[U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address

[Michal Simek]

On 10/16/2013 10:24 AM, Heiko Schocher wrote:
> Hello Michael,
> 
> Am 15.10.2013 22:23, schrieb Michael Burr:
>>> Fixed bug with alen == 0 in 'i2c_write', 'i2c_read'
>> Further minor corrections:
>>> Write 'address' register before 'data' register.
>>> Write 'transfer_size' register before 'address' register.
>>
>> Signed-off-by: Michael Burr <michael.burr at logicpd.com>
>> Cc: Heiko Schocher <hs at denx.de>
>> Cc: Michal Simek <monstr at monstr.eu>
>>
>> ---
>> Tested:
>> Xilinx ZC702 eval board.
>> Write and read registers with addresses of length 0 and 1.
>>
>> Change history:
>>> v2: put this in a series instead of by itself
>>> v3: fixed formatting problem in patch message
>>> v4: _really_ fixed this time!
>>> v5: yet another try
>>> v6: one more time
>>> v7: again
>>  > v8: After trying many times, I cannot get Patchwork to properly understand the diff in this message. As a workaround, please accept the diff in my patch of 2013-09-24, titled "[U-Boot] I2C: Zynq: Support for 0-length register address", which is 100%
>> equivalent to the patch in this message (1/2). It should still be applied before the patch in the second message (2/2).
> 
> Hmm.. please try to post a correct version of this patch, as I not
> really want to search the correct patch ... I am sure I will pick up
> the wrong version and I cannot test anything.
> 
> Thanks!
> 
> Hmm.. if you have problems with your commit message, you can reedit
> it:
> - get the commit id before your commit you want to edit
> - "git rebase -i commit-id"
>   -> you get a list of commits, see for help maybe here:
>      https://help.github.com/articles/interactive-rebase
> 
> Please remove the ">" in your commit message ... maybe this confuses
> patchwork ...

Albert is right. Just use patman -n to see your patches to get it done
correctly and then just use patman for sending.
There is nice README which describes everything what you need.

Thanks,
Michal



-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131016/dcb79f7f/attachment.pgp>