[U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files
Simon Glass
sjg at chromium.org
Sat Oct 26 07:01:35 CEST 2013
This seems more intuitive that the current #define way of doing things.
The resulting code is shorter, avoids the quoting and line continuation
pain, and also improves the clumsy way that stdio variables are created:
#ifdef CONFIG_VIDEO_TEGRA
#define STDOUT_LCD ",lcd"
#else
#define STDOUT_LCD ""
#endif
...
#define TEGRA_DEVICE_SETTINGS \
"stdout=serial" STDOUT_LCD "\0" \
...
The MEM_LAYOUT_ENV_SETTINGS variable is left in the header files, since
it depends on the SOC type and we probably don't want to add .emv files
for each board at this stage.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v3: None
Changes in v2:
- Add new patch to illustrate the impact on Tegra environment
board/nvidia/env/common.env | 79 ++++++++++++++++++++++++
include/configs/tegra-common-post.h | 120 +-----------------------------------
2 files changed, 80 insertions(+), 119 deletions(-)
create mode 100644 board/nvidia/env/common.env
diff --git a/board/nvidia/env/common.env b/board/nvidia/env/common.env
new file mode 100644
index 0000000..aca36a5
--- /dev/null
+++ b/board/nvidia/env/common.env
@@ -0,0 +1,79 @@
+#ifndef CONFIG_BOOTCOMMAND
+rootpart=1
+script_boot=
+ if load ${devtype} ${devnum}:${rootpart}
+ ${scriptaddr} ${prefix}${script}; then
+ echo ${script} found! Executing ...
+ source ${scriptaddr}
+ fi
+
+scan_boot=
+ echo Scanning ${devtype} ${devnum}...
+ for prefix in ${boot_prefixes}; do
+ for script in ${boot_scripts}; do
+ run script_boot
+ done
+ done
+
+boot_targets=
+boot_prefixes=/ /boot/
+boot_scripts=boot.scr.uimg boot.scr
+
+#ifdef CONFIG_CMD_MMC
+mmc_boot=
+ setenv devtype mmc
+ if mmc dev ${devnum}; then
+ run scan_boot
+ fi
+bootcmd_mmc0=setenv devnum 0; run mmc_boot
+bootcmd_mmc1=setenv devnum 1; run mmc_booxt
+boot_targets+= mmc1 mmc0
+#endif
+
+#ifdef CONFIG_CMD_USB
+#define BOOTCMD_INIT_USB run usb_init
+usb_init=
+ if ${usb_need_init}; then
+ set usb_need_init false
+ usb start 0
+ fi
+usb_boot=
+ setenv devtype usb
+ BOOTCMD_INIT_USB
+ if usb dev ${devnum}; then
+ run scan_boot
+ fi
+bootcmd_usb0=setenv devnum 0; run usb_boot
+boot_targets+= usb0
+#else
+#define BOOTCMD_INIT_USB
+#endif
+
+#ifdef CONFIG_CMD_DHCP
+bootcmd_dhcp=
+ BOOTCMD_INIT_USB
+ if dhcp ${scriptaddr} boot.scr.uimg; then
+ source ${scriptaddr}
+ fi
+boot_targets+= dhcp
+#endif
+
+bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
+#endif
+
+/* Decide on values for stdio */
+stdin=serial
+stdout=serial
+stderr=serial
+
+#ifdef CONFIG_TEGRA_KEYBOARD
+stdin+=,tegra-kbc
+#endif
+
+#ifdef CONFIG_USB_KEYBOARD
+stdin+=,usbkbd
+#endif
+
+#ifdef CONFIG_VIDEO_TEGRA
+stdout+=,lcd
+#endif
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index a3242fe..8465a1e 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -8,131 +8,13 @@
#ifndef __TEGRA_COMMON_POST_H
#define __TEGRA_COMMON_POST_H
