[U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support.

Sourav Poddar sourav.poddar at ti.com
Mon Oct 7 17:17:19 CEST 2013


On Monday 07 October 2013 08:01 PM, Jagan Teki wrote:
> On Mon, Oct 7, 2013 at 3:52 PM, Sourav Poddar<sourav.poddar at ti.com>  wrote:
>> This patch series add support for TI qspi controller and in the process also
>> add support for quad read and memory mapped read
>> in mtd spi framework.
>>
>> Testing details:
>> Did a boot from qspi mode on DRA7xx.
>> Testing details present in the last patch of
>> the series.
>>
>> Currently, TI qpsi controller supports only 16MB access.
>> Access for higher MB area will be added later.
>>
>> Patches are available at:
>> git://gitorious.org/u-boot-shared/u-boot-qspi.git qspi_v7
>>
>> Matt Porter (3):
>>    omap5: add qspi support
>>    spi: add TI QSPI driver
>>    dra7xx_evm: add SPL API, QSPI, and serial flash support
>>
>> Sourav Poddar (3):
>>    armv7: hw_data: change clock divider setting.
>>    sf: Add memory mapped read support
>>    README: qspi usecase and testing documentation.
>>
>>   arch/arm/cpu/armv7/omap5/hw_data.c     |   10 +-
>>   arch/arm/cpu/armv7/omap5/prcm-regs.c   |    1 +
>>   arch/arm/include/asm/arch-omap5/omap.h |    3 +
>>   arch/arm/include/asm/arch-omap5/spl.h  |    1 +
>>   arch/arm/include/asm/omap_common.h     |    1 +
>>   board/ti/dra7xx/mux_data.h             |   10 +
>>   doc/SPI/README.ti_qspi_dra_test        |   48 +++++
>>   doc/SPI/README.ti_qspi_flash           |   47 +++++
>>   drivers/mtd/spi/sf_ops.c               |    2 +
>>   drivers/mtd/spi/sf_probe.c             |    1 +
>>   drivers/spi/Makefile                   |    1 +
>>   drivers/spi/ti_qspi.c                  |  311 ++++++++++++++++++++++++++++++++
>>   include/configs/dra7xx_evm.h           |   19 ++
>>   include/spi.h                          |    3 +
>>   14 files changed, 457 insertions(+), 1 deletions(-)
>>   create mode 100644 doc/SPI/README.ti_qspi_dra_test
>>   create mode 100644 doc/SPI/README.ti_qspi_flash
>>   create mode 100644 drivers/spi/ti_qspi.c
>>
> Applied to u-boot-spi/master
>
Thanks!


More information about the U-Boot mailing list