[U-Boot] [PATCH 1/2] powerpc: spiflash:Add corenet devices support in eSPI SPL

[Priyanka Jain]

Existing eSPI SPL framework assumes booting from spi-image
with boot_format header which contains final u-boot Image
offset and size. No such header is present in case of
corenet devices like T1040.

So, for corenet deives, SPL bootloader use values provided
at compilation time. These values can be defined in board
specific config file.

Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
---
 drivers/mtd/spi/fsl_espi_spl.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c
index 6263d8c..e5ac79b 100644
--- a/drivers/mtd/spi/fsl_espi_spl.c
+++ b/drivers/mtd/spi/fsl_espi_spl.c
@@ -31,6 +31,10 @@ void spi_boot(void)
 		hang();
 	}
 
+#ifdef CONFIG_FSL_CORENET
+	offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+	code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE;
+#else
 	/*
 	* Load U-Boot image from SPI flash into RAM
 	*/
@@ -50,6 +54,7 @@ void spi_boot(void)
 	code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
 	/* Skip spl code */
 	code_len = code_len - CONFIG_SPL_MAX_SIZE;
+#endif
 	/* copy code to DDR */
 	spi_flash_read(flash, offset, code_len,
 		       (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_DST);
-- 
1.7.4.1