[U-Boot] [PATCH v6 1/2] I2C: Zynq: Support for 0-length register address
Michael Burr
michael.burr at logicpd.com
Tue Oct 15 21:12:04 CEST 2013
> Fixed bug with alen == 0 in 'i2c_write', 'i2c_read'
Further minor corrections:
> Write 'address' register before 'data' register.
> Write 'transfer_size' register before 'address' register.
Signed-off-by: Michael Burr <michael.burr at logicpd.com>
Cc: Heiko Schocher <hs at denx.de>
Cc: Michal Simek <monstr at monstr.eu>
---
Yet another try (v6)...
Tested:
Xilinx ZC702 eval board.
Write and read registers with addresses of length 0 and 1.
diff --git a/drivers/i2c/zynq_i2c.c b/drivers/i2c/zynq_i2c.c
index ce2d23f..9cbd3e4 100644
--- a/drivers/i2c/zynq_i2c.c
+++ b/drivers/i2c/zynq_i2c.c
@@ -187,20 +187,22 @@ int i2c_read(u8 dev, uint addr, int alen, u8
*data, int length)
* Temporarily disable restart (by clearing hold)
* It doesn't seem to work.
*/
- clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW |
- ZYNQ_I2C_CONTROL_HOLD);
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
writel(0xFF, &zynq_i2c->interrupt_status);
- while (alen--)
- writel(addr >> (8*alen), &zynq_i2c->data);
- writel(dev, &zynq_i2c->address);
+ if (alen) {
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW);
+ writel(dev, &zynq_i2c->address);
+ while (alen--)
+ writel(addr >> (8*alen), &zynq_i2c->data);
- /* Wait for the address to be sent */
- if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) {
- /* Release the bus */
- clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
- return -ETIMEDOUT;
+ /* Wait for the address to be sent */
+ if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) {
+ /* Release the bus */
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
+ return -ETIMEDOUT;
+ }
+ debug("Device acked address\n");
}
- debug("Device acked address\n");
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
ZYNQ_I2C_CONTROL_RW);
@@ -244,17 +246,18 @@ int i2c_write(u8 dev, uint addr, int alen, u8
*data, int length)
ZYNQ_I2C_CONTROL_HOLD);
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW);
writel(0xFF, &zynq_i2c->interrupt_status);
- while (alen--)
- writel(addr >> (8*alen), &zynq_i2c->data);
- /* Start the tranfer */
writel(dev, &zynq_i2c->address);
- if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) {
- /* Release the bus */
- clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
- return -ETIMEDOUT;
+ if (alen) {
+ while (alen--)
+ writel(addr >> (8*alen), &zynq_i2c->data);
+ /* Start the tranfer */
+ if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) {
+ /* Release the bus */
+ clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
+ return -ETIMEDOUT;
+ }
+ debug("Device acked address\n");
}
-
- debug("Device acked address\n");
while (length--) {
writel(*(cur_data++), &zynq_i2c->data);
if (readl(&zynq_i2c->transfer_size) == ZYNQ_I2C_FIFO_DEPTH) {
More information about the U-Boot
mailing list