support for S25FL512S_256K Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 23/32] sf: probe: Use print_size arg as page_size Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 24/32] sf: probe: Print erase_size while printing flash details Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 25/32] sf: ops: Add static qualifier to spi_flash_cmd_bankaddr_write Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 26/32] sf: probe: Add support for MX25L25635F Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 27/32] sf: probe: Add support for MX25L51235F Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 28/32] sf: Remove spi_flash_do_alloc references Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 29/32] sf: spi_flash cleanups Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 30/32] spi: spi cleanups Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 31/32] sf: Rename spi_flash files Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v5 32/32] doc: SPI: Add status.txt for tracking SPI subsys status Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2] sf: probe: Add support for EN25S64 Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v3] spi: Add support SH Quad SPI driver Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v4] spi: Add support SH Quad SPI driver Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v6] spi: add TI QSPI driver Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 1/3] sf: Minor cleanups Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 2/3] sf: ramtron: Remove page_size print Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 3/3] doc: SPI: Update SPI status track Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2] sf: Minor cleanups Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v3] sf: Minor cleanups Jagannadha Sutradharudu Teki
[U-Boot] Pull request: u-boot-spi/master Jagannadha Sutradharudu Teki
[U-Boot] [PATCH] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 1/2] sf_ops: Unify bank_sel calculation code Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 2/2] sf: Minor cleanups. Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 1/2] sf: Add GPL-2.0+ SPDX-License-Identifier for missing ones Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 2/2] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 0/5] spi: cleanup set for v2013.10 rel Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 1/5] sf_ops: Unify bank_sel calculation code Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 2/5] sf: Minor cleanups. Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 3/5] sf: Add GPL-2.0+ SPDX-License-Identifier for missing ones Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 4/5] spi: Add GPL-2.0+ SPDX-License-Identifier for missing files Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 5/5] sf: probe: Add missing Atmel at25df321 flash Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v3] spi: mxc_spi: Fix double incrementing read pointer for unaligned buffers Jagannadha Sutradharudu Teki
[U-Boot] Pull request: u-boot-spi/master Jagannadha Sutradharudu Teki
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Benoît Thébaudeau
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Benoît Thébaudeau
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Benoît Thébaudeau
[U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro Benoît Thébaudeau
[U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE Benoît Thébaudeau
[U-Boot] Handling hangs (was: [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE) Benoît Thébaudeau
[U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE Benoît Thébaudeau
[U-Boot] Hi, I am new to U-Boot, how do I get started? Dimitar Tomov
[U-Boot] omap3 usb boot Michael Trimarchi
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Michael Trimarchi
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] SPL Dfu update Michael Trimarchi
[U-Boot] [PATCH] powerpc/t4240: set pcie liodn in the correct register Laurentiu Tudor
[U-Boot] [PATCH] powerpc/t4240: fix per pci endpoint liodn offsets Laurentiu Tudor
[U-Boot] [PATCH] powerpc/85xx: fix broken cpu "clock-frequency" property Laurentiu Tudor
[U-Boot] [PATCH] cmd_sf: Mention in the help text that mode, addr, offset and len must be given in hex. Jakob Unterwurzacher
[U-Boot] [PATCH 2/4] wandboard: add Future Eletronics 7" WVGA LCD extension board Tapani Utriainen
[U-Boot] check if board is in uboot / kernel via ethernet? Abraham V.
