[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.

[Martin Fuzzey]

On 16/10/13 15:22, Jagan Teki wrote:
> Hi Albert,
>
> On Wed, Oct 16, 2013 at 5:35 PM, Albert ARIBAUD
> <albert.u.boot at aribaud.net> wrote:
>> Hi Jagan,
>>
>> On Wed, 16 Oct 2013 16:20:17 +0530, Jagan Teki
>> <jagannadh.teki at gmail.com> wrote:
>>
>>> Hi Amicalement,
>>>
>>> On Wed, Oct 16, 2013 at 1:05 PM, Albert ARIBAUD
>>> <albert.u.boot at aribaud.net> wrote:
>>>> Hi Jagan,
>>>>
>>>> On Wed, 16 Oct 2013 11:16:49 +0530, Jagan Teki
>>>> <jagannadh.teki at gmail.com> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> On Tue, Oct 15, 2013 at 11:27 PM, Martin Fuzzey <mfuzzey at parkeon.com> wrote:
>>>>>> When writing buffers that are not 32 bit aligned data loss occurs.
>>>>>>
>>>>>> This can also occur when the total transfer size is not a multiple of 4 bytes
>>>>>> since the extra bytes are written first causing the rest to be unaligned.
>>>>>>
>>>>>> This can be seen by writing to SPI flash a 57 byte file containing 00 01 .. 38:
>>>>>>
>>>>>> U-Boot > dhcp data.bin
>>>>>> ...
>>>>>> Bytes transferred = 57 (39 hex)
>>>>>> U-Boot > md.b $loadaddr
>>>>>> 72000000: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f    ................
>>>>>> 72000010: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f    ................
>>>>>> 72000020: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f     !"#$%&'()*+,-./
>>>>>> 72000030: 30 31 32 33 34 35 36 37 38 ff ff ff ff ff ff ff    012345678.......
>>>>>> U-Boot > sf write $loadaddr 0 $filesize
>>>>>>
>>>>>> U-Boot > mw.b $loadaddr ff 100
>>>>>> U-Boot > sf read $loadaddr 0 100
>>>>>> U-Boot > md.b $loadaddr
>>>>>> 72000000: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f    ................
>>>>>> 72000010: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f    ................
>>>>>> 72000020: 20 21 22 23 24 29 2a 2b 2c 31 32 33 34 ff ff ff     !"#$)*+,1234...
>>>>>> 72000030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
>>>>>>
>>>>>> [bytes 25-28, 2d-30, 35-38 are missing]
>>>>>>
>>>>>> Activating debug in the write command gave:
>>>>>> spi_xchg_single: bitlen 256 dout 0x72000000 din 0x0
>>>>>> Sending SPI 0x10203
>>>>>> Sending SPI 0x4050607
>>>>>> Sending SPI 0x8090a0b
>>>>>> Sending SPI 0xc0d0e0f
>>>>>> Sending SPI 0x10111213
>>>>>> Sending SPI 0x14151617
>>>>>> Sending SPI 0x18191a1b
>>>>>> Sending SPI 0x1c1d1e1f
>>>>>> SPI Rx: 0xffffffff 0xffffffff
>>>>>> ...
>>>>>> SPI Rx: 0xffffffff 0xffffffff
>>>>>> spi_xchg_single: bitlen 200 dout 0x72000020 din 0x0
>>>>>> Sending SPI 0x20
>>>>>> Sending SPI 0x21222324
>>>>>> Sending SPI 0x292a2b2c  <===  What happened to 25262728?
>>>>>> Sending SPI 0x31323334
>>>>>> Sending SPI 0xffffffff
>>>>>> ...
>>>>>> SF: program success 57 bytes @ 0x0
>>>>> Thanks for your log, for showing the exact issues.
>>>> Agreed, but I think this log could go in a comment below the '---'
>>>> line, so that the commit message focuses on describing what the patch
>>>> does, rather than how it was found out necessary.
>>> I too thought the same, but the commit is already in master, any
>>> possibility to alter?
>> Er... Martin's patch is already in patchwork as 283794, but its state
>> is still "New" with no delegate, and I don't see it in any of the
>> repos I usually read, nor does it appear on u-boot-spi. Where do you
>> see it "in master" exactly?
>>
>> Besides, it is less than 24 hours old; this is not enough time for
>> review, and therefore, it should not be accepted yet.
> I got the similar patch from Timo Herbrecher  couple of weeks back,
> I just reviewed and sent back to v3 before apllied on u-boot-spi.
>
> Yesterday I sent this patch as part of spi PR.
>
> You can find the patch in master:
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=6d5ce1bd0048617d48c05de1a84fae8696081127
>
> Please let me know you still have any concerns, I agreed your concern
> that the commit message
> have enough info for this fix. But right know i think we can't do as
> it's part of master.
>
> If any possibility to alter the commit msg, please let me know.
>
Yes looks like two patches doing the same thing.
The one in master is from Timo Herbrecher not me.

I checked git master before sending my patch and it wasn't there yet but
didin't check the mailing list archives.

Anyway the code is identical just the commit message changes.

Cheers,
Martin