[U-Boot] [PATCH 2/2 V2] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register

[Scott Wood]

On Wed, 2013-10-30 at 11:36 +0800, Haijun Zhang wrote:
> T4240QDS eSDHC host capabilities reigster should have VS33 bit define.
> Add quirk CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 to deal with capacity
> missing
> 
> Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
> Signed-off-by: Haijun Zhang <Haijun.Zhang at freescale.com>
> ---
> changes for V2:
> 	- Limited the change to T4240QDS only
> 
>  arch/powerpc/include/asm/config_mpc85xx.h | 3 +++
>  drivers/mmc/fsl_esdhc.c                   | 6 ++++++
>  2 files changed, 9 insertions(+)
> 
> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
> index 946ea97..2f54aeb 100644
> --- a/arch/powerpc/include/asm/config_mpc85xx.h
> +++ b/arch/powerpc/include/asm/config_mpc85xx.h
> @@ -557,6 +557,9 @@
>  #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
>  #define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
>  #ifdef CONFIG_PPC_T4240
> +#ifdef CONFIG_T4240QDS
> +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
> +#endif

This is not the place for board specific things.

-Scott