[U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins Marek Vasut
[U-Boot] [PATCH v5] usb: new board-specific USB init interface Marek Vasut
[U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer Marek Vasut
[U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol Marek Vasut
[U-Boot] [PATCH 10/10] trats: Update TRATS config to support TIZEN download Marek Vasut
[U-Boot] [PATCH] usb: Fix error handling in musb_hcd.c Marek Vasut
[U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer Marek Vasut
[U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol Marek Vasut
[U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer Marek Vasut
[U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer Marek Vasut
[U-Boot] [PATCH v6] usb: new board-specific USB init interface Marek Vasut
[U-Boot] [PATCH v6] usb: new board-specific USB init interface Marek Vasut
[U-Boot] [PATCH 1/6] usb: omap: Move the xhci-omap header file to common location Marek Vasut
[U-Boot] [PATCH 2/6] usb: omap5: Change the board_usb_init api to board_xhci_usb_init Marek Vasut
[U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory Marek Vasut
[U-Boot] [PATCH 5/6] usb: am437x: Add support for am437x xhci USB host Marek Vasut
[U-Boot] TI xHCI updates Marek Vasut
[U-Boot] [PATCH 1/6] usb: omap: Move the xhci-omap header file to common location Marek Vasut
[U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory Marek Vasut
[U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver Marek Vasut
[U-Boot] [PATCH v2 00/10] usb: Support for TIZEN's THOR download protocol Marek Vasut
[U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver Marek Vasut
[U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro Marek Vasut
[U-Boot] [PATCH v2 4/6] usb: dra7xx: Add support for dra7xx xhci USB host Marek Vasut
[U-Boot] [PATCH v2 0/6] TI xHCI Updated patchset Marek Vasut
[U-Boot] [PATCH] Net: FEC: Fix huge memory leak Marek Vasut
[U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init Marek Vasut
[U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init Marek Vasut
[U-Boot] [RFC PATCH] usb: dfu: make nand upload working Marek Vasut
[U-Boot] fatls shows duplicated entries with long and short names Marek Vasut
[U-Boot] [PATCH] serial: mxs_auart: Staticize local functions Marek Vasut
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Marek Vasut
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Marek Vasut
[U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init Marek Vasut
[U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init Marek Vasut
[U-Boot] [PATCH 1/4] usb: ums: move ums code from trats to Samsung common directory Marek Vasut
[U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation. Marek Vasut
[U-Boot] [PATCH 4/4] usb: ums: add ums exit feature by ctrl+c or by detach usb cable Marek Vasut
[U-Boot] [PATCH 1/4] usb: ums: move ums code from trats to Samsung common directory Marek Vasut
[U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer Marek Vasut
[U-Boot] [PATCH v3 08/16] dm: Set up driver model after relocation Marek Vasut
[U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation. Marek Vasut
[U-Boot] [PATCH v4 01/16] sandbox: Make map_to_sysmem() use a constant pointer Marek Vasut
[U-Boot] [PATCH v4 02/16] sandbox: Correct data sizes and printf() strings in fdtdec.c Marek Vasut
[U-Boot] [PATCH v4 03/16] sandbox: config: Don't use 64-bit physical memory Marek Vasut
[U-Boot] [PATCH v4 04/16] sandbox: Build a device tree file for sandbox Marek Vasut
[U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model Marek Vasut
[U-Boot] [PATCH v4 16/16] dm: Move old driver model documentation into an 'old-docs' directory Marek Vasut
[U-Boot] Final talk schedule for U-Boot mini summit and collection of discussion topics Marek Vasut
[U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model Marek Vasut
[U-Boot] [PATCH V6 03/10] usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. Marek Vasut
[U-Boot] [PATCH V6 00/10] Make mv_udc work for i.mx6 Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config Marek Vasut
[U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PATCH] usb:ohci-hcd: submit_common_msg: report actual_length properly Marek Vasut
[U-Boot] [PATCH v5 06/16] dm: Add README for driver model Marek Vasut
[U-Boot] [PATCH 00/18] Third step towards Kbuild: Convert rest of makefiles Marek Vasut
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Marek Vasut
[U-Boot] [PATCH v2 1/5] usb: ums: code refactoring to improve reusability on other boards. Marek Vasut
