[U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework

[Heiko Schocher]

Hello Igor,

Am 27.10.2013 08:30, schrieb Igor Grinberg:
> Hi Heiko,
>
> On 10/22/13 11:03, Heiko Schocher wrote:
>> - add omap24xx driver to new multibus/multiadpater support
>> - adapted all config files, which uses this driver
>>
>> Tested on the am335x based siemens boards rut, dxr2 and pxm2
>> posted here:
>> http://patchwork.ozlabs.org/patch/263211/
>>
>> Signed-off-by: Heiko Schocher<hs at denx.de>
>> Tested-by: Tom Rini<trini at ti.com>
>> Cc: Lars Poeschel<poeschel at lemonage.de>
>> Cc: Steve Sakoman<sakoman at gmail.com>
>> Cc: Thomas Weber<weber at corscience.de>
>> Cc: Tom Rix<Tom.Rix at windriver.com>
>> Cc: Grazvydas Ignotas<notasas at gmail.com>
>> Cc: Enric Balletbo i Serra<eballetbo at iseebcn.com>
>> Cc: Luca Ceresoli<luca.ceresoli at comelit.it>
>> Cc: Igor Grinberg<grinberg at compulab.co.il>
>> Cc: Ilya Yanok<yanok at emcraft.com>
>> Cc: Stefano Babic<sbabic at denx.de>
>> Cc: Nishanth Menon<nm at ti.com>
>> Cc: Pali Rohár<pali.rohar at gmail.com>
>> Cc: Peter Barada<peter.barada at logicpd.com>
>> Cc: Nagendra T S<nagendra at mistralsolutions.com>
>> Cc: Michael Jones<michael.jones at matrix-vision.de>
>> Cc: Raphael Assenat<raph at 8d.com>
>
> [...]
[...]

>> diff --git a/board/compulab/cm_t35/eeprom.h b/board/compulab/cm_t35/eeprom.h
>> index 02ffbb1..a07559d 100644
>> --- a/board/compulab/cm_t35/eeprom.h
>> +++ b/board/compulab/cm_t35/eeprom.h
>> @@ -10,7 +10,7 @@
>>   #ifndef _EEPROM_
>>   #define _EEPROM_
>>
>> -#ifdef CONFIG_DRIVER_OMAP34XX_I2C
>> +#ifdef CONFIG_SYS_I2C_OMAP34XX
>>   int cm_t3x_eeprom_read_mac_addr(uchar *buf);
>>   u32 cm_t3x_eeprom_get_board_rev(void);
>>   #else
>
> Please, rebase on top of:
> http://patchwork.ozlabs.org/patch/275284/
> which should be applied any time soon.
>
> Otherwise,
> Acked-by: Igor Grinberg<grinberg at compulab.co.il>

Hmm.. I cannot see, that your patch is accepted ... but I looked in it,
and it looks good to me. So, I propose to add this patch to the i2c tree,
so I do the necessary changes in my patch when applying it to the
i2c tree (as they are trivial changes) ...

@Tom: Is this OK for you?

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany