[U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot

[Marek Vasut]

In case the board detected sufficient voltage for battery boot,
make sure the DCDC converter is ON and the board is not running
only from linregs, otherwise an instability will be observed.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
index 8ea45be..d25019a 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -654,6 +654,8 @@ static void mxs_batt_boot(void)
 	clrsetbits_le32(&power_regs->hw_power_5vctrl,
 		POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
 		0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+
+	mxs_power_enable_4p2();
 }
 
 /**
-- 
1.8.4.rc3