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Marek Vasut
[U-Boot] [PATCH v2 1/5] usb: ums: code refactoring to improve reusability on other boards. Marek Vasut
[U-Boot] [PATCH v2] usb: ohci-hcd: submit_common_msg: report actual_length properly Marek Vasut
[U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot Marek Vasut
[U-Boot] [PATCH 2/2] ARM: mxs: Configure 2 Gbit DDR2 RAM for BG0900 Marek Vasut
[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command Marek Vasut
[U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot Marek Vasut
[U-Boot] [U-boot] DFU and fastboot question Marek Vasut
[U-Boot] DDR setting, p1020 registers read Avinash Vijayvargia
[U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar
[U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar
[U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config Prafulla Wadaskar
[U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x' Stephen Warren
[U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x' Stephen Warren
[U-Boot] [PATCH] Fix number base handling of "load" command Stephen Warren
[U-Boot] [PATCH] Tegra114: Dalmore: Add voltage reg/PMIC init for various periphs Stephen Warren
[U-Boot] [PATCH] SPDX: document dual license notation Stephen Warren
[U-Boot] [PATCH] Tegra114: Add support for more clock sources for T1x4 periphs Stephen Warren
[U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m Stephen Warren
[U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver Stephen Warren
[U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver Stephen Warren
[U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver Stephen Warren
[U-Boot] [PATCH 1/8] Tegra124: Add arch-tegra124 include/header files Stephen Warren
[U-Boot] [PATCH 3/8] Tegra124: Add SPL/AVP (arm720t) cpu files Stephen Warren
[U-Boot] [PATCH 3/8] Tegra124: Add SPL/AVP (arm720t) cpu files Stephen Warren
[U-Boot] [PATCH 5/8] Tegra124: Add common CPU (shared) files Stephen Warren
[U-Boot] [PATCH 6/8] Tegra124: Add generic T124 build support Stephen Warren
[U-Boot] [PATCH 7/8] Tegra124: Venice2: fdt: Add device-tree files Stephen Warren
[U-Boot] [PATCH 8/8] Tegra124: Add Venice2 (T124) build Stephen Warren
[U-Boot] [PATCH] arm: Tegra: T114: Use common tegra1x4- includes in arch-tegra Stephen Warren
[U-Boot] [PATCH] SPDX: document dual license notation Stephen Warren
[U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail Stephen Warren
[U-Boot] [PATCH 2/2] buildman: make board selector argument a regex Stephen Warren
[U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail Stephen Warren
[U-Boot] [PATCH V2] buildman: make board selector argument a regex Stephen Warren
[U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail Stephen Warren
[U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m Stephen Warren
[U-Boot] [PATCH v2] Tegra114: SPL: Set SCLK source to CLK_M before PLLP init. Stephen Warren
[U-Boot] [PATCH] Tegra114: Add support for more clock sources for T1x4 periphs Stephen Warren
[U-Boot] [PATCH v2] Tegra114: Add support for more clock sources for T114 periphs Stephen Warren
[U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30 Stephen Warren
[U-Boot] [PATCH v2 1/2] ARM: tegra: support SKU b1 of Tegra30 Stephen Warren
[U-Boot] [PATCH v2 2/2] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board Stephen Warren
[U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field Stephen Warren
[U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes Stephen Warren
[U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes Stephen Warren
[U-Boot] [PATCH v2 2/2] video: bcm2835: respect the pitch value Stephen Warren
[U-Boot] [PATCH v2 3/5] Allow U-Boot scripts to be placed in a .env file Stephen Warren
[U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files Stephen Warren
[U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files Stephen Warren
[U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files Stephen Warren
[U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board Stephen Warren
[U-Boot] Configuring U-Boot through device tree Stephen Warren
[U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files Stephen Warren
[U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board Stephen Warren
[U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled Stephen Warren
[U-Boot] [PATCH v2 2/2] Tegra114: Do not program CPCON field for PLLX Tom Warren
[U-Boot] [PATCH] Tegra114: Add support for more clock sources for T1x4 periphs Tom Warren
[U-Boot] [PATCH] Tegra114: Dalmore: Add voltage reg/PMIC init for various periphs Tom Warren
[U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m Tom Warren
[U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver Tom Warren
[U-Boot] [PATCH 1/8] Tegra124: Add arch-tegra124 include/header files Tom Warren
[U-Boot] [PATCH 2/8] Tegra124: Add changes to common arch-tegra header files Tom Warren
[U-Boot] [PATCH 3/8] Tegra124: Add SPL/AVP (arm720t) cpu files Tom Warren
[U-Boot] [PATCH 4/8] Tegra124: Add CPU (armv7) files Tom Warren
[U-Boot] [PATCH 5/8] Tegra124: Add common CPU (shared) files Tom Warren
[U-Boot] [PATCH 6/8] Tegra124: Add generic T124 build support Tom Warren
[U-Boot] [PATCH 7/8] Tegra124: Venice2: fdt: Add device-tree files Tom Warren
[U-Boot] [PATCH 8/8] Tegra124: Add Venice2 (T124) build Tom Warren
[U-Boot] [PATCH] Tegra114: Dalmore: Add voltage reg/PMIC init for various periphs Tom Warren
[U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver Tom Warren
[U-Boot] [PATCH] arm: Tegra: T114: Use common tegra1x4- includes in arch-tegra Tom Warren
[U-Boot] [PATCH] arm: Tegra: Use arch-specific pmc.h where needed, else use common pmc.h Tom Warren
[U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m Tom Warren
[U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m Tom Warren
[U-Boot] [PATCH v2] Tegra114: SPL: Set SCLK source to CLK_M before PLLP init. Tom Warren
[U-Boot] [PATCH] Tegra114: Add support for more clock sources for T1x4 periphs Tom Warren
[U-Boot] [PATCH v2] Tegra114: Add support for more clock sources for T114 periphs Tom Warren
[U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30 Tom Warren
[U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board Tom Warren
[U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled Tom Warren
[U-Boot] [PATCH V2 0/2] add sdhci generic framework Lei Wen
[U-Boot] [Patch v3] cmd/gpt: Support gpt command for all devices Piotr Wilczek
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Piotr Wilczek
[U-Boot] [PATCH] fs:fat: fix set file name function Piotr Wilczek
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Piotr Wilczek
[U-Boot] [Patch v3] cmd/gpt: Support gpt command for all devices Piotr Wilczek
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition Piotr Wilczek
[U-Boot] fdt performance Aaron Williams
[U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs Scott Wood
[U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t Scott Wood
[U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t Scott Wood
[U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs Scott Wood
[U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width Scott Wood
[U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t Scott Wood
[U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width Scott Wood
[U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs Scott Wood
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Scott Wood
[U-Boot] [PATCH 0/4] arm64: rela relocation Scott Wood
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations Scott Wood
[U-Boot] [PATCH 2/4] arm64: Turn u-boot.bin back into an ELF file after relocate-rela Scott Wood
[U-Boot] [PATCH 3/4] arm64: Non-manual relocation Scott Wood
[U-Boot] [PATCH 4/4] arm64: Make checkarmreloc accept arm64 relocations Scott Wood
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Scott Wood
[U-Boot] [PATCH 3/4] arm64: Non-manual relocation Scott Wood
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations Scott Wood
[U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Scott Wood
[U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs Scott Wood
[U-Boot] [PATCH 0/4] arm64: rela relocation Scott Wood
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations Scott Wood
[U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Scott Wood
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations Scott Wood
[U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations Scott Wood
[U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Scott Wood
[U-Boot] [PATCH v7 3/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes Scott Wood
[U-Boot] [PATCH v7 4/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes Scott Wood
[U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Scott Wood
[U-Boot] [PATCH v2 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width Scott Wood
[U-Boot] [PATCH v2 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width Scott Wood
[U-Boot] [PATCH v2 2/4] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width Scott Wood
[U-Boot] [ANN] v2013.10-rc4 Scott Wood
