[U-Boot] [PATCH v8 0/2] I2C: Zynq

[Jagan Teki]

Hi Michael,

On Wed, Oct 16, 2013 at 1:28 PM, Heiko Schocher <hs at denx.de> wrote:
> Hello Michael,
>
> Am 15.10.2013 22:23, schrieb Michael Burr:
>
>> This series of two patches contains improvements for the I2C driver on the
>> Xilinx Zynq architecture. In general, the goals are:
>>>
>>> Support for both I2C bus masters ("I2C0" and "I2C1") in the Zynq PS.
>>> Full support for bus multiplexers.
>>> Support for all register-address sizes (0, 1, 2).
>>
>>
>> The changes to file 'zynq_i2c.c' in this patch series are
>> meant to be applied in order: in other words, first apply the
>> changes from the PATCH 1/2 version; then apply the changes in the
>> PATCH 2/2 version.
>>
>> v3: fixed mistake parsing PATCH 1/2
>> v4: _really_ fixed this time!
>> v5: yet another try
>> v6: one more time
>> v7: again
>> v8: last time (see comments in PATCH 1/2)
>
>
> ? I am lost in space now ... you are sure this is the finally version?
> Really tested? I have no chance to test your changes ...

Just confused this style of sending patches.
Anyway I have tested on these on zynq boards, works fine.

Any possibility to send these patches with next patch version so-that
I will mark t-o-b.

-- 
Thanks,
Jagan.
--------
Jagannadha Sutradharudu Teki,
E: jagannadh.teki at gmail.com, P: +91-9676773388
Engineer - System Software Hacker
U-boot - SPI Custodian and Zynq APSOC
Ln: http://www.linkedin.com/in/jaganteki