[U-Boot] [PATCH V6 00/10] Make mv_udc work for i.mx6

[Marek Vasut]

Dear Troy Kisky,

> Hi Marek
> 
> This series is based on u-boot-usb/next branch.
> After this series, nitrogen6x works with tftpboot to transfer
> files over usb, and will recognize a usb stick in the OTG port.
> 
> 
> This V6 has been rebased to the latest u-boot-usb/next branch
> and changed to address Marek comments.
> 
> The most noticeable change is the addition of patches to use
> enum usb_init_type.
> 
> Tested on a Nitrogen6x board with the following commands when
> connected to a USB2.0 hub and a USB1.1 hub
> 
> setenv ipaddr 10.0.0.2 && setenv netmask 255.255.255.0 && setenv serverip
> 10.0.0.1 setenv usbnet_devaddr 00:11:22:33:44:55 && setenv usbnet_hostaddr
> 00:aa:bb:cc:dd:ee setenv ethprime usb_ether && setenv ethact usb_ether &&
> setenv ncip 10.0.0.1 tftpboot 10800000 10.0.0.1:uImage6w
> 
> The USB1.1 had a transfer rate of 687.5 KiB/s, the USB2.0 hub had
> a transfer rate of 5.4 MiB/s.
> 
> And by recognizing a usb stick in each port.

Applied all, thanks.

Best regards,
Marek Vasut