[U-Boot] Pull request: nand flash Scott Wood
[U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Scott Wood
[U-Boot] Pull request: nand flash Scott Wood
[U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Scott Wood
[U-Boot] powerpc/mpc85xx: Increase image size Scott Wood
[U-Boot] [PATCH v14 04/10] arm64: Add tool to statically apply RELA relocations Scott Wood
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Scott Wood
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Scott Wood
[U-Boot] [PATCH] mtd: fix warnings due to 64-bit partition support Scott Wood
[U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform Scott Wood
[U-Boot] powerpc/mpc85xx: Increase image size Scott Wood
[U-Boot] powerpc/mpc85xx: Increase image size Scott Wood
[U-Boot] powerpc/mpc85xx: Increase image size Scott Wood
[U-Boot] powerpc/mpc85xx: Increase image size Scott Wood
[U-Boot] powerpc/mpc85xx: Increase image size Scott Wood
[U-Boot] [ANN] U-Boot v2013.10 released Scott Wood
[U-Boot] [ANN] U-Boot v2013.10 released Scott Wood
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Scott Wood
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Scott Wood
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Scott Wood
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Scott Wood
[U-Boot] [PATCH] powerpc/esdhc: Map register for eSDHC host controller 3.0 Scott Wood
[U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit Scott Wood
[U-Boot] [PATCH 2/2 V2] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register Scott Wood
[U-Boot] [PATCH] nand_util.c: Correct licensing Scott Wood
[U-Boot] [PATCH 0/5] mtd: nand: enable 8k byte page nand flash support for sama5d3x-ek Josh Wu
[U-Boot] [PATCH 1/5] MTD: nand: increase the max eccpos size to 448 to support 8k page nand Josh Wu
[U-Boot] [PATCH 2/5] mtd: atmel_nand: enable PMECC support for 8k bytes page NAND flash Josh Wu
[U-Boot] [PATCH 3/5] sama5d3xek: support larger than 4G nand flash Josh Wu
[U-Boot] [PATCH 4/5] mtd: atmel_nand: don't print bit correction message in driver Josh Wu
[U-Boot] [PATCH 5/5] mtd: atmel_nand: use dev_xxx instead of printk Josh Wu
[U-Boot] [PATCH v2 00/19] First step towards Kbuild: Use Kbuild style makefiles Masahiro Yamada
[U-Boot] Lots of SPDX-License Identifer have a trailing space Masahiro Yamada
[U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile Masahiro Yamada
[U-Boot] [PATCH v3 0/6] Second step towards Kbuild: Descend down like Kbuild Masahiro Yamada
[U-Boot] Lots of SPDX-License Identifer have a trailing space Masahiro Yamada
[U-Boot] [PATCH] ARM: align MVBAR on 32 byte boundary Masahiro Yamada
[U-Boot] [PATCH] Makefile: do not create a symbolic link to arch/${ARCH}/include/asm Masahiro Yamada
[U-Boot] [PATCH] include: delete include/linux/config.h Masahiro Yamada
[U-Boot] [PATCH] ARM: align MVBAR on 32 byte boundary Masahiro Yamada
[U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs Masahiro Yamada
[U-Boot] SPDX License IDs - moving forward Masahiro Yamada
[U-Boot] sandbox is broken Masahiro Yamada
[U-Boot] Suggestion for building all boards Masahiro Yamada
[U-Boot] [PATCH v2] config.mk: disable -fstack-usage for blackfin and m68k Masahiro Yamada
[U-Boot] [PATCH v3] config.mk: fix -fstack-usage support test Masahiro Yamada
[U-Boot] [PATCH v2] config.mk: disable -fstack-usage for blackfin and m68k Masahiro Yamada
[U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired Masahiro Yamada
[U-Boot] [PATCH v3] config.mk: fix -fstack-usage support test Masahiro Yamada
[U-Boot] [PATCH v4] config.mk: fix -fstack-usage support test Masahiro Yamada
[U-Boot] [PATCH 0/3] All M68K boards are broken Masahiro Yamada
[U-Boot] [PATCH 1/3] i2c: eliminate warnings in i2c_reloc_fixup function Masahiro Yamada
[U-Boot] [PATCH 2/3] m68k: eliminate warnings in do_bootm_linux function Masahiro Yamada
[U-Boot] [PATCH 3/3] m68k: eliminate a warning in cpu_init Masahiro Yamada
[U-Boot] [PATCH 0/3] All M68K boards are broken Masahiro Yamada
[U-Boot] [PATCH 0/3] All M68K boards are broken Masahiro Yamada
[U-Boot] Is EP88x board dead or not? Masahiro Yamada
[U-Boot] Is EP88x board dead or not? Masahiro Yamada
[U-Boot] [PATCH 0/3] Fix bugs of MAKEALL Masahiro Yamada
[U-Boot] [PATCH 1/3] MAKEALL: fix awk warning message Masahiro Yamada
[U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH> Masahiro Yamada
[U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function Masahiro Yamada
[U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles Masahiro Yamada
[U-Boot] [PATCH v3 01/19] Makefile: prepare for using Kbuild-style Makefile Masahiro Yamada
