[U-Boot] [PATCH 0/3] Add support for SPI based DataImage LCD panel

[Nikita Kiryanov]

This patch ports the Linux driver for DataImage SCF0403852GGU04 and
SCF0403526GGU20 LCD panels into U-Boot. As a preparation step, variable SPI word
length support is added to omap3_spi and the generic SPI interface.
Finally, the driver is used in cm_t35 board.

The SPI changes were tested with a Beagle I2C/SPI/MDIO Protocol Analyzer, and
also with a DataImage SCF0403 lcd as part of the DataImage driver test.

Patch number 3 depends on http://patchwork.ozlabs.org/patch/275283/

Cc: Tom Rini <trini at ti.com>
Cc: Anatolij Gustschin <agust at denx.de>
Cc: Igor Grinberg <grinberg at compulab.co.il>
Cc: Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>

Nikita Kiryanov (3):
  spi: omap3: add support for more word lengths
  lcd: add DataImage SCF0403x LCD panel support
  cm_t35: use scf0403 driver

 arch/arm/include/asm/arch-omap3/dss.h |   9 +-
 board/compulab/cm_t35/cm_t35.c        |  12 ++
 board/compulab/common/omap3_display.c |  46 +++++-
 drivers/spi/omap3_spi.c               |  78 +++++++--
 drivers/spi/omap3_spi.h               |  11 +-
 drivers/video/Makefile                |   1 +
 drivers/video/scf0403_lcd.c           | 298 ++++++++++++++++++++++++++++++++++
 include/configs/cm_t35.h              |   3 +
 include/scf0403_lcd.h                 |  22 +++
 include/spi.h                         |  14 ++
 10 files changed, 467 insertions(+), 27 deletions(-)
 create mode 100644 drivers/video/scf0403_lcd.c
 create mode 100644 include/scf0403_lcd.h

-- 
1.8.1.2