[U-Boot] [PATCH 1/4] mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin

Otavio Salvador otavio at ossystems.com.br
Tue Oct 22 01:34:57 CEST 2013


This removes the PAD_CTL_DSE_120ohm as done for i.MX6Q's IPU1_DI0_PIN4
pin definition and makes it aligned with 3.0.35-4.1.0 and 3.12
mainline kernel.

Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index b5df68a..7373407 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -210,7 +210,7 @@ enum {
 	MX6_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3	= IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN3__PL301_SIM_MX6DL_PER1_HADDR_10	= IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN3__LCDIF_CS		= IOMUX_PAD(0x03BC, 0x00A8, 8, 0x0000, 0, 0),
-	MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4		= IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+	MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4		= IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN4__LCDIF_BUSY		= IOMUX_PAD(0x03C0, 0x00AC, 1, 0x08D8, 1, 0),
 	MX6_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	= IOMUX_PAD(0x03C0, 0x00AC, 2, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN4__USDHC1_WP		= IOMUX_PAD(0x03C0, 0x00AC, 3, 0x092C, 0, 0),
-- 
1.8.4.rc3



More information about the U-Boot mailing list