[U-Boot] [PATCH v3 02/19] armv7: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 03/19] arm926ejs: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 04/19] arm920t: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 05/19] arm720t: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 06/19] ARM: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 07/19] ARM: imx-common: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 08/19] drivers: net: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 09/19] drivers: mtd: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 10/19] drivers: usb: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 11/19] drivers: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 12/19] fs: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 13/19] common: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 14/19] net: convert a makefile to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 15/19] lib: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 16/19] disk: convert a makefile to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 17/19] sandbox: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 18/19] powerpc: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH v3 19/19] board: ti: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH> Masahiro Yamada
[U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function Masahiro Yamada
[U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH> Masahiro Yamada
[U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function Masahiro Yamada
[U-Boot] [PATCH v4 0/6] Second step towards Kbuild: Descend down like Kbuild Masahiro Yamada
[U-Boot] [PATCH v4 1/6] Makefile: support descending down to subdirectories Masahiro Yamada
[U-Boot] [PATCH v4 2/6] drivers: move some drivers to drivers/Makefile Masahiro Yamada
[U-Boot] [PATCH v4 3/6] fs: move some file system to fs/Makefile Masahiro Yamada
[U-Boot] [PATCH v4 4/6] ARM: tegra: move Tegra specific code under arch/arm/ Masahiro Yamada
[U-Boot] [PATCH v4 5/6] ARM: omap: move OMAP specific code under arch/arm/ Masahiro Yamada
[U-Boot] [PATCH v4 6/6] ARM: s5pc, exynos: move Samsung ARM SoC specific code under arch/arm/ Masahiro Yamada
[U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles Masahiro Yamada
[U-Boot] [PATCH v4 3/6] fs: move some file system to fs/Makefile Masahiro Yamada
[U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function Masahiro Yamada
[U-Boot] Is EP88x board dead or not? Masahiro Yamada
[U-Boot] [PATCH] kup: Delete an unused Makefile Masahiro Yamada
[U-Boot] [PATCH 0/2] EP88x: delete remainders of dead board Masahiro Yamada
[U-Boot] [PATCH 1/2] README.scrapyard: fix broken format Masahiro Yamada
[U-Boot] [PATCH 2/2] EP88x: remove remainders of dead board Masahiro Yamada
[U-Boot] [PATCH 0/2] blackfin: fix warnings Masahiro Yamada
[U-Boot] [PATCH 1/2] blackfin: fix a warning in arch/blackfin/cpu/initcode.c Masahiro Yamada
[U-Boot] [PATCH 2/2] blackfin: fix a warning in arch/blackfin/cpu/cpu.c Masahiro Yamada
[U-Boot] [PATCH] sparc: include config.h to start.S Masahiro Yamada
[U-Boot] [PATCH v2 0/4] Fix bugs of MAKEALL Masahiro Yamada
[U-Boot] [PATCH v2 1/4] MAKEALL: fix awk warning message Masahiro Yamada
[U-Boot] [PATCH v2 2/4] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH> Masahiro Yamada
[U-Boot] [PATCH v2 3/4] MAKEALL: fix boards_by_field function Masahiro Yamada
[U-Boot] [PATCH v2 4/4] MAKEALL: rename boards_by_* functions to targets_by_* Masahiro Yamada
[U-Boot] [PATCH 00/18] Third step towards Kbuild: Convert rest of makefiles Masahiro Yamada
[U-Boot] [PATCH 01/18] sparc: fix a link error Masahiro Yamada
[U-Boot] [PATCH 02/18] sh: Do not include start.o in lib$(CPU).o Masahiro Yamada
[U-Boot] [PATCH 03/18] sparc: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 04/18] sh: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 05/18] avr32: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 06/18] openrisc: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 07/18] microblaze: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 08/18] mips: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 09/18] nds32: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 10/18] nios2: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 11/18] x86: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 12/18] m68k: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 13/18] blackfin: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 14/18] board: arm: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 15/18] board: powerpc: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 16/18] post: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 17/18] dts, api, test: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 18/18] Makefile: convert makefiles to Kbuild style and delete grep switch Masahiro Yamada
