[U-Boot] [UBOOT][PATCHv5 0/6] Add TI qspi controller with memory mapped support.

[Sourav Poddar]

This patch series add support for TI qspi controller and in the process also
add support for quad read and memory mapped read
in mtd spi framework.

Testing details:
Did a boot from qspi mode on DRA7xx.
Testing details present in the last patch of
the series.

Currently, TI qpsi controller supports only 16MB access.
Access for higher MB area will be added later.

Patches are available at:
git://gitorious.org/u-boot-shared/u-boot-qspi.git qspi_v5


Matt Porter (3):
  omap5: add qspi support
  spi: add TI QSPI driver
  dra7xx_evm: add SPL API, QSPI, and serial flash support

Sourav Poddar (3):
  armv7: hw_data: change clock divider setting.
  sf: Add memory mapped read support
  README: qspi usecase and testing documentation.

 arch/arm/cpu/armv7/omap5/hw_data.c     |   10 +-
 arch/arm/cpu/armv7/omap5/prcm-regs.c   |    1 +
 arch/arm/include/asm/arch-omap5/omap.h |    3 +
 arch/arm/include/asm/arch-omap5/spl.h  |    1 +
 arch/arm/include/asm/omap_common.h     |    1 +
 board/ti/dra7xx/mux_data.h             |   10 +
 doc/SPI/README.ti_qspi_dra_test        |   48 +++++
 doc/SPI/README.ti_qspi_flash           |   47 +++++
 drivers/mtd/spi/sf_ops.c               |    2 +
 drivers/mtd/spi/sf_probe.c             |    1 +
 drivers/spi/Makefile                   |    1 +
 drivers/spi/ti_qspi.c                  |  318 ++++++++++++++++++++++++++++++++
 include/configs/dra7xx_evm.h           |   19 ++
 include/spi.h                          |    3 +
 14 files changed, 464 insertions(+), 1 deletions(-)
 create mode 100644 doc/SPI/README.ti_qspi_dra_test
 create mode 100644 doc/SPI/README.ti_qspi_flash
 create mode 100644 drivers/spi/ti_qspi.c