[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.

[Jagan Teki]

Hi Amicalement,

On Wed, Oct 16, 2013 at 1:05 PM, Albert ARIBAUD
<albert.u.boot at aribaud.net> wrote:
> Hi Jagan,
>
> On Wed, 16 Oct 2013 11:16:49 +0530, Jagan Teki
> <jagannadh.teki at gmail.com> wrote:
>
>> Hi,
>>
>> On Tue, Oct 15, 2013 at 11:27 PM, Martin Fuzzey <mfuzzey at parkeon.com> wrote:
>> > When writing buffers that are not 32 bit aligned data loss occurs.
>> >
>> > This can also occur when the total transfer size is not a multiple of 4 bytes
>> > since the extra bytes are written first causing the rest to be unaligned.
>> >
>> > This can be seen by writing to SPI flash a 57 byte file containing 00 01 .. 38:
>> >
>> > U-Boot > dhcp data.bin
>> > ...
>> > Bytes transferred = 57 (39 hex)
>> > U-Boot > md.b $loadaddr
>> > 72000000: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f    ................
>> > 72000010: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f    ................
>> > 72000020: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f     !"#$%&'()*+,-./
>> > 72000030: 30 31 32 33 34 35 36 37 38 ff ff ff ff ff ff ff    012345678.......
>> > U-Boot > sf write $loadaddr 0 $filesize
>> >
>> > U-Boot > mw.b $loadaddr ff 100
>> > U-Boot > sf read $loadaddr 0 100
>> > U-Boot > md.b $loadaddr
>> > 72000000: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f    ................
>> > 72000010: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f    ................
>> > 72000020: 20 21 22 23 24 29 2a 2b 2c 31 32 33 34 ff ff ff     !"#$)*+,1234...
>> > 72000030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
>> >
>> > [bytes 25-28, 2d-30, 35-38 are missing]
>> >
>> > Activating debug in the write command gave:
>> > spi_xchg_single: bitlen 256 dout 0x72000000 din 0x0
>> > Sending SPI 0x10203
>> > Sending SPI 0x4050607
>> > Sending SPI 0x8090a0b
>> > Sending SPI 0xc0d0e0f
>> > Sending SPI 0x10111213
>> > Sending SPI 0x14151617
>> > Sending SPI 0x18191a1b
>> > Sending SPI 0x1c1d1e1f
>> > SPI Rx: 0xffffffff 0xffffffff
>> > ...
>> > SPI Rx: 0xffffffff 0xffffffff
>> > spi_xchg_single: bitlen 200 dout 0x72000020 din 0x0
>> > Sending SPI 0x20
>> > Sending SPI 0x21222324
>> > Sending SPI 0x292a2b2c  <===  What happened to 25262728?
>> > Sending SPI 0x31323334
>> > Sending SPI 0xffffffff
>> > ...
>> > SF: program success 57 bytes @ 0x0
>> Thanks for your log, for showing the exact issues.
>
> Agreed, but I think this log could go in a comment below the '---'
> line, so that the commit message focuses on describing what the patch
> does, rather than how it was found out necessary.

I too thought the same, but the commit is already in master, any
possibility to alter?

-- 
Thanks,
Jagan.
--------
Jagannadha Sutradharudu Teki,
E: jagannadh.teki at gmail.com, P: +91-9676773388
Engineer - System Software Hacker
U-boot - SPI Custodian and Zynq APSOC
Ln: http://www.linkedin.com/in/jaganteki