[U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
albert.u.boot at aribaud.net
Wed Oct 2 15:36:03 CEST 2013
Hi Stefano,
On Fri, 27 Sep 2013 14:11:56 +0200, Stefano Babic <sbabic at denx.de>
wrote:
> Hi Albert,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit 8386ca8bea7a6a8469c3b6a99313afb642e6cbeb:
>
> Revert "standalone-examples: support custom GCC lib" (2013-09-12
> 10:27:29 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to ce7a7f5e6bda35d7d0972be07b6983552d1a2cb2:
>
> i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID (2013-09-27 13:53:35
> +0200)
>
> ----------------------------------------------------------------
> Andrew Gabbasov (1):
> mx6: Fix calculation of emi_slow clock rate
>
> Elie De Brauwer (1):
> mxs_nand: Fix ECC strength for NAND flash with OOB size of 224
>
> Eric Nelson (2):
> i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
> i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
>
> Fabio Estevam (17):
> mx6sabresd: Add LVDS splash screen support
> wandboard: Use imx6dl-wandboard.dtb for the solo version
> mx6sabresd: Avoid hang when HDMI cable is not connected
> mx6sabresd: Reset counter to prevent error message
> mmc: fsl_esdhc: Check the result from malloc()
> mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE
> mx6sabresd: Return error if cpu_eth_init() fails
> mx6qsabreauto: Return error if cpu_eth_init() fails
> net: fec_mxc: Add support for mx6 solo-lite
> mx6slevk: Add Ethernet support
> mx28evk: Fix checkpatch warning
> doc: README.mxs: Add instruction to install 'libssl-dev'
> mx6sabresd: Fix the fdt file for the mx6dl version
> net: fec_mxc: Fix timeouts during tftp transfer
> mx28evk: Propagate the error if cpu_eth_init() fails
> mx28evk: Propagate the error if cpu_eth_init() fails
> mx35pdk: Fix error handling in board_late_init()
>
> Marek Vasut (6):
> tools: mxsboot: Mark the FCB pages as valid
> ARM: mxs: Sort the mx23evk and mx23_olinuxino
> ARM: mxs: Document the power block initialization
> ARM: mxs: Receive r0 and r1 passed from BootROM
> ARM: mxs: Add Creative ZEN XFi3 board
> ARM: mxs: Add SanDisk Sansa Fuze+ board
>
> Markus Niebel (1):
> ARM: arch-mx6: fix PLL2_PFD2_FREQ
>
> Pierre Aubert (1):
> mx6: Fix use of improper value in enable_ipu_clock
>
> Robert Winkler (1):
> imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip
>
> Stefano Babic (1):
> Merge branch 'master' of git://git.denx.de/u-boot-arm
>
> York Sun (1):
> tools/imximage.c: Fix compiling warning
>
> trem (3):
> mx27: add missing constant for mx27
> apf27: add support for the armadeus APF27 board
> apf27: add FPGA support for the apf27 board
>
> arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 5 +
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 5 +-
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 209 +++++++++++
> arch/arm/cpu/arm926ejs/mxs/start.S | 50 ++-
> arch/arm/cpu/armv7/mx6/clock.c | 40 +-
> arch/arm/include/asm/arch-mx27/imx-regs.h | 6 +-
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/crm_regs.h | 2 +-
> arch/arm/include/asm/arch-mx6/iomux.h | 5 +
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 6 +-
> arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1 +
> arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 12 +
> arch/arm/include/asm/arch-mxs/sys_proto.h | 5 +-
> board/armadeus/apf27/Makefile | 33 ++
> board/armadeus/apf27/apf27.c | 256 +++++++++++++
> board/armadeus/apf27/apf27.h | 489
> +++++++++++++++++++++++++
> board/armadeus/apf27/fpga.c | 224 +++++++++++
> board/armadeus/apf27/fpga.h | 25 ++
> board/armadeus/apf27/lowlevel_init.S | 168 +++++++++
> board/bluegiga/apx4devkit/spl_boot.c | 4 +-
> board/boundary/nitrogen6x/nitrogen6x.c | 4 +-
> board/creative/xfi3/Makefile | 31 ++
> board/creative/xfi3/spl_boot.c | 134 +++++++
> board/creative/xfi3/xfi3.c | 224 +++++++++++
> board/denx/m28evk/m28evk.c | 2 +
> board/denx/m28evk/spl_boot.c | 4 +-
> board/freescale/mx23evk/spl_boot.c | 4 +-
> board/freescale/mx28evk/iomux.c | 4 +-
> board/freescale/mx28evk/mx28evk.c | 4 +-
> board/freescale/mx35pdk/mx35pdk.c | 10 +-
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 2 +-
> board/freescale/mx6sabresd/mx6sabresd.c | 169 +++++++--
> board/freescale/mx6slevk/mx6slevk.c | 68 ++++
> board/olimex/mx23_olinuxino/spl_boot.c | 4 +-
> board/sandisk/sansa_fuze_plus/Makefile | 31 ++
> board/sandisk/sansa_fuze_plus/sfp.c | 388 ++++++++++++++++++++
> board/sandisk/sansa_fuze_plus/spl_boot.c | 140 +++++++
> board/schulercontrol/sc_sps_1/spl_boot.c | 4 +-
> boards.cfg | 3 +
> doc/README.mxs | 5 +
> drivers/mmc/fsl_esdhc.c | 2 +
> drivers/mtd/nand/mxs_nand.c | 3 +
> drivers/net/fec_mxc.c | 4 +-
> drivers/net/fec_mxc.h | 4 +-
> include/configs/apf27.h | 388 ++++++++++++++++++++
> include/configs/mx35pdk.h | 1 -
> include/configs/mx6sabresd.h | 4 +
> include/configs/mx6slevk.h | 14 +
> include/configs/sansa_fuze_plus.h | 70 ++++
> include/configs/wandboard.h | 4 +-
> include/configs/xfi3.h | 69 ++++
> tools/imximage.c | 8 +-
> tools/mxsboot.c | 10 +-
> 53 files changed, 3269 insertions(+), 93 deletions(-)
> create mode 100644 board/armadeus/apf27/Makefile
> create mode 100644 board/armadeus/apf27/apf27.c
> create mode 100644 board/armadeus/apf27/apf27.h
> create mode 100644 board/armadeus/apf27/fpga.c
> create mode 100644 board/armadeus/apf27/fpga.h
> create mode 100644 board/armadeus/apf27/lowlevel_init.S
> create mode 100644 board/creative/xfi3/Makefile
> create mode 100644 board/creative/xfi3/spl_boot.c
> create mode 100644 board/creative/xfi3/xfi3.c
> create mode 100644 board/sandisk/sansa_fuze_plus/Makefile
> create mode 100644 board/sandisk/sansa_fuze_plus/sfp.c
> create mode 100644 board/sandisk/sansa_fuze_plus/spl_boot.c
> create mode 100644 include/configs/apf27.h
> create mode 100644 include/configs/sansa_fuze_plus.h
> create mode 100644 include/configs/xfi3.h
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list