[U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver

[Simon Glass]

+Joe (net maintainer)
+Marek (USB)

Hi Suriyan,

On Mon, Oct 7, 2013 at 9:30 PM, Suriyan Ramasami <suriyan.r at gmail.com>wrote:

> Add LED activity for SMSX95XX USB Ether driver.
>
> Signed-off-by: “Suriyan Ramasami" <suriyan.r at gmail.com>
> ---
>  drivers/usb/eth/smsc95xx.c |   14 ++++++++++++++
>  1 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
> index 15fd9a9..7bf0a34 100644
> --- a/drivers/usb/eth/smsc95xx.c
> +++ b/drivers/usb/eth/smsc95xx.c
> @@ -14,6 +14,12 @@
>
>  /* SMSC LAN95xx based USB 2.0 Ethernet Devices */
>
> +/* LED defines */
> +#define LED_GPIO_CFG                   (0x24)
> +#define LED_GPIO_CFG_SPD_LED           (0x01000000)
> +#define LED_GPIO_CFG_LNK_LED           (0x00100000)
> +#define LED_GPIO_CFG_FDX_LED           (0x00010000)
> +
>  /* Tx command words */
>  #define TX_CMD_A_FIRST_SEG_            0x00002000
>  #define TX_CMD_A_LAST_SEG_             0x00001000
> @@ -591,6 +597,14 @@ static int smsc95xx_init(struct eth_device *eth, bd_t
> *bd)
>                 return ret;
>         debug("ID_REV = 0x%08x\n", read_buf);
>
> +       /* Configure GPIO pins as LED outputs */
> +       write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
> +               LED_GPIO_CFG_FDX_LED;
> +       ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
> +       if (ret < 0)
> +               return ret;
> +       debug("LED_GPIO_CFG set\n");
> +
>

Seems good.

Acked-by: Simon Glass <sjg at chromium.org>


>         /* Init Tx */
>         write_buf = 0;
>         ret = smsc95xx_write_reg(dev, FLOW, write_buf);
> --
> 1.7.1
>
>