[U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver
Suriyan Ramasami
suriyan.r at gmail.com
Tue Oct 8 05:30:58 CEST 2013
Add LED activity for SMSX95XX USB Ether driver.
Signed-off-by: “Suriyan Ramasami" <suriyan.r at gmail.com>
---
drivers/usb/eth/smsc95xx.c | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
index 15fd9a9..7bf0a34 100644
--- a/drivers/usb/eth/smsc95xx.c
+++ b/drivers/usb/eth/smsc95xx.c
@@ -14,6 +14,12 @@
/* SMSC LAN95xx based USB 2.0 Ethernet Devices */
+/* LED defines */
+#define LED_GPIO_CFG (0x24)
+#define LED_GPIO_CFG_SPD_LED (0x01000000)
+#define LED_GPIO_CFG_LNK_LED (0x00100000)
+#define LED_GPIO_CFG_FDX_LED (0x00010000)
+
/* Tx command words */
#define TX_CMD_A_FIRST_SEG_ 0x00002000
#define TX_CMD_A_LAST_SEG_ 0x00001000
@@ -591,6 +597,14 @@ static int smsc95xx_init(struct eth_device *eth, bd_t *bd)
return ret;
debug("ID_REV = 0x%08x\n", read_buf);
+ /* Configure GPIO pins as LED outputs */
+ write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
+ LED_GPIO_CFG_FDX_LED;
+ ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
+ if (ret < 0)
+ return ret;
+ debug("LED_GPIO_CFG set\n");
+
/* Init Tx */
write_buf = 0;
ret = smsc95xx_write_reg(dev, FLOW, write_buf);
--
1.7.1
More information about the U-Boot
mailing list