[U-Boot] [UBOOT][PATCHv6 1/6] omap5: add qspi support

Sourav Poddar sourav.poddar at ti.com
Mon Oct 7 12:22:59 CEST 2013


From: Matt Porter <matt.porter at linaro.org>

Add QSPI definitions and clock configuration support.

Signed-off-by: Matt Porter <matt.porter at linaro.org>
Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
---
 arch/arm/cpu/armv7/omap5/hw_data.c     |    8 ++++++++
 arch/arm/cpu/armv7/omap5/prcm-regs.c   |    1 +
 arch/arm/include/asm/arch-omap5/omap.h |    3 +++
 arch/arm/include/asm/arch-omap5/spl.h  |    1 +
 arch/arm/include/asm/omap_common.h     |    1 +
 5 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index fbbc486..c00bfb8 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -426,6 +426,10 @@ void enable_basic_clocks(void)
 #ifdef CONFIG_DRIVER_TI_CPSW
 		(*prcm)->cm_gmac_gmac_clkctrl,
 #endif
+
+#ifdef CONFIG_TI_QSPI
+		(*prcm)->cm_l4per_qspi_clkctrl,
+#endif
 		0
 	};
 
@@ -454,6 +458,10 @@ void enable_basic_clocks(void)
 			 clk_modules_explicit_en_essential,
 			 1);
 
+#ifdef CONFIG_TI_QSPI
+	setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
+#endif
+
 	/* Enable SCRM OPT clocks for PER and CORE dpll */
 	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
 			OPTFCLKEN_SCRM_PER_MASK);
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 579818d..0b1bb46 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -933,6 +933,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_l4per_gpio8_clkctrl			= 0x4a009818,
 	.cm_l4per_mmcsd3_clkctrl		= 0x4a009820,
 	.cm_l4per_mmcsd4_clkctrl		= 0x4a009828,
+	.cm_l4per_qspi_clkctrl			= 0x4a009838,
 	.cm_l4per_uart1_clkctrl			= 0x4a009840,
 	.cm_l4per_uart2_clkctrl			= 0x4a009848,
 	.cm_l4per_uart3_clkctrl			= 0x4a009850,
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index e9a51d3..414d37a 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -61,6 +61,9 @@
 /* GPMC */
 #define OMAP54XX_GPMC_BASE	0x50000000
 
+/* QSPI */
+#define QSPI_BASE		0x4B300000
+
 /*
  * Hardware Register Details
  */
diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
index fe8b0c0..57f0de5 100644
--- a/arch/arm/include/asm/arch-omap5/spl.h
+++ b/arch/arm/include/asm/arch-omap5/spl.h
@@ -15,6 +15,7 @@
 #define BOOT_DEVICE_MMC1        5
 #define BOOT_DEVICE_MMC2        6
 #define BOOT_DEVICE_MMC2_2	7
+#define BOOT_DEVICE_SPI		10
 
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2_2
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 5e2f027..f865c14 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -266,6 +266,7 @@ struct prcm_regs {
 	u32 cm_l4per_mmcsd4_clkctrl;
 	u32 cm_l4per_msprohg_clkctrl;
 	u32 cm_l4per_slimbus2_clkctrl;
+	u32 cm_l4per_qspi_clkctrl;
 	u32 cm_l4per_uart1_clkctrl;
 	u32 cm_l4per_uart2_clkctrl;
 	u32 cm_l4per_uart3_clkctrl;
-- 
1.7.1



More information about the U-Boot mailing list