[U-Boot] [PATCH v7 0/2] I2C: Zynq

[Michael Burr]

This series of two patches contains improvements for the I2C driver on the
Xilinx Zynq architecture. In general, the goals are:
> Support for both I2C bus masters ("I2C0" and "I2C1") in the Zynq PS.
> Full support for bus multiplexers.
> Support for all register-address sizes (0, 1, 2).

The changes to file 'zynq_i2c.c' in this patch series are
meant to be applied in order: in other words, first apply the
changes from the PATCH 1/2 version; then apply the changes in the
PATCH 2/2 version.

v3: fixed mistake parsing PATCH 1/2
v4: _really_ fixed this time!
v5: yet another try
v6: one more time
v7: again

Michael Burr (2):
   I2C: Zynq: Support for 0-length register address
   I2C:Zynq: Adapt this driver to the new model

  README                 |    9 +++
  drivers/i2c/Makefile   |    2 +-
  drivers/i2c/zynq_i2c.c |  147 
+++++++++++++++++++++++++++++-------------------
  include/configs/zynq.h |   10 ++--
  4 files changed, 102 insertions(+), 66 deletions(-)

-- 
1.7.9.5