[U-Boot] [PATCH 4/5] mtd: atmel_nand: don't print bit correction message in driver

[Josh Wu]

Since for some MLC nand, bit errors happened too often. Just disable it
to avoid noise

Signed-off-by: Josh Wu <josh.wu at atmel.com>
---
 drivers/mtd/nand/atmel_nand.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 2320afe..ca2acaf 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -452,7 +452,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			*(buf + byte_pos) ^= (1 << bit_pos);
 
 			pos = sector_num * host->pmecc_sector_size + byte_pos;
-			printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+			dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, *(buf + byte_pos));
 		} else {
 			/* Bit flip in OOB area */
@@ -462,7 +462,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			ecc[tmp] ^= (1 << bit_pos);
 
 			pos = tmp + nand_chip->ecc.layout->eccpos[0];
-			printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+			dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, ecc[tmp]);
 		}
 
-- 
1.7.9.5