[U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting

[Haijun Zhang]

When Auto-CMD12 is used, the corresponding interrupt and error bit
should be enabled and set to reflect auto cmd 12 error.
Also add other command error detecting, like command index error,
CRC error etc. Without this command error bit set system will hang
due to the while loop.

Signed-off-by: Haijun Zhang <Haijun.Zhang at freescale.com>
---
 drivers/mmc/fsl_esdhc.c | 10 +++++-----
 include/fsl_esdhc.h     |  3 ++-
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index dc1d002..5aa592b 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -342,13 +342,13 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 #endif
 
 	/* Wait for the command to complete */
-	while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
+	while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | CMD_ERR)))
 		;
 
 	irqstat = esdhc_read32(&regs->irqstat);
 
 	/* Reset CMD and DATA portions on error */
-	if (irqstat & (CMD_ERR | IRQSTAT_CTOE)) {
+	if (irqstat & CMD_ERR) {
 		esdhc_write32(&regs->sysctl, esdhc_read32(&regs->sysctl) |
 			      SYSCTL_RSTC);
 		while (esdhc_read32(&regs->sysctl) & SYSCTL_RSTC)
@@ -363,12 +363,12 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 		}
 	}
 
-	if (irqstat & CMD_ERR)
-		return COMM_ERR;
-
 	if (irqstat & IRQSTAT_CTOE)
 		return TIMEOUT;
 
+	if (irqstat & CMD_ERR)
+		return COMM_ERR;
+
 	/* Workaround for ESDHC errata ENGcm03648 */
 	if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
 		int timeout = 2500;
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 67d6057..37dbe27 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -62,7 +62,8 @@
 #define IRQSTAT_TC		(0x00000002)
 #define IRQSTAT_CC		(0x00000001)
 
-#define CMD_ERR		(IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE)
+#define CMD_ERR		(IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE | \
+				IRQSTAT_CTOE | IRQSTAT_AC12E)
 #define DATA_ERR	(IRQSTAT_DEBE | IRQSTAT_DCE | IRQSTAT_DTOE | \
 				IRQSTAT_DMAE)
 #define DATA_COMPLETE	(IRQSTAT_TC | IRQSTAT_DINT)
-- 
1.8.0