-#ifdef CONFIG_BOOTCOMMAND
-
-#define BOOTCMDS_COMMON ""
-
-#else
-
-#ifdef CONFIG_CMD_MMC
-#define BOOTCMDS_MMC \
- "mmc_boot=" \
- "setenv devtype mmc; " \
- "if mmc dev ${devnum}; then " \
- "run scan_boot; " \
- "fi\0" \
- "bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
- "bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
-#define BOOT_TARGETS_MMC "mmc1 mmc0"
-#else
-#define BOOTCMDS_MMC ""
-#define BOOT_TARGETS_MMC ""
-#endif
-
-#ifdef CONFIG_CMD_USB
-#define BOOTCMD_INIT_USB "run usb_init; "
-#define BOOTCMDS_USB \
- "usb_init=" \
- "if ${usb_need_init}; then " \
- "set usb_need_init false; " \
- "usb start 0; " \
- "fi\0" \
- \
- "usb_boot=" \
- "setenv devtype usb; " \
- BOOTCMD_INIT_USB \
- "if usb dev ${devnum}; then " \
- "run scan_boot; " \
- "fi\0" \
- \
- "bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
-#define BOOT_TARGETS_USB "usb0"
-#else
-#define BOOTCMD_INIT_USB ""
-#define BOOTCMDS_USB ""
-#define BOOT_TARGETS_USB ""
-#endif
-
-#ifdef CONFIG_CMD_DHCP
-#define BOOTCMDS_DHCP \
- "bootcmd_dhcp=" \
- BOOTCMD_INIT_USB \
- "if dhcp ${scriptaddr} boot.scr.uimg; then "\
- "source ${scriptaddr}; " \
- "fi\0"
-#define BOOT_TARGETS_DHCP "dhcp"
-#else
-#define BOOTCMDS_DHCP ""
-#define BOOT_TARGETS_DHCP ""
-#endif
-
-#define BOOTCMDS_COMMON \
- "rootpart=1\0" \
- \
- "script_boot=" \
- "if load ${devtype} ${devnum}:${rootpart} " \
- "${scriptaddr} ${prefix}${script}; then " \
- "echo ${script} found! Executing ...;" \
- "source ${scriptaddr};" \
- "fi;\0" \
- \
- "scan_boot=" \
- "echo Scanning ${devtype} ${devnum}...; " \
- "for prefix in ${boot_prefixes}; do " \
- "for script in ${boot_scripts}; do " \
- "run script_boot; " \
- "done; " \
- "done;\0" \
- \
- "boot_targets=" \
- BOOT_TARGETS_MMC " " \
- BOOT_TARGETS_USB " " \
- BOOT_TARGETS_DHCP " " \
- "\0" \
- \
- "boot_prefixes=/ /boot/\0" \
- \
- "boot_scripts=boot.scr.uimg boot.scr\0" \
- \
- BOOTCMDS_MMC \
- BOOTCMDS_USB \
- BOOTCMDS_DHCP
-
-#define CONFIG_BOOTCOMMAND \
- "for target in ${boot_targets}; do run bootcmd_${target}; done"
-
-#endif
-
-#ifdef CONFIG_TEGRA_KEYBOARD
-#define STDIN_KBD_KBC ",tegra-kbc"
-#else
-#define STDIN_KBD_KBC ""
-#endif
-
#ifdef CONFIG_USB_KEYBOARD
-#define STDIN_KBD_USB ",usbkbd"
#define CONFIG_SYS_USB_EVENT_POLL
#define CONFIG_PREBOOT "usb start"
-#else
-#define STDIN_KBD_USB ""
#endif
-#ifdef CONFIG_VIDEO_TEGRA
-#define STDOUT_LCD ",lcd"
-#else
-#define STDOUT_LCD ""
-#endif
-
-#define TEGRA_DEVICE_SETTINGS \
- "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \
- "stdout=serial" STDOUT_LCD "\0" \
- "stderr=serial" STDOUT_LCD "\0" \
- ""
-
#define CONFIG_EXTRA_ENV_SETTINGS \
- TEGRA_DEVICE_SETTINGS \
- MEM_LAYOUT_ENV_SETTINGS \
- BOOTCMDS_COMMON
+ MEM_LAYOUT_ENV_SETTINGS
#if defined(CONFIG_TEGRA20_SFLASH) || defined(CONFIG_TEGRA20_SLINK) || defined(CONFIG_TEGRA114_SPI)
#define CONFIG_FDT_SPI
--
1.8.4.1
More information about the U-Boot
mailing list