[U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile Masahiro Yamada
[U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function Masahiro Yamada
[U-Boot] [PATCH 13/18] blackfin: convert makefiles to Kbuild style Masahiro Yamada
[U-Boot] [PATCH 1/2] blackfin: fix a warning in arch/blackfin/cpu/initcode.c Masahiro Yamada
[U-Boot] Question about patman Masahiro Yamada
[U-Boot] Should be Acked-by and Reviewed-by inherited for updated patches? Masahiro Yamada
[U-Boot] [PATCH] mpc85xx: Fix the offset of register address error Tang Yuantian-B29983
[U-Boot] [PATCH] mpc85xx: Fix the offset of register address error Tang Yuantian-B29983
[U-Boot] [PATCH v5] usb: new board-specific USB init interface Mateusz Zalega
[U-Boot] [PATCH v6] usb: new board-specific USB init interface Mateusz Zalega
[U-Boot] [PATCH v6] usb: new board-specific USB init interface Mateusz Zalega
[U-Boot] [PATCH v4 1/2] arm:goni: Update configuration for goni target Mateusz Zalega
[U-Boot] [PATCH v4 2/2] arm:goni:dfu Add support for DFU at GONI target Mateusz Zalega
[U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation. Mateusz Zalega
[U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting Haijun Zhang
[U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Haijun Zhang
[U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit Haijun Zhang
[U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Haijun Zhang
[U-Boot] [PATCH 2/2 V2] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register Haijun Zhang
[U-Boot] [PATCH] powerpc/esdhc: Map register for eSDHC host controller 3.0 Haijun Zhang
[U-Boot] [PATCH] powerpc/esdhc: Map register for eSDHC host controller 3.0 Haijun Zhang
[U-Boot] [PATCH 1/2 V2] esdhc: memset mmc struct before putting into use Haijun Zhang
[U-Boot] [PATCH 2/2 V2] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register Haijun Zhang
[U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0 Haijun Zhang
[U-Boot] [PATCH 2/2 V2] Powerpc/esdhc: Add simple description of esdhc register Haijun Zhang
[U-Boot] [PATCH 1/2 V3] esdhc: memset mmc struct before putting into use Haijun Zhang
[U-Boot] [PATCH 2/2 V3] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register Haijun Zhang
[U-Boot] [PATCH 1/2] blackfin: fix a warning in arch/blackfin/cpu/initcode.c Sonic Zhang
[U-Boot] [PATCH 2/2] blackfin: fix a warning in arch/blackfin/cpu/cpu.c Sonic Zhang
[U-Boot] [PATCH 13/18] blackfin: convert makefiles to Kbuild style Sonic Zhang
[U-Boot] [PATCH] blackfin: Move machine specific gpio_port_t structure back to blackfin arch folder. Sonic Zhang
[U-Boot] [PATCH] Enable the DIU for P1022DS board. Jin Zhengxiong-R64188
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Detlev Zundel
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Detlev Zundel
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013 Detlev Zundel
[U-Boot] Final talk schedule for U-Boot mini summit and collection of discussion topics Detlev Zundel
[U-Boot] Minutes from the U-Boot Mini Summit 2013 Detlev Zundel
[U-Boot] Bad Linux ARM zImage magic claus anders
[U-Boot] SPL: Reading large files with file_fat_read() bin4ry
[U-Boot] [U-boot] SPL: Reading large files with file_fat_read() bin4ry
[U-Boot] Dynamically define which Kernel image to boot during SPL execution bin4ry
[U-Boot] LCD LVDS support in u-boot to display splash screen on OMAP4460 bin4ry
[U-Boot] pxe incompatibility with x86 rob.herring at calxeda.com
[U-Boot] How/Where does "_start" get assigned a value ? djoker
[U-Boot] How/Where does "_start" get assigned a value ? djoker
[U-Boot] [PATCH v2] mpc85xx: Fix the offset of register address error Yuantian.Tang at freescale.com
[U-Boot] u-boot and Linux hanle ubifs ecc in different way on beaglebon variant board matti kaasinen
[U-Boot] u-boot hw assisted BCH8 not compatible with am335x architecure matti kaasinen
[U-Boot] u-boot hw assisted BCH8 not compatible with am335x architecure matti kaasinen
[U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel Ajay kumar
[U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux Ajay kumar
[U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux Ajay kumar
[U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel Ajay kumar
