[U-Boot] [PATCH v8 0/2] I2C: Zynq

[Heiko Schocher]

Hello Jagan,

Am 17.10.2013 12:43, schrieb Jagan Teki:
> Hi Michael,
>
> On Wed, Oct 16, 2013 at 1:28 PM, Heiko Schocher<hs at denx.de>  wrote:
>> Hello Michael,
>>
>> Am 15.10.2013 22:23, schrieb Michael Burr:
>>
>>> This series of two patches contains improvements for the I2C driver on the
>>> Xilinx Zynq architecture. In general, the goals are:
>>>>
>>>> Support for both I2C bus masters ("I2C0" and "I2C1") in the Zynq PS.
>>>> Full support for bus multiplexers.
>>>> Support for all register-address sizes (0, 1, 2).
>>>
>>>
>>> The changes to file 'zynq_i2c.c' in this patch series are
>>> meant to be applied in order: in other words, first apply the
>>> changes from the PATCH 1/2 version; then apply the changes in the
>>> PATCH 2/2 version.
>>>
>>> v3: fixed mistake parsing PATCH 1/2
>>> v4: _really_ fixed this time!
>>> v5: yet another try
>>> v6: one more time
>>> v7: again
>>> v8: last time (see comments in PATCH 1/2)
>>
>>
>> ? I am lost in space now ... you are sure this is the finally version?
>> Really tested? I have no chance to test your changes ...
>
> Just confused this style of sending patches.
> Anyway I have tested on these on zynq boards, works fine.

Thanks for testing!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany