[U-Boot] [PATCH v1 4/5] usb, g_dnl: make bcdDevice value configurable

[Lukasz Majewski]

Hi Heiko,

> add the possibility to set the bcdDevice number board specific.
> Therefore the weak function g_dnl_get_board_bcd_device_number()
> is introduced. Used on the siemens boards.

Acked-by: Lukasz Majewski <l.majewski at samsung.com>

> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> Cc: Marek Vasut <marek.vasut at gmail.com>
> Cc: Lukasz Majewski <l.majewski at samsung.com>
> Cc: Kyungmin Park <kyungmin.park at samsung.com>
> ---
>  drivers/usb/gadget/g_dnl.c | 23 +++++++++++++++++++----
>  1 file changed, 19 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
> index 5f09d66..942920e 100644
> --- a/drivers/usb/gadget/g_dnl.c
> +++ b/drivers/usb/gadget/g_dnl.c
> @@ -142,6 +142,23 @@ int g_dnl_bind_fixup(struct
> usb_device_descriptor *dev) return 0;
>  }
>  
> +__weak int g_dnl_get_board_bcd_device_number(int gcnum)
> +{
> +	return gcnum;
> +}
> +
> +static int g_dnl_get_bcd_device_number(struct usb_composite_dev
> *cdev) +{
> +	struct usb_gadget *gadget = cdev->gadget;
> +	int gcnum;
> +
> +	gcnum = usb_gadget_controller_number(gadget);
> +	if (gcnum > 0)
> +		gcnum += 0x200;
> +
> +	return g_dnl_get_board_bcd_device_number(gcnum);
> +}
> +
>  static int g_dnl_bind(struct usb_composite_dev *cdev)
>  {
>  	struct usb_gadget *gadget = cdev->gadget;
> @@ -178,11 +195,9 @@ static int g_dnl_bind(struct usb_composite_dev
> *cdev) if (ret)
>  		goto error;
>  
> -	gcnum = usb_gadget_controller_number(gadget);
> -
> -	debug("gcnum: %d\n", gcnum);
> +	gcnum = g_dnl_get_bcd_device_number(cdev);
>  	if (gcnum >= 0)
> -		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
> +		device_desc.bcdDevice = cpu_to_le16(gcnum);
>  	else {
>  		debug("%s: controller '%s' not recognized\n",
>  			shortname, gadget->name);



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group