[U-Boot] [PATCH 0/6] [U-boot] SMDK5420: Add support for FIMD and DP Ajay kumar
[U-Boot] [PATCH 0/6] [U-boot] SMDK5420: Add support for FIMD and DP Ajay kumar
[U-Boot] [PATCH 1/6] exynos_fb: Remove usage of static defines Ajay kumar
[U-Boot] [PATCH 2/6] arm: exynos: Add RPLL for Exynos5420 Ajay kumar
[U-Boot] [PATCH 3/6] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420 Ajay kumar
[U-Boot] [PATCH 4/6] video: exynos_fimd: Add framework to disable FIMD sysmmu Ajay kumar
[U-Boot] [PATCH 5/6] smdk5420: Implement callbacks needed by exynos_fb driver Ajay kumar
[U-Boot] [PATCH 6/6] CONFIG: SMDK5420: Enable FIMD and DP Ajay kumar
[U-Boot] Fwd: [PATCH 1/6] exynos_fb: Remove usage of static defines Ajay kumar
[U-Boot] help on adding bootelf to u-boot myan
[U-Boot] help on adding bootelf to u-boot myan
[U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks myan
[U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed oller
[U-Boot] [PATCH v14 00/10] arm64 patch fenghua at phytium.com.cn
[U-Boot] [PATCH v14 01/10] fdt_support: 64bit initrd start address support fenghua at phytium.com.cn
[U-Boot] [PATCH v14 02/10] cmd_pxe: remove compiling warnings fenghua at phytium.com.cn
[U-Boot] [PATCH v14 03/10] add weak entry definition fenghua at phytium.com.cn
[U-Boot] [PATCH v14 04/10] arm64: Add tool to statically apply RELA relocations fenghua at phytium.com.cn
[U-Boot] [PATCH v14 05/10] arm64: Turn u-boot.bin back into an ELF file after relocate-rela fenghua at phytium.com.cn
[U-Boot] [PATCH v14 06/10] arm64: Make checkarmreloc accept arm64 relocations fenghua at phytium.com.cn
[U-Boot] [PATCH v14 07/10] arm64: core support fenghua at phytium.com.cn
[U-Boot] [PATCH v14 08/10] arm64: generic board support fenghua at phytium.com.cn
[U-Boot] [PATCH v14 09/10] arm64: board support of vexpress_aemv8a fenghua at phytium.com.cn
[U-Boot] [PATCH v14 10/10] arm64: MAKEALL, filter armv8 boards from LIST_arm fenghua at phytium.com.cn
[U-Boot] [PATCH v14 09/10] arm64: board support of vexpress_aemv8a fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 00/10] arm64 pat fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 01/10] fdt_support: 64bit initrd start address support fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 02/10] cmd_pxe: remove compiling warnings fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 03/10] add weak entry definition fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 04/10] arm64: Add tool to statically apply RELA relocations fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 05/10] arm64: Turn u-boot.bin back into an ELF file after relocate-rela fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 06/10] arm64: Make checkarmreloc accept arm64 relocations fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 07/10] arm64: core support fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 08/10] arm64: generic board support fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 09/10] arm64: board support of vexpress_aemv8a fenghua at phytium.com.cn
[U-Boot] [RESEND PATCH v14 10/10] arm64: MAKEALL, filter armv8 boards from LIST_arm fenghua at phytium.com.cn
[U-Boot] Dual boot Images in Flash pshambhu
[U-Boot] Dual boot Images in Flash pshambhu
[U-Boot] Dual boot Images in Flash pshambhu
[U-Boot] fw_setenv device not accessible pshambhu
[U-Boot] Can a standalone application send data via Ethernet in U-Boot? rvijay435
[U-Boot] Can a standalone application send data via Ethernet in U-Boot? rvijay435
[U-Boot] Can a standalone application send data via Ethernet in U-Boot? rvijay435
[U-Boot] [PATCH v2] arm: ep9315: Return back Cirrus Logic EDB9315A board support sergey.kostanbaev
[U-Boot] Festival Shutdown : U-Boot Digest, Vol 65, Issue 50 hemal.patel at slscorp.com
[U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state TigerLiu at viatech.com.cn
[U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state TigerLiu at viatech.com.cn
[U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state TigerLiu at viatech.com.cn
[U-Boot] [U-boot] getstr() function? TigerLiu at viatech.com.cn
[U-Boot] [U-boot] DFU and fastboot question TigerLiu at viatech.com.cn
[U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit sun york-R58495
[U-Boot] [PATCH] powerpc/t1040qds: Add DDR Raw Timing support sun york-R58495
[U-Boot] Freescale P4080 DDR problems Виталий Андрющенко

Last message date: Thu Oct 31 23:43:10 CET 2013
Archived on: Mon Dec 2 12:10:29 CET 2013

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).